596663

Velocity Micro Cruz R100 Manual

26
Zoom out
Zoom in
Previous page
1/31
Next page
Restoring your Cruz to factory settings
will wipe clean all applications, fi les,
and settings from your Cruz’ memory.
Proceed only if you understand this.
There are two steps to restoration of
the Reader, the fi rst is the install and
second is the touch screen calibration.
Please read these instructions for the
install portion of the process. After these
steps, see Section XVI on Recalibration to
complete the restoration process (pg 25).
Step 1
You will need to download the restoration file prior to continuing. Visit
Velocity Micro’s Support Hub at www.cruzreader.com or call 1-800-296-
4312 for help.
Step 2
Once you have downloaded the ZIP file, insert a standard SD card into
your computer’s media reader. Save the ZIP file to the root of the SD
card, not in any folder. DO NOT extract the contents of the ZIP file, leave
it as a ZIP archive.
Step 3
Remove the SD card from the PC and insert it into the external SD slot of
the Cruz Reader. (To be sure that you have sufficient power to complete
the update, attach your DC charger and confirm the unit is charging.)
Step 4
Hold the power button until the Power Off dialogue appears, then tap
Power Off. If the device will not power off, remove back cover, disconnect
battery for 5 seconds, then reconnect and replace cover.
Step 5
With the Cruz Reader powered off, press and hold the volume up button
(keep holding), then press and hold the power button at the same time.
Keep holding both buttons, the screen will read CRUZ first, and then the
Android robot and software package icons will appear on the screen with
a progress bar.
Step 6
You may now release the buttons and allow the process to complete.
When done, the Cruz load will reappear and the unit should then load
normally.
NOTE: If you see an Android robot with a triangle with an exclamation mark inside,
then the process failed, try again being careful to follow the instructions closely.
XVI. Factory Restore
RETURN TO TABLE OF CONTENTS
25
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velocity Micro Cruz R100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velocity Micro Cruz R100 in the language / languages: English as an attachment in your email.

The manual is 1,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info