765520
9
Zoom out
Zoom in
Previous page
1/15
Next page
16 17
3.5 Wandelassistentie
Wandelassistentie brengt de ets naar een
snelheid van 5km/u terwijl je ernaast wandelt.
Om deze functie te activeren:
- Breng met de knop de ondersteuning op -1
- het woord ‘WALK’ verschijnt op de display
- Hou vervolgens de knop ingedrukt. De
wandelassistentie blijft actief zolang je deze
knop ingedrukt houdt.
Opgelet: Gebruik deze functie alleen tijdens
het wandelen en niet tijdens het etsen.
3.6 Batter indicator
Wanneer de batterij leeg of bijna leeg is, be-
gint deze te pinken. Dit is het moment waarop
de batterij moet opgeladen worden. We raden
aan om een oplader aan te sluiten van zodra
er slechts 2 streepjes batterij over zijn. Hou er
ook rekening mee dat dit slechts een indicatie
is. De indicator op de batterij zelf is de meest
accurate.
4 INSTELLINGEN
Volg onderstaand stappenplan om de instellin-
gen te wijzigen.
1. Druk twee maal snel op de knop om in de
instellingen te gaan
2. Druk daarna op de knop om door de ver-
schillende parameters te scrollen
3. Druk twee maal snel op de knop om uit de
instellingen te gaan
4. Instellingen sluiten automatisch na 10 sec. af
De volgorde van de parameters is als volgt:
Data reset Kilometer / mijl Lichtsensor
Helderheid display Automatische afsluit
4.1 Trip reset = tC
Om het geheugen van de TRIP, MAXS en AVG
functies te resetten volg je volgende stappen:
1. Druk 2 maal snel op de toets om in de
instellingen te gaan
2. Druk vervolgens 1 maal op de toets om
te bevestigen (Y= yes) of op de toets om de
data niet te wissen (N=no)
3. Druk opnieuw 2 maal snel op de toets om
te bevestigen en uit de instellingen te gaan
4.2 Kilometer / ml = S7
Volg de stappen onder hoofdtuk 4 ‘INSTELLIN-
GEN’ om in de instellingen te gaan. Druk op de
/ knoppen om symbool km/h te wijzigen in
MPH en omgekeerd.
4.3 Lichtsensor = bL0
Hier kun je regelen bij welke hoeveelheid licht
de etsverlichting automatisch geactiveerd
wordt.
Volg de stappen onder instellingen om in de
instellingen te gaan. Op de locatie van de
snelheid wordt het symbool bL0 weergegeven.
Druk op de / knoppen om de waarde tus-
sen 1-5 te wijzigen. De standaardwaarde is 3.
4.4 Helderheid display = bL1
Volg de stappen onder instellingen om in de
instellingen te gaan. Op de locatie van de
snelheid wordt het symbool bL1 weergegeven.
Druk op de / knoppen om de waarde tussen
1-5 te wijzigen. De standaardwaarde is 3.
4.5 Automatische afsluit = OFF
Volg de stappen onder instellingen om in de
instellingen te gaan. Op de locatie van de
snelheid wordt het symbool OFF weergege-
ven. Druk op de / knoppen om de waarde
tussen 1 en 9 te veranderen. Dit nummer geeft
de vertragingstijd weer voor de display auto-
matisch afsluit. Dit is standaard 5 minuten.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veloci Spirit at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veloci Spirit in the language / languages: Dutch as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info