622301

Velleman DVM894 Manual

11
Zoom out
Zoom in
Previous page
1/110
Next page
DVM894
V. 01 – 21/01/2015 11 ©Velleman nv
7.10 Temperature
TO AVOID ELECTRICAL SHOCK AND INJURY, DO NOT MEASURE THE SURFACE
OF THE OBJECT WITH AN ELECTRICAL POTENTIAL HIGHER THAN
60 VDC/24 VAC.
1. Plug the multi-function socket with the IN end in the VTempΩ Hz jack and
the COM end in the COM jack.
2. Insert the K-type thermocouple into the multi-function socket with the correct
polarity.
3. Set the rotary switch to the TEMP position.
4. Use the thermocouple to measure the temperature of the surface of the test
object.
5. Read the value on the LCD.
7.11 Transistor Gain
TO AVOID ELECTRICAL SHOCK AND INJURY, DO NOT TEST WITH VOLTAGES
HIGHER THAN 250 V AC/DC.
1. Plug the multi-function socket with the IN end in the hFE mA jack and the
COM end in the COM jack.
2. Set the rotary switch to the hFE position and select the proper range.
3. Determine if the transistor to be tested is either an NPN or PNP type, then
insert the three pins of the transistor into the corresponding holes of the
multi-function socket.
4. Read the approximate transistor gain on the LCD.
8. Cleaning and Maintenance
Instructions for Safe Maintenance
Meter calibration, maintenance, repair, and other operations can only be
performed by technicians who fully understand the meter and electrical shock
hazards. Do not attempt to repair or service the meter unless you are qualified
to do so and have the relevant calibration, performance test and service
information.
When performing meter maintenance, only use specified and approved
replacement parts.
Before opening the meter, disconnect all power supplies and make sure that
you have no static electricity to avoid damaging the meter components.
Be aware that there may be dangerous voltages remaining in some capacitors
in the meter even after powering off.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Velleman DVM894 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Velleman DVM894 in the language / languages: English, German, Dutch, French, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,22 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info