578351
35
Zoom out
Zoom in
Previous page
1/37
Next page
19
GB
MC
1.0
6.2 Correction of actual altitude
While you ride, the airpressure changes due to your gain in altitude as well as due to a wether change.To correct that influence of the wether change you
can also adjust the actual altitude display at your MC 1.0.Should you see a sign indicating actual altitude and should this altitude differ from the display
readout at your MC 1.0, you can manually correct the actual altitude.
Step 1: Get any of the ALTI-informations in display
Step 2: Press the ALTI-button for 3 sec, the display will show “ENTER REAL ALTITUDE” and the actual value of the altitude.
Step 3: MODE 1 will decrease the value , MODE 2 will increase the value.
Step 4: After you have entered the corect real altitude, you leave the setting procedure by pressing ALTI-button for 3 sec.
7. Troubleshooting
This chart outlines possible malfunctions, their causes and removal.
malfunctions most likely cause removal solutions
irregular LCD readout computer software is not press AC-button at the rear of computer head to reset 
(i.e. after battery change) running smoothly
speed display does not appear check for proper distance between readjusting distance between sensor 
sensor and magnet and magnet. 
cable from sensor to computer broken  check cable and replace if necessary.  
computerhead is incorrectly twisted on  place computerhead on handlebar 
handlebar holder holder and twist until detent (CLICK) 
no wheelsize entered enter your wheelsize
Display fades or disappears battery in computer empty check battery and replace if necessary.
temperatures below -15°C (40°F) Back in normal temperatures, display picks up working correctly. 
dull display readout
No altitude readout  computer in sleep-mode, not activated press any button to activate computer
No altitude climbed indication no speed impulses processed see infomation "no speed display" above
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO MC 1.0 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO MC 1.0 in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO MC 1.0

VDO MC 1.0 User Manual - German - 37 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info