538682
5
Zoom out
Zoom in
Previous page
1/26
Next page
1
M2 WR
www.vdocyclecomputing.com/service
ENGLISH
Installation video
Operating video
Settings video
2
M2 WR
Preface
Pack contents
Table of contents
Congratulations
In choosing a VDO computer, you have opted for high-quality
device with first rate technology.
To optimally use the computer, we recommend that you read
this manual carefully. It contains full operating instructions
and many useful tips.
We hope you enjoy cycling with your VDO computer.
Cycle Parts GmbH
First, please ensure that the contents of this pack are
complete:
1 VDO computer
1 battery for the computer
1 universal handlebar bracket with cable and sensor
1 spoke magnet (clip magnet)
Cable ties for attaching the bracket and the sensor
1 quick-start instruction manual
Display ............................................................................ 03
Buttons .......................................................................... 03
Functions ....................................................................... 04
Operation while cycling ............................................... 05
Attaching the handlebar bracket and the sensor ...... 06
Inserting the computer into the bracket ................... 07
Function testing ............................................................ 07
Sleep mode ................................................................... 08
Settings ......................................................................... 09
Language ...................................................................... 09
Wheel circumference .................................................... 10
Unit ............................................................................... 13
Clock ............................................................................. 14
Speed indicator settings ................................................ 17
Total distance ................................................................ 18
Total ride time ............................................................... 19
Resetting trip data after the trip ................................ 21
Battery status indicator .............................................. 22
Replacing the battery in the computer ...................... 22
Terms of guarantee ...................................................... 23
Troubleshooting ............................................................ 24
Technical specifications .............................................. 24
3
M2 WR
Display
The VDO M2 WR has a large, easy-to-read display that can be
divided into three areas.
– The top line of the display shows the value for the
selected function.
– The middle line displays “am” or “pm” if the 12-hour
clock format is used. It also displays whether kmh or mph
has been selected for the speed indicator. On the left of this
line are arrows that indicate whether the current speed is
above or below than the average speed.
– The bottom line of the display shows the name of the
selected function in clear text.
Only ONE function at a time appears on the display.
To return to the speed indicator from a selected function,
e.g. ride time, press the SET button.
The SETTINGS can also be used to establish that the speed
indicator is automatically displayed from all other functions
after five seconds.
See page 17: Settings – speed indicator settings
Buttons
The VDO M2 WR has two buttons
SET
In function mode:
Return to the speed indicator
from any display function
Open setting mode
(press and hold the button)
In setting mode:
Open the setting
Confirm the setting once ready
Exit setting mode
and return to function mode
TOP
BOTTOM
MIDDLE
BIKE
In function mode:
Access functions
Reset trip data to zero
(press and hold the button)
In setting mode:
Scroll in the setting menu
Change the data to be set
4
M2 WR
Functions
The VDO M2 WR has the following functions
Current speed
With a wheel circumference of 2,155 mm,
the maximum possible speed is 199 kmh or 124 mph.
Current distance
The current distance counts up to 999.99 km or miles.
If this maximum value is exceeded, the counter restarts the
current distance calculation at zero.
Current ride time
The current ride time counts up to 99:59:59 HH:MM:SS.
If this value is exceeded, the ride time counter restarts at
zero.
Average speed
for the current trip
Maximum speed
for the current trip
5
M2 WR
1x
SET
BIKE
Functions
Current time
(in 24-h or 12-h format)
Total distance
(total for all day trips)
The total distance counts up to 99,999 km or miles.
If this value is exceeded, the total distance counter restarts at
zero.
If the unit is switched from miles to km and the conversion
result is greater than 100,000 km, the counter is reset to
zero.
Total ride time
(total for all day trips)
The total ride time counts up to 9,999:59 HHHH:MM.
If this value is exceeded, the total ride time counter restarts
at zero.
Operation while cycling
While cycling, the display functions can be accessed by
pressing the BIKE button.
Pressing the BIKE button shows the next function on the
display.
Only ONE function at a time is shown on the display.
To once again display the speed, the SET button must be
pressed.
The SETTINGS can also be used to enable the automatic
return to the speed indicator from all function displays.
See page 17: Settings – speed indicator settings
24-H format 12-H format
6
M2 WR
90°
1
2
4
5 7
 mm
3
Attaching the bracket and the sensor
Start by attaching the sensor and the magnet.
STEP 1
Place the rubber shim under the sensor. Attach the sensor to
the fork side that corresponds to the side on which you later
want to attach the computer to the handlebars (right or left)
using the cable ties supplied (loosely at first, do not pull tight
just yet).
ATTENTION: the sensor mark on the sensor should point to
the spokes. Depending on the space available, the sensor can
be fitted to the front, inside or back of the fork.
STEP 2
Attach the spoke magnet to an outside spoke. The rod-shaped
magnet core points toward the sensor with the VDO logo.
Align the magnet with the sensor marking on the sensor
at a distance of approx. 1- 5 mm.
STEP 3
Align the sensor and the magnet in their final positions and
fasten them in place: pull the cable ties tight and push the
magnet in firmly.
STEP 4
Move the cable along the fork until it reaches the fork bridge.
From there, wind the cable further along the brake line until it
reaches the handlebars.
STEP 5
Decide whether you want to use handlebar or stem attach-
ment and rotate the base of the handlebar bracket by 90°
accordingly. To do so, undo the screws on the bracket,
remove the foot and rotate it 90° then insert and tighten
the screws again.
ATTENTION: do not overtighten the screws.
STEP 6
Guide the cable ties through the slot in the handlebar bracket,
place around the handlebars or the stem and pull (do not pull
tight just yet).
STEP 7
For handlebar attachment: align the computer angle
to achieve optimum readability.
Now pull the cable ties tight.
Use clippers to snip off protruding cable ends.
A helpful attachment video can be found on our website.
www.vdocyclecomputing.com/service
SENSOR
7
M2 WR
. LOCK . CLICK
. UNLOCK
UNLOCK
LOCK
Inserting the computer into the bracket
The VDO twist-click system securely connects the computer
to the handlebar bracket.
How to insert the computer:
STEP 1
Place the computer into the bracket in a 10 o’clock position.
STEP 2
Rotate the computer to the right into the 12 o’clock position
and click it into the bracket system. A noticeable resistance
must be overcome to move it into place.
STEP 3
To remove the computer, rotate it to the left (without pushing
or pulling).
Memory aid: Rigid to the Right, Loose to the Left
Function testing
Once the sensor has been attached, check that it functions
correctly.
How to test the computer:
Insert the computer into the bracket.
Lift and spin the front wheel.
A speed should now be displayed on the computer.
If no speed is displayed, there can be several reasons for this.
The possible reasons are described in the “Trouble-
shooting” section.
8
M2 WR
Sleep mode
If you take a break and the M2 is in the bracket,
the computer switches to sleep mode after five minutes.
If you set off again after a break, the VDO M2 has an
auto-start function.
The VDO M2 instantly switches back to the function mode
and the current speed are once again displayed.
9
M2 WR
Settings – language
The following display languages can be selected for the
VDO M2 WR:
– German
– English
– French
– Italian
– Spanish
– Dutch
– Polish
Do this as follows:
Press and hold the SET button until the settings menu
opens.
“Language” appears on the display.
Press SET to open the language setting.
English flashes.
You can now press the BIKE button to select a different
language.
Press the SET button to confirm your language setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WLRreturns to function mode.
10
M2 WR
1x
You can set the roll circumference of your wheel on the
VDO M2 WR.
The more accurate this setting, the more accurate your speed
indicator and the measurement of the distance you have
travelled.
You can find the values for your wheels in the wheel size table
and set these in the device.
If your wheel size is not listed in the table, you can accurately
measure the roll circumference.
This is done as follows:
STEP 1
Stand your bike up and position the front wheel so that the
valve is directly on the ground. Ensure that the tyres are fully
pumped up in accordance with the usage instructions. Mark
the position of the valve on the ground with a line or adhesive
strip.
STEP 2
Now push your bike forwards in a straight line until the valve
is back on the ground after one rotation.
Again mark the position of the valve on the ground with a line
or adhesive strip.
STEP 3
The distance between the two marks corresponds to your
wheel circumference or wheel size in millimetres.
Settings – wheel circumference
Wheel circumference in mm/inches
Tyre size ETRTO
KMH
Wheel
circumference
in mm
MPH
Wheel
circumference
in inches
16 x 1.75 47-305 1,272 50.1
20 x 1.75 47-406 1,590 62.6
24 x 1.75 47-507 1,907 75.1
26 x 1.5 40-559 2,026 79.8
26 x 1.75 47-559 2,070 81.5
26 x 1.9 2,089 82.2
26 x 2.00 50-559 2,114 83.2
26 x 2.10 54-559 2,125 83.6
26 x 2.25 57-559 2,145 84.4
26 x 2.35 60-559 2,160 85.0
26 x 2.40 62-559 2,170 85.4
28 x 1.5 40-622 2,224 87.6
28 x 1.6 42-622 2,235 88.0
28 x 1.75 47-622 2,268 89.3
29 x 2.10 54-622 2,295 90.3
29 x 2.25 57-622 2,288 90.1
29 x 2.40 62-622 2,300 90.5
650 B 2,100 82.6
700 x 18C 18-622 2,102 82.8
700 x 20C 20-622 2,114 83.2
700 x 23C 23-622 2,095 82.5
700 x 25C 25-622 2,146 84.5
700 x 30C 30-622 2,149 84.6
700 x 32C 32-622 2,174 85.6
700 x 38C 38-622 2,224 87.6
11
M2 WR
How to set your wheel circumference:
Press and hold the SET button until the settings menu
opens.
Settings – wheel circumference
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the wheel
circumference.
Press the SET button to open the setting for the wheel
circumference.
The first two digits flash.
Press the BIKE button to set these digits to the desired
value.
Press the SET button to confirm your setting.
The third digit now flashes and is ready to be set.
Press the BIKE button to set this digit.
12
M2 WR
Press the SET button to confirm your setting.
The final digit on the right now flashes.
Press the BIKE button to set this digit.
Settings – wheel circumference
Press the SET button to confirm your setting.
Your wheel circumference setting is now complete.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
13
M2 WR
Use the unit settings to specify whether the speed should be
displayed in kmh or mph.
Press and hold the SET button until the settings menu
opens.
Settings – unit
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the unit.
Press the SET button to open the unit setting.
“KMH” flashes in the top line of the display.
Press the BIKE button to change the unit to “MPH”.
Press the SET button to confirm the setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
14
M2 WR
In the VDO M2 WR, you can set the clock in 12-hour AM/PM
format or 24-hour format.
Press and hold the SET button until the settings menu
opens.
Settings – clock
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the clock.
Press the SET button to open the setting for the clock.
To switch to the 12-hour AM/PM format,
press the BIKE button.
15
M2 WR
Press the BIKE button to set the hours.
Settings – clock
Press the SET button to confirm the hour setting.
The minutes then flash.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any further settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Setting the time in 24-hour format
Press theSET button to confirm the selection “24”.
The hours now flash on the display.
16
M2 WR
Press the BIKE button to set the hours.
The display information changes from “pm” to “am”.
Settings – clock
Press the SET button to confirm the hour/AM-PM setting.
The minutes now flash on the display.
Press the BIKE button to set the minutes.
Press the SET button to confirm the minute setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Setting the time in 12-hour AM/PM format
Press theSET button to confirm the selection “12”.
The hours now flash and “am“ or “pm” appears on the
display.
17
M2 WR
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the speed
indicator.
Auto Speed” appears on the display.
Settings – speed indicator settings
To access the setting, press the SET button.
The setting opens.
“OFF” means that the speed is NOT automatically shown on
the display again after a few seconds.
Press the BIKE button to change the setting to “ON”.
ON means that the speed indicator should automatically
be displayed after a few seconds when in any other display
function.
Press the SET button to confirm the setting.
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Here, you can set whether the speed indicator should
automatically be displayed after a few seconds when
in any other display function.
This is done as follows:
Press and hold the SET button until the settings menu
opens.
18
M2 WR
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the total
distance.
Settings – setting the total distance
Press the SET button to open the setting.
The left digit flashes.
Press the BIKE button to change the digit.
Once this digit has been set, confirm the setting
by pressing the SET button.
The next digit starts to flash and is ready to be set.
Press the BIKE button to change this digit.
Once this digit has also been set, confirm the setting
by pressing the SET button.
The next digit flashes.
Once all digits have been set, confirm the setting again by
pressing the SET button.
The response “Set Ok” appears on the display.
The set value is stored.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
You can set the total distance ridden on the VDO M2 WR. For
example, you can enter your data here at the start of a new
cycling season.
ATTENTION: the M2 WR has a data memory.
No data is lost when the battery is replaced.
The process is as follows:
Press and hold the SET button until the settings menu
opens.
19
M2 WR
“Language” appears on the display.
Press the BIKE button to scroll to the setting for the
total ride time.
Settings – setting the total ride time
Press the SET button to open the setting
for the total ride time.
The left digit of the hours setting flashes and
is ready to be set.
Press the BIKE button to set the value for this digit.
Press the SET button to confirm your setting.
The next digit on the left starts to flash and is ready to be set.
Press the BIKE button to set the value for this digit.
Press the SET button to confirm your setting.
Once you have set all four digits, confirm the setting again
by pressing the SET button.
The minutes setting is then opened.
You can set the total ride time on the VDO M2 WR.
E.g. you can set your total ride time (total ride time for all
trips) at the start of the new cycling season).
ATTENTION: the VDO M2 WR has a data memory.
No data is lost.
The process is as follows:
Press and hold the SET button until the settings menu
opens.
20
M2 WR
The response “Set Ok” appears on the display.
If you want to configure further settings,
press the BIKE button to access these.
If you do not want to configure any other settings,
press and hold the SET button.
The settings menu closes.
The VDO M2 WR returns to function mode.
Settings – setting the total ride time
Press the BIKE button to set the minutes.
Once the minutes have been set, confirm the setting
by pressing the SET button.
21
M2 WR
Resetting trip data after the trip
After each day trip, you can reset the data for this day trip to
zero. The VDO M2 WR is then ready for the next day trip.
ATTENTION: your total distance (total number of kilometres
ridden) and total ride time are not reset to ZERO.
The process is as follows:
Press and hold the BIKE button for a few seconds.
The text “RESET Tour Data” appears on the display.
If you continue to hold down the BIKE button,
the trip data is now reset to zero.
The following data is reset to zero:
– Distance
Ride time
Average speed
Maximum speed
22
M2 WR
!
OPEN CLOSE
NEW
OLD
 SEC.
1
2
3
Low battery indicator
The M2 WR has a low battery warning.
The text “Computer low” appears on the display.
Press the BIKE button to acknowledge this low battery
warning.
You can keep using the cycle computer for approx. a week.
Replace the battery as soon as possible on seeing the low
battery warning.
Replacing the battery in the computer
To ensure your cycle computer is fully functional,
we recommend replacing the battery annually.
ATTENTION: your settings, total distance and total ride time
information remain stored when you replace the battery.
NO data is lost.
You need a 3 V 2032 battery.
We recommend using a branded battery from Sony,
Panasonic, Varta or Duracell.
The process is as follows:
STEP 1
Use a coin to remove the battery compartment cover.
STEP 2
Remove the dead battery.
ATTENTION: Wait for 10 seconds before inserting the new
battery. The electronics need this time to recognise that the
battery is being changed.
STEP 3
Insert the battery into the computer housing
with the +pole up.
Ensure that the battery is not tilted.
Ensure that the rubber seal lies smoothly on the lid of the
battery compartment.
STEP 4
Insert the battery compartment cover into the opening and
use a coin to turn it to right as far as it will go.
23
M2 WR
Terms of guarantee
VDO Cycle Parts offers a 2-year guarantee on your VDO
computer,
starting from date of purchase. This guarantee
covers material and processing defects on the computer
itself, the sensor/transmitter and the handlebar bracket.
Cables, batteries and mounting materials are not covered by
the guarantee.
The guarantee is only valid if the affected components have
not been opened (exception: computer’s battery compart-
ment), no force has been used and there is no sign of wilful
damage.
Please store the purchase receipt in a safe place as it must
be submitted in the event of a complaint.
If your complaint is legitimate, you will receive a comparable
replacement device. You are not entitled to a replacement of
the identical model if the model in question is no longer in
production due to a model change.
Please contact the dealer from whom you purchased the
device for all complaints and guarantee claims. Alternatively,
send your complaint directly to:
Cycle Parts GmbH
Le Quartier Hornbach 13
67433 Neustadt/Weinstrasse
If you have any technical questions, please do not hesitate to
call our hotline on:
+49 (0) 63 21- 95 82 7 - 10
+49 (0) 63 21- 95 82 7 - 18
Our telephone hotline is available to assist you
between the hours of
10:00-12:00 and 15:00-17:00,
Monday to Friday
Additional technical information is available at:
www.vdocyclecomputing.com
We reserve the right to make technical changes in the course
of further development.
24
M2 WR
Troubleshooting
Error Possible cause Correction
Half segments on the display
(e.g. after a battery change)
Computer software not running
correctly after battery change
Remove and re-insert the battery
No speed displayed Distance from sensor to magnet too
great
Correct the sensor and magnet positions
No speed displayed Computer not properly clicked
into the handlebar bracket
Insert the computer into the handlebar
bracket and rotate it as far as possible
(“click”)
No speed displayed Wheel circumference is not correctly set
or is at zero
Set the wheel circumference
No speed displayed Battery in the transmitter is dead Replace the battery in the transmitter
Display becomes weak Battery dead Check the battery, replace if nec.
Technical specifications
Computer:
Approx. 49 H x 38 W x 16 D mm
Display:
H approx. 39 mm, W approx. 29 mm
Computer weight:
Approx. 28 g
Handlebar bracket weight:
Approx. 10 g
Computer battery:
3V, type 2032
Computer battery service life:
Approx. 1 year (approx. 10,000 km/6,000 mi)
Temperature indicator range on the display:
-20°C to +70°C/ -4°F to +158°F
Speed range for wheel size 2,155 mm:
Min 2.5 km/h,
Max 199 km/h
Ride time measurement range:
Up to 99:59:59 HH:MM:SS.
Trip distance odometer measurement range:
Up to value 999.99 km or mi
Total km measurement range:
Up to value 99,999 km or mi
Total ride time measurement range:
9999:59 HHHH:MM
Wheel circumference setting range:
From 100 mm to 3999 mm (3.9 to 157.4 inches)
25
M2 WR
Correct disposal of this product (electrical waste)
(To be used in EU countries and other European
countries with a separate collection system). The
labelling on the product and the relevant literature
indicates that it must not be disposed of with normal house-
hold waste at the end of its service life. Please dispose of
this device separately to other waste so as not to harm the
environment or human health through uncontrolled waste
disposal. Recycle the device to promote the sustainable reuse
of material resources. Private users should contact the retailer
from whom they purchased the product or the responsible
authorities to find out how they can recycle the device in
an environment-friendly manner. Commercial users should
contact their suppliers and consult the conditions of the sales
agreement. This product must not be disposed of with other
commercial waste.
EU declaration of conformity
We, CYCLE PARTS GmbH, Le Quartier Hornbach 13,
D-67433 Neustadt/Weinstraße, declare that when used as
intended, the VDO cycle computer VDO M2 WR complies with
the essential requirements established in the CE Directives.
The declaration of conformity can be found at:
www.vdocyclecomputing.com.
Neustadt, October 2013
www.vdocyclecomputing.com
Cycle Parts GmbH
Le Quartier Hornbach 13
67433 Neustadt/Weinstrasse (Germany)
+49 (0) 63 21- 95 82 7 - 0
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO M2 WR at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO M2 WR in the language / languages: English as an attachment in your email.

The manual is 1,03 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of VDO M2 WR

VDO M2 WR User Manual - German - 26 pages

VDO M2 WR User Manual - Dutch - 26 pages

VDO M2 WR User Manual - French - 26 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info