567718
12
Zoom out
Zoom in
Previous page
1/20
Next page
www.velodyne.com
6 - Impact Series User’s Manual
5) VOLUME LEVEL knob - Use this knob to adjust the output level of the subwoofer.
(6) LOW-PASS CROSSOVER - Use this knob to select the high-frequency range at which you wish to
cuto the signal to the subwoofer.
(7) POWER INDICATOR - Red: Unit is in standby mode. Green: Unit is in operation mode. (automatically
turns to STANDBY mode if no signal for eight minutes)
REAR PANEL CROSSOVERS
Reciever/Processor Subwoofer Outputs
Your new subwoofer is equipped with both speaker-level and line-level inputs. Use the RCA/Phono type
“INPUT” jReceiver/Processor Subwoofer Outputs The Velodyne subwoofer is designed to operate using the full
range audio signal for input when using the built-in crossover. Many home theater processors/receivers (Dolby
Digital™, DTS™, THX™) have a “subwoofer out” jack (sometimes labeled “LFE”) that is internally ltered,
settable at the receiver/processor, and designed to be used with a powered subwoofer. In some installations,
it may be benecial to use BOTH the Velodyne crossover and the receiver/processor crossover, resulting in
a steeper ultimate crossover slope. In some rare cases, combining both an external crossover and the one
internal to the subwoofer may result in low output and increased noise. In these installations you may need to
bypass the crossover in either the processor or your Impact subwoofer, or simply setting one crossover to a
higher frequency (such as 120 Hz) will restore maximum performance.
(Refer to Figure 2a Line-Level Subwoofer Connection Diagram and Figure 2b Speaker-Level Subwoofer
Connection Diagram, pages 7 and 8 for connection diagrams.)
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Impact-Mini at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Impact-Mini in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info