165796
9
Zoom out
Zoom in
Previous page
1/18
Next page
10
* Depending on version
AUDIO ADJUSTMENT
ON/OFF
Switch the set on or off :
You can use the set even when the car ignition
is switched off. See 'INSTALLATION'.
VOLUME
Please make sure you can still hear the traffic
(horns, sirens........)
Adjust the volume :
SOUND
Select one of the pre-defined sound styles:
BASS-TRE : Your own settings of bass and
treble.
FLAT : Mid-positions of bass and treble
JAZZ: Jazz music
VOCAL : Speech
POP: Pop music
CLASSIC : Classic music
ROCK : Rock music
– These settings are memorised for each
source (Radio, Cassette/CD player* and CD
changer *).
SELECT
Select the desired audio mode :
BASS (low notes), TREBLE (high notes),
BALANCE (left-right), FADER (rear-front).
Adjust the selected audio mode.
After 5 seconds the display goes back to the
last mode of operation.
LOUDNESS
This option dynamically amplifies the high and
low notes so as to improve the sound output at
low volume levels. See INITIAL SETTINGS option
'LOUD'.
MUTE (Silence) :
Mute the set or cancel the mute :
The silent period may be interrupted by traffic
announcements (if TA/NEWS is switched on).
SOURCE
Select the desired source :
- Radio
- Cassette/CD player*
- CD Changer * (if connected)
- Phone in (if connected) and if option is
selected in Initial Settings and a call is active.
Useful tips
Set does not function. No Display.
Check fuse (set and car) and connections
Set functions but no sound?
Adjust the volume of the set.
Check fader and balance settings.
Check aerial and its connection.
Set mutes when you drive or display shows 'TEL
CALL', but no car telephone is connected to the
set.
See INITIAL SETTINGS; select Option 'TEL'
and set Choice to 'NO' .
Set mutes when you drive or display shows 'TEL
CALL', but the car telephone is not in used.
• See INITIAL SETTINGS; select Option
'PHONE' and set Choice to 'LO' or 'HI' according
to phone type.
Set mutes when you used the car telephone,
display shows 'TEL CALL', but you may still like
to listen to the radio.
To restore the same volume level
Display shows 'TOO HOT' and the sound from
the speakers is reduced.
A built-in safety circuit prevents the temperature
in the set from exceeding a certain level.
Wait until 'TOO HOT' disappears from the
display before increasing the volume.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton cr 2200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton cr 2200 in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info