567708
22
Zoom out
Zoom in
Previous page
1/42
Next page
Connect the Digital Drive
PLUS
using Dual Inputs
The Digital Drive
PLUS
has dual inputs; line-level RCA and speaker-level. You can use these dual inputs for dual systems and dual connections
t
o a single system.
G
uidelines for using this feature:
Adjust the input level from each system for proper balance.
The line-level and speaker-level controls on the subwoofer’s back panel act as attenuators, so you can turn down the feed
from the system with the higher level.
• If NOT using dual inputs, then set both level controls on the back panel to MAX.
The XLR inputs bypass these input level controls, but you can still adjust the speaker-level input down to match the
XLR input, if the speaker-level signal is greater than the XLR-signal level.
Dual Systems
The Digital Drive
PLUS
allows for connection into two audio systems at one time; one through the line-level RCA inputs and one through the
speaker-level inputs. This makes the setup easy for sharing the subwoofer with a surround system and a 2-channel music system.
Dual Connections
Some listeners find an audible benefit in simultaneously connecting a subwoofer’s line-level and speaker-level connections to the same
receiver
. To easily make these simultaneous connections:
1. Connect the speaker-level connection from the receiver output to the speaker-level input on the Digital Drive
PLUS
.
2. Connect the LFE (or L+R) line-level signals from your receiver to the line-level input on the Digital Drive
PLUS
.
These dual connections aid in filling in the missing mid-bass in single systems with thin mid-bass. The single-system connection runs the
Digital Drive
P
LUS
subwoofer off of the signal voltage applied to the satellites, but modified by the satellite impedance. This connection allows
the Digital Drive
P
LUS
subwoofer to more naturally and seamlessly blend with your satellite speakers. If you feel your system’s mid-bass is thin
based on your listening preferences, use dual connections and evaluate if your system’s mid-bass sounds better.
Connect into a Dual System
To share the Digital Drive
PLUS
using its dual inputs for dual systems:
1) Connect the 2-channel music system to the subwoofer’s speaker-level inputs. Follow the connections in the Connect section.
Be sure to connect + to + and – to –.
2) Connect either the LFE signal or the line-level left and right signal from the surround system to the subwoofer
s line-level RCA
input
depending on the system type and connection availability.
3)
Choose which system requires the more critical alignment. Which one will you listen to more or which one requires the more precise
alignment? W
e refer to this as the primary system and the other as the secondary system.
4) Listen to both systems with the line-level and speaker-level controls on the back of the Digital Drive
PLUS
at MAX (knobs
all the way to the right).
5) Turn the subwoofer volume up so that both systems at least match the main speaker output and sound fairly balanced in level.
6) Turn down the level control (line or speaker) on the system that has too much bass compared to the main speakers when
that system is running.
7)
T
urn the secondary system off.
T
urn on and optimize the primary system using Place & Play, Self-EQ, Auto-EQ
PLUS
, or Manual-EQ.
See how to perform these optimization procedures in the Optimize section.
8)
T
urn off the primary system and turn on the secondary system. It should be close to the correct level, but you can adjust a little
more if you want. Do not change the primary system’s level control or you will have to start from Step 4 again.
Be sure to play only one system at a time. Be sure to at least turn off the preamp and power amp or receiver of the second system.
Playing both systems at the same time can result in damage to the audio components in both systems.
[ 19 ]
D
igital Drive
P
LUS
U
ser’s Manual
CONNECT
22


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velodyne DD-10plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velodyne DD-10plus in the language / languages: English as an attachment in your email.

The manual is 0,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Velodyne DD-10plus

Velodyne DD-10plus Quick start guide - English - 2 pages

Velodyne DD-10plus User Manual - English - 40 pages

Velodyne DD-10plus Quick start guide - German - 2 pages

Velodyne DD-10plus User Manual - German - 20 pages

Velodyne DD-10plus User Manual - German - 36 pages

Velodyne DD-10plus Quick start guide - French - 2 pages

Velodyne DD-10plus User Manual - French - 47 pages

Velodyne DD-10plus User Manual - French - 20 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info