622075
10
Zoom out
Zoom in
Previous page
1/98
Next page
WS3080
V. 02 21/01/2015 10 ©Velleman nv
storm
snowstorm
clear night
cloudy night
Pressure sensitivity setting
The pressure threshold for weather forecasting can be set from 2 ~ 4hPa (default 2hPa). Areas that experience
frequent changes in air pressure require a higher hPa setting compared to areas where the air pressure is more
stable. For example when 4hPa is selected there must be a fall or rise in air pressure of at least 4hPa to change
the weather forecast icon.
Storm threshold sensitivity setting
When a dramatic change in pressure is measured the weather icons (rain and clouds) will begin to flash
indicating a storm. Similar to the general pressure sensitivity setting it is possible to adjust the storm threshold
sensitivity form 3 ~ 9hPa (default 4hPa). When there is a pressure drop higher that the threshold over a period
of 3 hours, the storm forecasting will be activated. The clouds, rain icon and tendency arrows will flash for 3
hours indicating the storm warning feature has been activated.
8.3 UV index
Index
intensity
description
code
0 ~ 2
low
no danger to average person
green
3 ~ 5
moderate
little risk of harm from unprotected exposure
yellow
6 ~ 7
extreme
high risk of harm from unprotected exposure
orange
8 ~ 10
high
very high risk of harm from unprotected exposure
red
11
+
very high
extreme high risk of harm from unprotected exposure
violet
Note: table based on average adult persons with pale skin and is for indication only. People with a sensitive
skin or children may already suffer from UV-related problems when exposed to even low UV intensities.
8.4 Reset to factory defaults
Press and hold the button [c] for ±20s to reset the base station to factory default settings.
Note that the memory is also cleared.
9. PC connection
The receiver can hold up to 4,080 weather data entries (with date and time) in its internal memory. This
memory is non-volatile (EEPROM) and will be preserved in case of a power failure (e.g. battery
replacement). When memory is full, the oldest data sets are overwritten.
It is possible to read, copy, store and print this memory data by connecting the receiver to a PC (not incl.)
running the appropriate software.
9.1 Minimum system requirements
operating system: Windows XP, Vista, 7, 8
web browser: Internet Explorer 6.0 or higher
processor: Pentium III, 500MHz
memory: 128MB (256MB recommended)
CD ROM drive + free USB port
9.2 Software installation
1. Place the included CD ROM into the reader of a suitable computer. Do not connect the receiver yet.
2. When the auto-run feature on the PC is enabled, follow the instructions on the screen. If not, open the
drive, locate the file setup.exe and double click it.
Note: make sure you are logged on to the system with an administrator account when installing or running
the software.
3. Select the installation language and click next.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman WS3080 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman WS3080 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info