567711
16
Zoom out
Zoom in
Previous page
1/40
Next page
2) Connect your subwoofer’s front panel USB port to your computer using the supplied USB cable. Refer to the Digital Drive
PLUS
Users Manual for directions on how to remove the subwoofers front grille to access the USB port.
3) The program establishes communication with the subwoofer and indicates this by displaying Connected or Connected, Not Synced
in the program’
s title bar and in the lower left corner of the window in the Subwoofer/EQ Status Line.
4) Once communication is established, the subwoofer model and serial number appear at the top of the Frequency Response
Graph area.
5) Once you see the Connection message, you can use the program to control the subwoofer
.
6) See the Troubleshooting section of this part of the manual if you don’t see the Connection message.
Refer to the Digital Drive
PLUS
Users Manual for more information about the different optimization methods and setup options.
MAKING & SAVING PRESET CHANGES
The simplest customization of parameters you can do is to make and save changes to the presets.
You can modify the preset parameters either in the Preset Parameter Settings area on the Frequency Response and Parameters screen
or on the Preset screen. The Preset screen has the advantage that you can see settings for all the presets at one time and also modify the
night mode and power on settings. The Frequency Response and Parameters screen has the advantage that you don’t have to open the
Preset screen.
See the Digital Drive
PLUS
Users Manual for a detailed explanation of the preset parameter settings that you can modify.
To modify the presets using the Preset screen:
1) On
the Frequency Response and Parameters screen, click Next (upper right hand corner).
• Some values are changed with pull-down menus, like the slopes, whereas others increment with up/down buttons.
The parameter input fields can also be selected with the mouse and the value typed into them.
2) Click Previous to return to the Frequency Response and Parameters screen.
3) Click Save to DD+ to save the preset setting changes to the subwoofers memory.
4) Click Save to File to save the preset changes to a file on your computer. Velodyne recommends this practice as a way to “back up
your work” and to be able to retrieve subwoofer settings without having the subwoofer connected to your computer. Y
ou can also save
the settings using the File > Save menu option. Previously saved profile files can be retrieved using the File > Open menu option.
T
o modify the presets using the Frequency Response and Parameters screen:
1) In the Preset Parameter Settings area use the Preset pull down menu to select which preset to modify.
2) Use the pull down menus to change the preset parameter settings.
3) Click Save to DD+ to save the preset setting changes to the subwoofers memory.
4) Click Save to File to save the preset changes to a file on your computer.
RUNNING SELF-EQ OPTIMIZATION– YOUR FIRST EQ
The easiest EQ optimization to perform is the Self-EQ. With Self-EQ the subwoofer generates its own sweep tone.
To perform Self-EQ optimization:
1) Remove the microphone, mic cable and stand from the accessory kit. Carefully snap the microphone into the stand and attach the
larger end of the cable to it. See the Digital Drive
PLUS
Users Manual for more information.
2) Place the microphone at the main listening position.
3) Attach the small end of the mic cable to the jack on the left side of the subwoofer front control panel.
4) Make sure the subwoofer is on and your audio system is off.
[ 14 ]
Digital Drive
PLUS
User Interface Manual
WINDOWS INTERFACE FOR OPTIMIZATION
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne DD-18plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne DD-18plus in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Velodyne DD-18plus

Velodyne DD-18plus Quick start guide - English - 2 pages

Velodyne DD-18plus User Manual - English - 42 pages

Velodyne DD-18plus Quick start guide - German - 2 pages

Velodyne DD-18plus User Manual - German - 20 pages

Velodyne DD-18plus User Manual - German - 36 pages

Velodyne DD-18plus Quick start guide - French - 2 pages

Velodyne DD-18plus User Manual - French - 47 pages

Velodyne DD-18plus User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info