Addendum to VX-1 Li/Li+ Owner’s Manual to Include Lithium Battery Products
CHARGING THE LITHIUM BATTERY
(Page 26 Addendum)
The VX-1 Li/Li+ comes standard with a 2.4m (8 ft) charging cord which is located in the trunk under the pas-
senger seat. The male connector on the charging cord is specific to the country of use. See your authorized
Vectrix dealer if a specialized male connector is required for public charging stations unique to your area.
Use extension cords only when necessary and only on a temporary basis (See Appendix A).
To charge the VX-1 Li/Li+ open the trunk, remove the cord, close the trunk taking care to route the cord in the
designated slot in the trunk ring, and plug the VX-1 Li/Li+ into an appropriate 110v/60Hz or 220v/50Hz outlet.
Once plugged, in the onboard charger will automatically control the charging process. During the charging
process, the dashboard LCDs will be active. As the charge progresses, the battery level indicator on the right
LCD will increase in level in response to state of charge (SOC) of the battery.