812548
25
Zoom out
Zoom in
Previous page
1/48
Next page
Kiddo Tilt 25
2. Then hand-tighten the hexagon socket screws to secure the head support system.
Figure 20: Adjusting the height of the head support
9.6.2 Removing the head support
Before removing the head support, carry out the following steps:
1. Turn the clamping lever (see Figure 21, item 2) by one turn to release the head support (see
Figure 21, item 3).
2. Remove the head support if necessary or adjust the height of the fixation piece (see Fi-
gure 21, item 4). The fixation piece ensures that the head support is reattached at the same
height if it has previously been removed from the product.
3. To attach the head support, slide it back into the clamps and hand-tighten the clamping
lever again.
Figure 21: Removing the head support
9.6.3 Adjusting the head support angle
The head support bracket consists of loose joint plates (see Figure 22, item 5) which can be
adjusted so that the head support is above the back support at the desired height and at the
desired angle.
1. Loosen the cap nuts (see Figure 22, item 6) by one turn and move the head support to the
desired position.
2. Hand-tighten the cap nuts again.
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Veldink4kids Kiddo Tilt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Veldink4kids Kiddo Tilt in the language / languages: English as an attachment in your email.

The manual is 4.32 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Veldink4kids Kiddo Tilt

Veldink4kids Kiddo Tilt User Manual - German - 48 pages

Veldink4kids Kiddo Tilt User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info