Manual VAX V-124A (page 4 of 20) (English)

540869

Zoom out

Zoom in

1/20

www.vax.co.uk

assembly

3. Assembly

Attach Upper Handle

Remove clean water tank (upper tank) from cleaner

(Fig.3/1).

NOTE: If the cord protector (A) on back of handle

should become dislodged during unpacking, make sure

it is repositioned properly before continuing with

assembly of your cleaner.

With the arrow (B) on the cord protector pointing down,

press groove (C) in the cord protector into slot in the lower

handle (Fig.3/2).

With cord hook to back of cleaner, push upper handle down

onto lower handle (Fig.3/3).

Push bolts into holes on front of handle. If bolts will not go

through hole easily, handle is not pushed completely down.

Place nuts in recessed areas on back of the handle. Hold

each nut in place while tightening each bolt securely (from

the front of the handle) with a Phillips screw driver

(Fig.3/4).

NOTE: Only two nuts are needed on this model. The

extra nut is not required but has been provided for

your convenience.

Replace clean water tank (upper tank) by positioning

bottom first. Press tank into place (Fig.3/5)

Attach Hose/Cord Hook

Insert tabs on hook into slots on back of cleaner. Snap

hook onto cleaner (Fig.3/6).

Fig.3/1

Fig.3/4

Fig.3/5

Fig.3/6

Fig.3/3

Fig.3/2

Vax V-124 User Guide v5.qxd 21/9/07 16:38 Page 4

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-124A in the language / languages: English as an attachment in your email.

The manual is 0,53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX V-124A Manual

Product: