1Read Instructions: All safety and operating instructions should be read before the product is operated.
2Retain Instructions: The safety and operating instructions should be retained for future reference.
3Heed Warnings: All warnings on the product and in the operating instructions should be adhered to.
4Follow Instructions: All operating and use instructions should be followed.
5Water and Moisture: To reduce the risk of fire or electric shock, do not expose the product to rain or moisture. The product should not be used
near water — for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, near a swimming pool or the like. Do not
expose the product to dripping or splashing fluids, and do not place objects filed with liquids, such as vases, on the product.
6Carts and Stands: The product should be used only with a cart or stand recommended by the manufacturer, or sold with the
product. When using a cart, use caution when moving the cart/product combination to avoid injury from tipping-over.
7Wall or Ceiling Mounting: The product should be mounted to a wall or ceiling only as recommended by the manufacturer.
8Ventilation: Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.The product
should be situated so that its location or position does not interfere with its proper ventilation. For example, the product should
not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation
such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.
9Heat: Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
10Power Sources: The product should be connected to a power supply only of the type described in the operating instructions or as marked on
the product.
11Grounding or Polarization: Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one
wider than the other. A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your
safety. When the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
12Power-Cord Protection: Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or
against them, paying particular attention to cords at plugs, convenience receptacles, and the point at which they exit from the product.
13Cleaning: Clean only with a dry cloth.
14Nonuse Periods: The power cord of the product should be unplugged from the outlet when left unused for a long period of time.
15Object and Liquid Entry: Care should be taken so that objects do not fall and liquids are not spilled onto the enclosure.
16Damage Requiring Service: Refer all servicing to qualified service personnel. Servicing is required when the product has been damaged in any
way, such as:
•The power-supply cord or plug has been damaged.
•Objects have fallen or liquid has been spilled into the product.
•The product has been exposed to rain or moisture.
•The product does not appear to operate normally or exhibits a marked change in performance.
•The product has been dropped or damaged.
17Lightning: For added protection for the product during a lightning storm or when it is left unattended and unused for long periods of time, unplug
it from the wall outlet.
18Overloading: Do not overload wall outlets, extension cords or integral convenience receptacles as this can result in a risk of fire or electric shock.
19Attachments: Only use attachments and accessories specified by the manufacturer.
20Voltage: Insure that the product is only connected to the rated source voltage. Failure to do so will result in damage to the product and possible
injury to the user.
Caution
To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.
Refer servicing to qualified service personnel.
The lightning flash with arrowhead symbol is intended to alert the user to the presence of uninsulated
“dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a
risk of electric shock to persons.
The exclamation point symbol is intended to alert the user to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the subwoofer.
Caution
To prevent electrical shock, match wide blade of plug to wide slot, fully inserted.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Velodyne Wi-Q10BVE at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Velodyne Wi-Q10BVE in the language / languages: English as an attachment in your email.
The manual is 4,31 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.