Manual Velodyne Wi-Q12BVE (page 13 of 29) (English)

567745

Zoom out

Zoom in

1/29

Setup Wi-Q User’s Manual

Step 6: Run Auto-EQ

The automatic equalizer adjusts the subwoofer’s

sound to best suit its position in the room.

1. Remove the grille from the front of the subwoofer.

2. Insert the supplied mic into the supplied mic stand.

3. Plug the mic into the Mic jack on the front of the

subwoofer.

4. Place the mic in your preferred listening position.

5. On the remote, press EQ for about 2-3 seconds.

The subwoofer emits sweep tones that span

frequencies between 20 and 150 Hz. While

making the frequency sweeps, the LED displays

“AU” and the system adjusts fixed-frequency

graphic EQ filters for the flattest response at the

mic. When the sweeps are done, the unit saves

the settings and returns to normal operation.

6. To prevent accidentally activating Auto-EQ,

remove the mic from the Mic jack.

Step 7: Set the Phase

The Phase setting optimizes the transition from the subwoofer to the satellite speakers based on your

listening position. You can adjust the phase of the subwoofer’s output signal to correct any mismatch and

the resulting cancellation between the subwoofer and your main speakers/amplifier.

1. While listening to music, press each of the four PHASE buttons on the remote control. The phase

setting shows on the LED as “PH” followed by the phase number: 0, 90, 180 or 270.

2. Listen to the mid-bass transition for a few moments, and then press the next PHASE button.

3. Select the PHASE button that provides the smoothest transition between the subwoofer and the

satellite speakers, without peaks or dips. If the settings sound similar, use the “0” position.

MIC

Mic jack

Figure 6: Mic jack

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q12BVE in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velodyne Wi-Q12BVE Manual

Product: