483657
9
Zoom out
Zoom in
Previous page
1/39
Next page
X VDO CYCLECOMPUTING
E P NL DK
DK NL P E
www.vdocyclecomputing.com X 
5.6 Indicador de intervalo de servicio
Con acceder a CICLO
SERVI/FIJAR. Confirmar con
M
.
CICLO SERVI/ENCENDIDO (con
se apaga). Confirmar con
M
.
CICLO SERVI/BICI 1
(con se cambia a Bici 2)
Confirmar con
M
.
BICI 1…FIJAR DISTAN/
CONTINUAR? Las cifras que
parpadean pueden ser ajustadas
con . Para acceder a la cifra
siguiente confirmar con
M
.
Repetir los pasos hasta que la última cifra
derecha parpadee. Confirmar con
M
.
BICI 1/FIJAR OK? Confirmar con
M
.
El display confirma: CICLO SERVI/FIJAR HECHO
Regreso automático a FIJAR DATOS/SELECCION
El indicador de intervalo de servicio le recuerda
que debe hacer controlar su bicicleta en fábrica.
Usted puede ENCENDER o APAGAR el intervalo
de servicio. Usted puede ajustar intervalos de
servicio individuales para las dos bicicletas. Si la
distancia del trayecto ajustada en el intervalo de
servicio ya fue andada:
B
el símbolo de intervalo de servicio parpadea
en el display .
B
En el renglón de información aparece
CICLO SERVI/BICI 1 o BICI 2.
Si esto sucede deberá realizar usted mismo el
chequeo recomendado de la bicicleta o enviar
la misma al técnico especializado para que la
controle. Presionar una tecla cualquiera.
Desaparece nuevamente el texto “CICLO SERVI”.
Al cabo de otros 50 Km. también desaparece el
símbolo de intervalo de servicio . También pue-
de apagar el símbolo que parpadea. Para ello,
introduzca nuevamente el intervalo de servicio.
Así se ajustan los intervalos de servicio:
Con acceder a FIJAR DATOS/
SELECCION. Confirmar con
M
.
Ahora se encuentra en el modo
de ajuste (presionando
C
durante 3 segundos regresa
nuevamente al modo de
funcionamiento).
El modo sleep se enciende si durante 5 minutos
no se han ejecutado impulsos de velocidad ni se
ha presionado ninguna tecla.
El modo sleep finaliza si se ejecutan nuevamente
impulsos de velocidad (al andar) o si se presiona
una tecla.
5.7 Modo Sleep (bajo consumo de energía)
Su ordenador VDO está equipado con una
función de modo sleep. En el modo sleep se
desconecta una gran parte del display para
ahorrar batería. Los intervalos de tiempo
y servicio se continúan mostrando.
Con acceder a DATA RESET/
SELECCION. Confirmar con
M
.
Con se accede a los datos
que desea reiniciar.
B
DATA RESET/DAT RECORRID
O
B
DATA RESET/ODO TOTAL
Confirme su selección con
M
.
Pregunta “Selected Data”/RESET?
ATENCIÓN: Este paso no puede deshacerse.
Confirmar con
M
sólo si se desea borrar los datos
seleccionados. El display confirma: DATA RESET/
RESET HECHO. Regreso automático a FIJAR DATOS/
SELECCION.
Con la función RESET se pueden reiniciar
B
DAT RECORRID
B
ODO TOTAL
En cada uno de los modos de reset se borran las
siguientes informaciones:
B
DAT RECORRID: recorrido diario, duración del
trayecto, velocidad promedio, velocidad
máxima.
B
ODO TOTAL: kilómetros totales, kilómetros de
Bici 1, kilómetros de Bici 2.
Con acceder a FIJAR DATOS/
SELECCION. Confirmar con
M
.
Ahora se encuentra en el modo
de ajuste (presionando
C
durante 3 segundos regresa
nuevamente al modo de
funcionamiento).
5.8 Función RESET
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO X10W at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO X10W in the language / languages: Dutch, Danish, Portuguese, Spanish as an attachment in your email.

The manual is 1,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO X10W

VDO X10W User Manual - English, German, French, Italian - 39 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info