578344
42
Zoom out
Zoom in
Previous page
1/60
Next page
33
INSTRUCTION MANUAL
display in recall mode after concluding the measurement.
2. If the lap timer is running the residence period of the pulse frequency
in the selected training ranges is recorded (compare 12.1)
step 1 Preparing the recording:
- Set the training ranges automatically chapter 7.1, or manually chapter 7.2
- Select training program limit 1, limit 2, limit 3, chapter 7.3
- In the TIMER SETTINGS setting menu select the lap timer chapter 12.1
step 2 Starting/changing/interrupting laps:
Switch on/switch off the acoustic pulse signal
Start lap 1
Press concurrently:
¥ + End lap 1 and start lap 2 concurrently
Start next lap:
¥ + End lap 2 and start lap 3 concurrently...
Interrupt: Interrupt lap measuring (e.g. for recovery lap or
break)
You can interrupt each lap as often as desired, or end the lap and
record up to 50 individual laps.
step 3 Display the values (during a break or after ending the lap
training).
Prerequisite: The lap timer must be stopped ( )
Display data via the pulse menu LAP REC
Display of values for LAP 1 (Fig. display)
Center bar left: Average pulse on the lap
Center bar right: Average speed on the lap (IMPORTANT: no display in
walk mode)
Footer: Lap number and time of the lap
Changing the display of values for lap 2
Changing the display of values for lap 3
...
During or after lap training the pulse data can be displayed at any time:
Display data via the LIMIT LO HI pulse menu (display automatically
shows the times for the three ranges in %)
- Time above the high limit
- Time between the limit values
- Time under the low limit
step 5 Deleting all recorded lap data
4sec.
TIP: At the end of the training unit measure the recovery time or the
recovery pulse to determine your training status. See 7.4. Recovery
time and recovery pulse
NOTE for DATA RECORDING:
All lap data is also recorded when using DATA RECORDING (chapter
14) and is also transferred to the PC in the data transfer. With the aid
of the „PC-Sport“ training software the lap data can then be displayed
on the PC.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Z2 PC-Link at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Z2 PC-Link in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO Z2 PC-Link

VDO Z2 PC-Link User Manual - German - 60 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info