Manual Velleman WS3080 (page 6 of 98) (English, German, Dutch, French, Polish, Portuguese, Spanish)

622075

Zoom out

Zoom in

1/98

WS3080

V. 02 – 21/01/2015 6 ©Velleman nv

15. Once testing is completed, you can mount the station on an outdoor pole (not incl.) using the included

clamps. Choose a suitable mounting location for the receiver. Commonly, the communication between the

two stations can reach a distance of 100m in the open field, provided that there are no obstacles such as

buildings, trees, vehicles, high-voltage lines, etc. Radio interference such as from PCs, radios and television

sets can entirely cut off the communication. Take this into consideration when choosing a mounting

location.

Notes:

 On the edges of the wind direction sensor [E] the direction is indicated (“N” = north, “E” = east, “S” =

south and “W” = west). Make sure these inscriptions match the real wind direction. Use a compass (not

incl.) when installing the station to position the direction sensor correctly.

 Make sure the solar panel is facing the sun to keep the transmitter batteries sufficiently charged.

7. Basic settings/operation

 Use the MENU button [a] to scroll through the available menus. Use the ENTER button [b] to select a mode

or accept a value.

 Change values with the  [c] or  [d] button

Notes:

 Keep the  [c] or  [d] button pressed to increase setting speed.

 Exit the menu setting at any time by pressing the HISTORY button [f] or simply wait 30s until the receiver

automatically returns to normal display.

 When not in setup, press the HISTORY button [f] to switch on the backlight for ±10s.

 All settings can also be made through the software (see §9 PC connection)

Refer to the table below for an overview of the menu and setting options.

Mode

Description

Time

LCD contrast

set LCD contrast 0~8 (default = 5)

Time zone

set applicable time zone:

-1 = GMT / 0 = GMT+1 / 1 = GMT+2 … (default = 0)

Time format

set time format 12h/24h (default = 12h)

Manual time

setting

set hour an minutes manually

Date

display mode

select the desired display mode:

day-month-seconds (default) / day-month-day of the week / alarm time

date/month format

select between DD-MM or MM-DD format (dM or Md)

year

set year

month/date

set month and date

alarm time

set the alarm time

Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,

the alarm icon appears.

Pressure

history

graph scale

set the bar graph scale to 12h or 24h for pressure history

Pressure

pressure display

mode

select between relative (rel) or absolute (abs) pressure (default = absolute)

pressure unit

select pressure unit: hPa, mmHg or inHg (default = hPa)

relative pressure

set the relative pressure level (only when relative pressure display mode was

selected)

high alarm

set the high alarm level

Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,

the alarm icon appears.

low alarm

set the low alarm level

Press the ALARM ON/OFF button to enable/disable the alarm. When enabled,

the alarm icon appears.

reset max

(both pressure [2] and max icon (between [14] and [15]) are flashing)

press and hold the ENTER button for ±3s to reset max value to current

measurement

reset min

(both pressure [2] and min icon (between [14] and [15]) are flashing)

press and hold the ENTER button for ±3s to reset min value to current

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Velleman WS3080 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Velleman WS3080 Manual

Product: