567747
7
Zoom out
Zoom in
Previous page
1/22
Next page
Audio cable
When using the audio cable, the audio signal is applied directly to the headphone speakers and all
electronics are bypassed. No function of the headphones will work when using the audio cable other
than simply playing the audio signal.
Charging headphones
Charging the vBold before using for the rst time is recommended in order to maximize battery life. Low
battery is indicated by the LED status indicator ashing red approximately every 10 seconds.
To begin charging, connect the USB cable (micro USB end) to the port behind the left ear cup. Connect
the other end of the USB cable to any charge capable USB port or a USB-style charger. Your vBold
headphones will begin charging, as represented by the red LED status indicator. Once charging is
complete, the LED status indicator will illuminate green.
Charge time About 1.5 hours
Talk time Up to 10 hours
Music playback time Up to 10 hours
Standby time Up to 100 hours
Fold your headphones
vBold headphones can fold for easier storage. To fold, remove any cables attached to the headphone
and push each ear cup inward towards the inside of the band.
Pairing headphones
1. Make sure vBold headphones and pairing device are within 1 meter of each other when pairing
2. Enable
Bluetooth
function on pairing device
3. Press and hold the power button on vBold until the LED ashes blue and red repeatedly
4. Search for
Bluetooth
devices on pairing device
5. Select Velodyne vBold from the “Devices Found” list on the pairing device (if you do not see
Velodyne vBold, repeat from step 1)
6. After successful pairing, the LED indicator will ash blue every 5 seconds
Note: Pairing is also possible by touching the center of the right ear cup with an NFC capable device.
vBold user’s guide
5
Reset functions
Software reset (paired device list reset) In off mode press and hold the power and volume
down (-) keys > 8 seconds. The LED indicator will
ash quickly alternating red and blue.
Hardware reset (use if the headset malfunctions
and is unresponsive)
While charging the headset press both the power
and volume up (+) keys.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne VBold at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne VBold in the language / languages: English, French as an attachment in your email.

The manual is 0,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info