165781
9
Zoom out
Zoom in
Previous page
1/19
Next page
9
* Depending on version
STORE A SPEED
Ensure in 'INITIAL SETTINGS' option 'SPD'
is set either to 'KM/H' or 'MPH'.
1. Drive at the desired speed.
2. To record the speed e.g. 80KM/H (50MPH) :
Display briefly shows '80 KM/H' and flag ' '
turn on.
When the recorded speed is exceeded, display
shows 'SPEED' follow by 'WARNING' and gives
warning beeps which become quicker the faster
you drive.
3 Warning ends, if the speed is reduced below
the recorded level,
or you can skip it :
Activate / Deactivate Speed Warning
Once a speed has been recorded it can be
activated or deactivated as often as you wish.
Activate / Deactivate speed warning e.g. to
warn when the car's speed exceeds the
registered speed.
If speed warning is activated, flag ' ' turn
on.
If speed warning is deactivated, flag ' '
turn off.
To change the recorded speed, see 'STORE A
SPEED'.
TEMPERATURE WARNING *
You can connect a temperature sensor to this set
to give you a visible and audible warning
automatically when the outside temperature
becomes lower than 3
o
C. See 'INSTALLATION'
then 'INITIAL SETTINGS' option 'TEMP'.
Activate / Deactivate temperature warning.
If temperature warning is activated, flag ' '
turn on.
If temperature warning is deactivated, flag
' ' turn off.
When the temperature falls below 3
o
C, you
briefly see 'WARNING' then the current
temperature displayed and hear 3 beeps. If the
temperature remains at this level you will hear
a beep every 5 minutes and see the current
temperature until it rises sufficiently and then
you will again hear 3 beeps and see the new
temperature.
A temperature sensor MUST be safely and
correctly mounted.
TEMPERATURE DISPLAY
With an external temperature sensor connected
and the temperature format selected in 'INITIAL
SETTINGS' option TEMP; you can check the
outside temperature by pressing the display key
as shown in 'DISPLAY OPTIONS'.
AUTOMATIC LEVELLER
This ensures that when you change between
different stations/wavebands or from radio to CD
playback, that the new volume is neither too loud
or too quite. See 'INITIAL SETTINGS' option 'AL'.
DEMONSTRATION MODE
In this mode, the display shows the main features
of the set.
SWITCHING ON DEMO MODE
While keeping the DISPLAY key pressed, switch
on the set. Release the DISPLAY key when you
see a change in the display. The set remains in
the demonstration mode, even if you switch the
set off and then on again.
SWITCHING OFF DEMO MODE
Switch off the set. Follow the same procedure as
'SWITCHING ON DEMO MODE'.
SPECIAL FUNCTIONS
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VDO Dayton cd 2201 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VDO Dayton cd 2201 in the language / languages: English as an attachment in your email.

The manual is 1,52 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info