567851
16
Zoom out
Zoom in
Previous page
1/26
Next page
www.velodyne.com
10 - SC-600D Amplier User’s Manual
SELECTING THE SUBWOOFER TO BE CONTROLLED
Your SC-600D amplier can control the Velodyne SC-600 Series subwoofers as well as generic passive
subwoofers.Specialinternalsoftwaresettingsaredesignedtomaximizeperformanceandreliabilitydepending
onthemodelofsubwooferbeingcontrolled,soitisimportanttomatchtheSC-600Damplierwiththesubwoofer
itiscontrolling.TheSC-600DampliercomeswithadefaultsettingfortheSC-600IWsubwoofer.Whenthe
unitisrstpoweredup,themodelbeingcontrolledisdisplayedfortwosecondsonthenumericLEDbeforethe
display reverts to the volume setting. The subwoofer to be controlled is shown as follows:
Note:BoththeIFandtheICsettingscontroltheSC-600In-Floor/In-Ceiling(IF/IC)subwooferandhaveidentical
internal settings.
Tochangethesubwoofertobecontrolled,rstpowerdowntheamplierusingthemainpowerswitchonthe
back panel (DO NOT use the power button on the front panel). Then, turn the switch on while depressing any
of the buttons on the front panel (crossover up or down, or volume up or down). The unit will show the model
it is currently controlling. To change the model, simply push the crossover up or crossover down buttons and
the model changes on the LED display. Once the desired model is seen on the LED display, simply release the
button. You don’t need to do anything else - the model to be controlled is automatically stored in the SC-600D
amp’s memory. To exit model selection mode, use the main power switch on the back panel to power down
and power up the unit. You should see the model you selected for two seconds on the LED display before the
display reverts to the volume.
Note: TheSC-600Dampliercancontrolonlyonesubwooferatatime,eithertheSC-600IWorSC-600IF/IC.
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne SC-600D at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne SC-600D in the language / languages: English as an attachment in your email.

The manual is 1,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info