7264

VDO Dayton CD 2203 Manual

10
Zoom out
Zoom in
Previous page
1/16
Next page
10
* Depending on version
SOURCE
• Press to select the desired source :
- TUNER
- CD/MP3*
- CD CHANGER* (if connected) or AUX IN*
- HFREE (if connected) and if option is selected
in 'SAM' and a call is active.
RADIO
WAVEBAND
• Press to select the desired waveband:
Note : You can suppress MW/LW (AM) bands if
not required. See 'SAM' (page 14), Option 'MW/
LW (AM)'.
AUTOMATIC SEARCH
Use search tuning to automatically search for a
station.
• Press
to tune to a station of a lower frequency
or
to a higher frequency.
–You will receive a station after a short time. To
search for another station, press the key again.
Note : You can select the search sensitivity for
FM. See 'SAM' (page 14), option 'LO/DX'.
Frequency scan / Preset scan (see 'SAM'
page 14 option 'F.SCAN')
Frequency scan allows you to listen to each located
station on the current waveband while Preset scan
allows you to listen to each stored preset station
on the current waveband.
• Press for more than 2 seconds to
activate/deactivate Frequency scan or Preset
scan.
• Press
or
to start the scanning.
Note : You can select how many seconds each
station is scanned, see 'SAM' (page 14); option
'SCANTIME'.
Manual tuning (if you know the frequency of
the required station)
• To switch to manual tuning :
See 'SAM' (page 14), option 'TUNING'; set value
to 'MANUTUNE'. The radio remains in manual
tuning mode until you change this setting back
to 'AUTOTUNE'.
• Press
to tune to a station of a lower frequency
or
to a higher frequency.
PRESELECTED STATIONS
Manually storing stations in a preset
You can manually store 18 FM stations, 12 MW
stations and 6 LW stations.
• Press
to select desired waveband.
• Tune in to the desired station.
• Press
or or for
more than 2 seconds to enter preset store
mode.
• To select preset number 1 or 2:
– Press
to toggle between preset 1
or preset 2.The display shows the selected
preset number e.g. Pr 01.
• To select preset number 3 or 4:
– Press
to toggle between preset
3 or preset 4.The display shows the selected
preset number e.g. Pr 03.
• To select preset number 5 or 6:
– Press
to toggle between preset 5
or preset 6.The display shows the selected
preset number e.g. Pr 05.
• Press
or or for
more than two seconds to store the station on
the selected preset number.
When storing an FM station, the relevant
RDS information and AF mode (on/off) are
also stored on the preset.
Recalling a preset
• Press
to toggle between Preset 1 or
Preset 2.
• Press
to toggle between Preset 3
or Preset 4.
• Press
to toggle between Preset 5 or
Preset 6.
Automatically storing stations (AUTO-STORE)
This function automatically stores 12 strongest FM
stations in the FMAST band or 6 strongest
MW(AM) stations in the MW(AM)AST band. When
you use Auto Store, the new stations replace any
stations previously stored in the FMAST band or
the MW(AM)AST band.
• Press
to activate autostore.
– The set gives a beep and then mutes.
– When it has finished, you hear a beep followed
by the station stored on preset 1.
– Sometimes it may not be possible to find 12
stations.
Switching the display mode (RDS station)
• Press
once or repeatedly to switch the
display between station name, Band and preset
number, frequency followed by PTY and sound
style.
004-16 Mid_Eng 8/17/02, 10:30 AM10
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton CD 2203 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton CD 2203 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Finnish as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info