567711
25
Zoom out
Zoom in
Previous page
1/40
Next page
SYSTEM RESPONSE SCREEN
From the Introductory screen you can get to the System Response screen which is used to display the frequency response graph for the
subwoofers output. See Figure 3. See the Remote Control Button Sequence Commands table on page 25 for the button sequence.
The System Response screen has the following information and features on it:
A
system response graph that shows the subwoofers low frequency output from 15 to 200 Hz.
A moving screen pixel marks on the frequency response curve the current frequency of the sweep tone that is playing.
8 parametric filters each of which can be used at its current frequency or adjusted to a frequency and Q you desire between 15
and 200 Hz when in Manual-EQ mode.
The filter level range is -13db to +6dB although the screen is only marked from -12dB to +6dB.
Status Messages
Status messages appear in the upper left hand corner of the TV screen. In Figure 3, the status message is LOW SIGNAL. The following
status messages appear in this position on the
TV screen:
MIC?: The subwoofer is receiving no signal from the microphone. Microphone is not connected, or either the microphone
or the cable is damaged.
SYNCING: The subwoofer is trying to synchronize its frequency measurement with the frequency of the sweep tone being
played through your audio system.
SYNCED: The subwoofer has synchronized its frequency measurement with the frequency of the sweep tone being played
through your audio system.
LOW SIGNAL: The receiver output level is too low to perform optimization. Turn up the receiver volume. After 6 sweeps with
this condition, the subwoofer will reboot.
HIGH SIGNAL: The receiver output level is too high to perform optimization. Turn down the receiver volume.
VOL..: Auto-EQ
PLUS
is adjusting subwoofer volume.
CRS..: Auto-EQ
PLUS
is adjusting subwoofer crossover frequency.
SLP..: Auto-EQ
PLUS
is adjusting subwoofer crossover filter slope.
PHS..: Auto-EQ
PLUS
is adjusting subwoofer phase. Auto-EQ
PLUS
doesn’t adjust the polarity of the signal, but rather goes
right to adjusting the phase.
Screen Navigation
You can go to the System Settings screen using the NEXT option in the upper right hand corner of the screen.
Figure 3: System Response Screen
[ 23 ]
Digital Drive
PLUS
User Interface Manual
TV SCREEN USER INTERFACE FOR OPTIMIZATION
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne DD-18plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne DD-18plus in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Velodyne DD-18plus

Velodyne DD-18plus Quick start guide - English - 2 pages

Velodyne DD-18plus User Manual - English - 42 pages

Velodyne DD-18plus Quick start guide - German - 2 pages

Velodyne DD-18plus User Manual - German - 20 pages

Velodyne DD-18plus User Manual - German - 36 pages

Velodyne DD-18plus Quick start guide - French - 2 pages

Velodyne DD-18plus User Manual - French - 47 pages

Velodyne DD-18plus User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info