567742
24
Zoom out
Zoom in
Previous page
1/29
Next page
24
Wi-Q User’s Manual
Troubleshoot
Subwoofer’s blue display light (on front panel) doesn’t light up
1. Verify that the subwoofer is plugged into a live power outlet.
2. Verify that the subwoofer power switch (on the back of the subwoofer) is in the ON position.
3. Verify that the power cord is not damaged. If damaged, replace the cord.
4. Press the LIGHT button on the remote to verify that the subwoofer isn't in LED-off mode.
Subwoofer isn’t producing sound and blue display light (on front panel) is on
1. Verify that the transmitter is plugged into a live power outlet.
2. Verify that the transmitter’s inputs are connected to the audio receiver’s output. This wire may have become
accidentally disconnected.
3. Increase the subwoofer’s VOLUME level.
4. Increase the receivers LFE or SUB OUT volume level, if it’s adjustable.
5. If your receiver has a switch or menu to enable its LFE or SUB OUT, make sure this switch or menu is set to
ON or YES.
6. Verify that the transmitter’s light is on solid. If the transmitter’s light isn’t on solid and the same
CHANNEL is selected on both the transmitter and receiver, select another matching CHANNEL
for the transmitter and receiver.
7. Verify that your audio receiver or processor is in a bass management surround mode/input, and that the LFE
or SUB terminals are producing output. Typically "Direct" surround connections/modes bypass this and there
will be no output at these terminals.
8. Verify that the subwoofer is not in mute mode by pressing the MUTE button on the remote control.
Bass doesn’t sound loud enough
1. Increase the subwoofer’s VOLUME level.
2. Increase the receivers LFE or SUB OUT volume level, if it’s adjustable.
3. Put the subwoofer closer to a corner of your room.
Subwoofer output is distorted, intermittent or stops:
The subwoofer may have shut down due to the protection circuitry.
1. Reduce the volume setting; or
2. Shut the subwoofer off until normal operating conditions return.
The transmitter and audio receiver may have lost their broadcast connection.
1. Turn off power to the subwoofer, transmitter, and audio receiver.
2. Turn power back on to the transmitter, then the audio receiver, and then the subwoofer.
3. If cycling the power doesn’t re-establish the broadcast connection, select another matching CHANNEL
for the transmitter and subwoofer.
4. If selecting another CHANNEL doesn’t re-establish the broadcast connection, decrease the distance
between the subwoofer and the transmitter to increase the broadcast signal strength between them.
5. Verify that the transmitter and subwoofer aren’t in close proximity to other electronic devices
that could interfere with wireless transmission and reception. Turn all devices off except for the Wi-Q
transmitter, the audio receiver, and the subwoofer. Next, turn each of the other devices on/off until you
find the interfering device, and then increase the distance between the interfering device and the audio
system.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Wi-Q10BV at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Wi-Q10BV in the language / languages: English as an attachment in your email.

The manual is 4,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info