Manual Velodyne SMS-1 (page 38 of 49) (English)

567863

Zoom out

Zoom in

1/49

www.velodyne.com

32 - Digital Drive SMS-1 User’s Manual

EQ curves. Each preset can have its own unique set of EQ settings. You can select which preset you want

to EQ by either positioning the cursor on a preset column on the SYSTEM SETTINGS screen then pressing

TEST, or by selecting the preset you want on the graph screen, with at the preset eld, or by pressing one

of the preset buttons on the remote.

You will note that presets 1-4 are shipped from the factory with predetermined settings, preset 5’s contour is set

at 0 level from the factory and customizable by the user (i.e. at), and preset 6 defeats all the EQs to demonstrat

the eect the equalization of the SMS-1 has on room response.

NOTE: You can select which preset is invoked at system startup by selecting it as shown:

24. As a nal thought on matching your subwoofer to your room, don’t forget the “objective listening” test.

That is, make sure the subwoofer sounds good to you! Often, you may want to add a bit more bass than

what would normally be considered “at” even after you remove the major peaks and valleys to achieve

a at frequency response. This is quite normal because human hearing “rolls o” rapidly below 100Hz,

causing the bass not to sound as loud. This is the basis for the “loudness contour” switch included on

many receivers and preamps. In order for the bass to sound at, especially at lower levels, you may need

to increase the SMS-1 volume in relation to the satellite speakers. An increase of about 5-8 dB is usually

adequate. There are three methods to accomplish this:

1. Raise the internal volume control for the LFE out in your surround receiver or processor, or,

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne SMS-1 in the language / languages: English as an attachment in your email.

The manual is 2,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velodyne SMS-1 Manual

Product: