Manual Velodyne SC-12 (page 18 of 30) (English)

567839

Zoom out

Zoom in

1/30

www.velodyne.com

12 - SC-1250 Amplier User’s Manual

model changes on the LED display. Once the desired model is seen on the LED display, simply release the

button. You don’t need to do anything else - the model to be controlled is automatically stored in the SC-1250’s

memory. To exit model selection mode, use the power switch on the back panel to power down and power up

the unit. You should see the model you selected for 2 seconds on the LED display before the display reverts to

the volume.

Using the SC-1250 to Drive Two Subwoofers

Oncethemodelselectionprocessiscompleted,nootheradjustmentsareneededtoenabletheSC-1250to

drive one or two subwoofers.

USAGE

Thissectionaddressesday-to-dayusageofyourSC-1250amplier.

Remote Control

The features of the SC-1250 remote control are listed below.

• POWER — This button forces your SC-1250 unit into standby

mode. The power LED turns amber, the numeric LED shuts

o,andtheamplierputsoutnopower.Theunitwillremain

in this mode until the POWER button is pressed again. To fully

deactivate (i.e. power down) the unit, press the power switch

on the front panel.

Note: The master power switch on rear panel must be on in

order for the front power button to function.

• MUTE — This button mutes the subwoofer. The LED on the

amplier will show 00 if the unit is muted. To unmute the

subwoofer, press the MUTE button again and the original

volume setting shows on the LED.

Figure 6: SC-1250 Remote.

• EQ — ThisbuttonautomaticallyEQsthesubwooferusinga7bandinternalgraphicequalizer.Tousethis

feature,rstplugthesuppliedmicrophoneintotheMic-Injackonthebackpanelofthesubwooferand

place the mic in your preferred listening position. Then, by pressing EQ on the remote, the subwoofer

emits12 “sweeptones” thatcover thefrequenciesbetween 20and 150Hz. TheLED displays“AU”

during the Auto-EQ process. After the sweeps are complete, the unit saves its EQ settings and returns to

normal operation. To prevent accidental invocation of the EQ feature, you must hold down the EQ button

for 2-3 seconds before the EQ sweeps begin.

Note:EachtimetheEQfeatureisutilized,theEQsettingsfortheSC-1250arereset.Ifthemicrophone

is not plugged in, the SC-1250 will emit one or two sweep tones then cease the EQ operation. In this

case, the previous EQ settings will be preserved.

• PHASE —Thesebuttonsallowyoutooptimizethesubwooferperformanceforthelocationandyour

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne SC-12 in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velodyne SC-12 Manual

Product: