577278
15
Zoom out
Zoom in
Previous page
1/46
Next page
More user manuals on ManualsBase.com
TROUBLESHOOTING
GUIDE
14
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Cleaner won’t run
Cleaner won’t pick up
or low suction
Dust escaping from
cleaner
Cleaner tools won’t
pick up
Headlight not working
Dirt container won’t
lock into place
Brushroll not rotating
1. Plug unit in firmly.
2. Check fuse or breaker in home.Replace fuse/reset breaker.
3. Take to service center or call 1- 877-VAX-USA-9 (1-877-829-8729).
4. Allow cleaner to cool - Pg.4.
1. Review dirt container removal & replacement - Pg.10 & 12.
2. Empty dirt container - Pg.10.
3. Turn on brushroll - Pg.7.
4. Remove HEPA filter and clean- Pg.10-12.
5. Remove dirt container and cleaning wand then check hose inlets for obstructions - Pg.10.
6. Review cleaning wand installation - Pg.6.
1. Empty dirt container - Pg.10.
2. Review dirt container removal & replacement - Pg.10 & 12.
3. Review cleaning wand installation - Pg.6.
4. Review filter removal & replacement - Pg.10.
1. Remove dirt container and cleaning wand then check hose inlets for obstructions - Pg.10.
2. Empty dirt container - Pg.10.
3. Clean filter - Pg.11 & 12.
4. Review dirt container removal & replacement - Pg.10 & 12.
1. Replace bulb - Pg.13.
2. Call 1- 877-VAX-USA-9 (1-877-829-8729) for nearest authorized VAX
®
Dealer.
1. Remove and realign lid - Pg.11.
2. Realign tab - Pg.12.
1. Unplug unit.Remove debris from brushroll.
2. Slide brushroll ON/OFFswitch to the ON position to activate brushes.
3. Press brushroll reset button - Pg.7.
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE
CUSTOMER SERVICE 1-877-VAX-USA-9 (1-877-829-8729)
In the event that further assistance is required,see your Yellow Pages for an authorized VAX
®
Dealer. Costs of any transportation to and from any place of repair are to be paid by the
owner. The service parts used in this unit are easily replaced and readily available from an authorized VAX
®
Dealer or retailer. Always identify your cleaner by the model number and
manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.)
1. Power cord not firmly plugged into outlet.
2. Blown fuse or tripped breaker.
3. Needs service.
4. Thermal Protector activated.
1. Dirt container not installed correctly.
2. Dirt container full.
3. Brushroll not on.
4. Dirty/clogged filter.
5. Dirt passage clogged.
6. Cleaning wand not installed correctly or misaligned.
1. Dirt container full.
2. Dirt container not installed correctly.
3. Cleaning wand not installed correctly or misaligned.
4. Filter not installed completely.
1. Dirt passage clogged.
2. Dirt container full.
3. Filter clogged.
4. Dirt container not installed correctly.
1. Bulb burnt out.
2. Loose electrical wires.
1. Dirt container lid not aligned properly.
2. Alignment tab not aligned.
1. Brushes clogged.
2. Brushroll switch in OFF position.
3. Brushroll needs to be reset.
WARNING: TO REDUCE THE RISK OF FIRE,ELECTRIC SHOCK,OR INJURY,UNPLUG CLEANER BEFORE SERVICING.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX X3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX X3 in the language / languages: English as an attachment in your email.

The manual is 1,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info