567716
15
Zoom out
Zoom in
Previous page
1/20
Next page
www.velodyne.com
Impaact Series User’s Manual - 9
INTERCONNECT CABLES
When installing your new Velodyne subwoofer using the line level connections, you should always use shielded
phono cables. There are many high quality cables available today. It is recommended that you keep the length
of cable as short as possible to avoid any potential noise problems.
When using speaker level connections, use a high quality speaker cable that mates well withthe connectors.
Be very careful to avoid any loose strands or frayed wires that may result in ashort, which may damage your
equipment. Cables of extremely large size are not required due to the low current draw of this type of connection.
Extremely large gauge wire may not properly t in the terminals, resulting in a poor connection and possible
short circuits.
CARE OF YOUR SUBWOOFER
Your Velodyne subwoofer does not require any regular maintenance. Normal dusting or cleaningof the surface
for appearance purposes is all that is required. We suggest you avoid any harsh detergents or chemicals when
cleaning the cabinet. Abrasives, detergents, or cleaning solutions may damage the nish on the cabinet. We
recommend using only a damp cloth to clean the cabinet.
During normal conditions, your new subwoofer may be left on continuously without anyproblems. The unit is
equipped with a signal-sensing turn on/o that will automatically turn onthe unit when a signal is present at the
inputs and turn o the unit after several minutes whenthere is no longer any signal at the inputs.
PROTECTION CIRCUITRY
Your new subwoofer is equipped with circuitry to provide maximum performance withgreatest reliability.
The unit is protected against:
1) Overheating the amplier.
2) Excessive drop in power line voltage.
If either of the above should happen, you should reduce the volume setting or shut the unit o until normal
operating conditions return. You may also want to plug the unit into a dierent wall outlet, as dropping power
line voltage will be most noticeable under strenuous conditions and may result in the unit shutting down
intermittently.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne Impact-10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne Impact-10 in the language / languages: English as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info