622070

Velleman WS1060 Manual

7
Zoom out
Zoom in
Previous page
1/77
Next page
WS1060
V. 02 – 26/04/2013 7 ©Velleman nv
Install the weather station as follows:
1. Make sure the outdoor unit is fully assembled and batteries are installed in outdoor unit and base station.
2. Place the outdoor unit and base station in the locations where you want them, and check if the
communication is working.
o If yes, continue with the next step.
o If no, change the location of the outdoor unit and/or base station until proper communication is
established.
3. Use the adjustable hoops (incl.) to attach the shaft of the outdoor unit to a mast [M]. Before you tighten
the screws, check if the weather station is positioned well, as described below.
4. On the edge of the wind direction sensor, there are markers [N] representing the north (N), east (E), south
(S), and west (W). Use a compass (not incl.) to position the device so that the markers correspond with
your real location: the N marker must be directed north, the E marker east… If you do not position the
sensor correctly, the wind direction measurement will be incorrect.
5. Use the bubble level [B] on the rain collector to position the device perfectly level.
6. Fix the device in its final position by tightening the screws on the adjustable hoops [M].
7. Configuring the base station
The base station has five keys for easy operation: SET, +, HISTORY, ALARM, and MIN/MAX.
Press SET to scroll through settings.
Press the + key to increase values, or the MIN/MAX key to decrease values.
Press and hold the + or MIN/MAX keys for 2 seconds to increase/decrease in larger steps.
The setting procedure will end automatically after 30 seconds if you press no keys; or you can exit the
setting procedure at any time by pressing HISTORY.
7.1 Quick display mode
You can quickly change the information that is displayed on the LCD screen of the base station. Indicators on
the display show which information is currently shown. Select the information to display as follows:
1. From normal mode, press SET.
The station is now in quick display mode.
2. Press SET to confirm the current setting and go to the next; use the + or MIN/MAX keys to change the
values.
Setting
Display
Description
Wind
(nothing)
Display the wind speed.
Gust
Display the gust speed.
Rainfall
1h
Display the rainfall in the last hour.
24h
Display the rainfall in the last 24 hours.
week
Display the rainfall in the last week.
month
Display the rainfall in the last month.
TOTAL
Display the total rainfall since the last reset.
Note: when the total rainfall quantity is displayed, you can reset it by
pressing and holding SET for 2 seconds.
Temperature
TEMP
Display the outdoor temperature.
WIND CHILL
Display the outdoor wind chill.
DEW POINT
Display the outdoor dew point.
3. To return to normal mode, press HISTORY.
7.2 Units, date and time
To specify units and date/time settings, proceed as follows:
1. From normal mode, press and hold SET for 2 seconds.
The station is now in settings mode.
2. Press SET to confirm the current setting and go to the next; use the + or MIN/MAX keys to change the
values.
Setting
Description
LCD brightness
Adjust the brightness of the LCD display from 0 to 8.
Time zone
Select your time zone, from -12 to +12.
In Europe, 0 = GMT+1; 1 = GMT+2; -1 = GMT.
… 7 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman WS1060 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman WS1060 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 2,85 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info