567709
17
Zoom out
Zoom in
Previous page
1/40
Next page
5) On the Frequency Response and Parameters screen, select the Self option in the EQ Optimization Option Selection and
Initiation area.
6) Click Start.
7) The subwoofer produces its own sweep tone and its frequency response.
8)
You can watch the subwoofer smooth its frequency response by adjusting the parametric EQ filter levels on the Frequency
Response and Parameters screen. Self-EQ doesn’t change the Setup preset parameters (volume, crossover
, etc.) Self-EQ
uses a 160 Hz crossover.
9) When Self-EQ finishes, the front subwoofer display shows End for 10 seconds, then the subwoofer reboots by turning itself off and
back on. The display shows the preset number and then volume level. During this process the new filter settings are saved into the
subwoofers memory.
10) Click Save to File to save the Setup preset’s EQ filter settings to a DDP file on your computer.
The frequency response curve is only saved with Manual-EQ, not Self-EQ or
Auto-EQ
PLUS
.
RUNNING AUTO-EQ
PLUS
OPTIMIZATION – STEPPING UP IN POWER
The next level up in the Digital Drive
PLUS
EQ optimization methods is Auto-EQ
PLUS
optimization. To perform Auto-EQ
PLUS
optimization:
1) Set up the microphone as in the Self-EQ instructions above.
2) Make sure the subwoofer and your audio system are both on.
3) Place the Digital Drive
PLUS
Sweep Tone CD into your disc player and press play.
4) Once the sweep tone starts to play, adjust the receiver or processor output level to about the level of a normal-loudness conversation.
5) On the Frequency Response and Parameters screen, select the Auto option in the EQ Optimization Option Selection
and Initiation area.
6) Click Start.
7)
The subwoofer not only adjusts the Setup preset EQ filter parameters as you watch, but it also adjusts the volume, crossover, slope,
and phase while these input fields are grayed out during the Auto-EQ
PLUS
optimization process.
8) You can also watch the status of the subwoofer in the process down in the lower right in the subwoofer/EQ status line.
9) When Auto-EQ
PLUS
optimization finishes, the front display shows End for 10 seconds, the subwoofer reboots by turning itself off
and back on. The display shows the preset number and then volume level. During this process the new filter settings are saved
into the subwoofers memory. When the subwoofer is rebooting, the Digital Drive
PLUS
Windows Setup Program shows the
subwoofer is Disconnected.
10) While the subwoofer is rebooting, shut of
f the Sweep Tone CD and remove it from the player.
11) When the subwoofer has finished rebooting, either the program and subwoofer reconnect automatically or you can
click DDPLUS > Reconnect in the menu.
12) Click Save to File to save the Setup preset’s EQ filter settings to a DDP file on your computer. You will need it to
perform the following Manual-EQ optimization instruction.
The frequency response curve is only saved with Manual-EQ, not Self-EQ or Auto-EQ
PLUS
.
RUNNING MANUAL EQ OPTIMIZATIONADJUST IT TO YOUR LIKING
In some particularly problematic rooms, it may be necessary to employ even further adjustment than the Auto-EQ
PLUS
. Manual EQ gives
enough flexibility to get the subwoofer response very flat:
1) Set up the microphone, subwoofer and Sweep Tone CD as in the Auto-EQ
PLUS
optimization instructions.
2) Set the system playback volume level as in the Auto-EQ
PLUS
optimization instructions.
3) On the Frequency Response and Parameters screen, select the Manual option in the EQ Optimization Option Selection
and Initiation area, then click Start.
4) W
atch the subwoofer/EQ status line until it says Connected, Not Synced and then Syncing.
[ 15 ]
Digital Drive
PLUS
User Interface Manual
WINDOWS INTERFACE FOR OPTIMIZATION
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne DD-12plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne DD-12plus in the language / languages: English as an attachment in your email.

The manual is 1,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Velodyne DD-12plus

Velodyne DD-12plus Quick start guide - English - 2 pages

Velodyne DD-12plus User Manual - English - 42 pages

Velodyne DD-12plus Quick start guide - German - 2 pages

Velodyne DD-12plus User Manual - German - 20 pages

Velodyne DD-12plus User Manual - German - 36 pages

Velodyne DD-12plus Quick start guide - French - 2 pages

Velodyne DD-12plus User Manual - French - 47 pages

Velodyne DD-12plus User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info