TRACKER
Your watch has a very important function: the tracker.
So you’ll never be alone in a trail or a training.
You can connect with another mobile or a PC software.
It is only you who will decide with whom to connect. Nobo-
dy can connect with you without you knowing.
We will explain the different codes to use this function
properly:
To start the connection, ask the person who will tracker
send you an SMS containing the following code:
Connexion
Sending SMS from a mobile: 100, 000000
100: is connection request
000000: is the default password.
Your watch will answer him/her by SMS OK.
From this moment you are connected.
Change password
You must now change the default code ( 000000) and
remember, write it down.
When the mobile connected with you must send by SMS,
Code: 200,000000,123456
200: request to change password
000000: old password
123456: your new password( example ).
You will choose the one you want, it’s just an example.Your
watch will then answer him by SMS:
200, OK
Now you are connected with your new password.
Specic request of GPS, just position
The mobile connected send the following SMS message:
xy, 000000 or new password.
The watch answer your position
GPS continuously
500,000000,08,30
This means intervals of 30s with the GPS on and 8 mi-
nutes with the GPS off.
The watch will respond OK
Total control of the watch
Use this feature if you think you will put yourself in danger
because this code lets control your watch fully.
Give this possibility only to a trusted person.
The mobile will send the code 600, 000000
The watch will respond OK.
Add of a second mobile for tracking
Code sent by SMS 700.000000
The watch will respond OK
22