621964
5
Zoom out
Zoom in
Previous page
1/25
Next page
SMART CHARGER VL7198
5
SPEED/CHARGE CURRENT CONTROL
1. Power up the main unit.
2. Put the switch at the position of the desired
speed, and the corresponding LED will light
up at the top right of the unit.
3. As a general guideline, it is recommended
that "NORMAL" or "FAST" speed be used for
most batteries, and the "SLOW" speed setting
be used with batteries that have a small
capacity (i.e. less than 600mA), although the
optimal speed/charge current differs for each
type of battery.
SELF TEST MODE
1. This mode is designed to test whether the battery charger is fully
functional.
2. Do not place a battery pack on the charger.
3. Plug the AC/DC Adaptor into a convenient mains socket (If used in vehicle,
plug the DC plug into a cigarette lighter socket). Note : do not plug in the
charger yet.
4. Push the DISCHARGE button and hold it down, and then insert the plug
into the battery charger. One of the "SPEED" LEDs will light up. Release
the DISCHARGE button immediately, and the battery charger will go into
self test mode.
5. The self test mode LEDs will light up in the order of the chart downhere.
6. If the LEDs do not light accordingly, the battery charger is not fully
functional.
Use this
switch to
select the
desired
charging
speed
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman VL7198 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman VL7198 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info