541458
5
Zoom out
Zoom in
Previous page
1/8
Next page
5
operation / accessories
Window attachment - Push the window attachment
onto the rectangular steam nozzle until you hear it click
into place. You can fit the window attachment to the
concentration nozzle by pushing it into place.
Perfect for cleaning windows, mirrors, ceramic tiles and
surfaces and other non-porous, smooth surfaces.
Apply the steam evenly to the glass surface from a
distance of about 20cm. Switch the steam off and wipe
the moisture off the glass top to bottom in strips using
the rubber squeegee. Wipe the rubber squeegee and the
lower edge of the window dry after every strip.
WARNING: Glass surfaces can be shattered by the
sudden application of excessive heat. Before
cleaning such glass surfaces with the steam
cleaner. warm them up by applying steam to the surface
from a distance of 20-25cm. Continue by applying steam
from a distance of 10-15cm.
4. How to Operate
Over-heating protection
The steamer is equipped with protection against over-
heating. The cleaner will switch itself off automatically
on reaching a temperature of 180˚C, in order to prevent
over-heating. In this event, please remove the plug from
the socket immediately. Allow the cleaner to cool down
for 30 minutes before resuming work.
Filling the water tank
Always ensure that the plug of the steamer is removed
from the socket before filling or refilling the cleaner with
water. Remove the cover of the water tank by pressing it
down and turning it anti-clockwise. Fill the tank with 1.4L
of water using the measuring beaker. Replace the cover
and close it tightly by turning in the clockwise direction.
The water tank should be emptied after use. Allow the
inside of the water tank to dry out before replacing the
cover.
If the water tank needs to be refilled during use, first
switch the cleaner off and remove the plug from the
socket. Before opening the tank cover to refill the tank,
release the steam switch on the steam gun or allow the
cleaner to cool down completely.
WARNING: Even after a cooling period of 5
minutes, the remaining water in the tank and the
tank cover locking screw will still be hot. Always take care
when removing the tank cover locking screw, since hot
steam may be emitted and the thread can still cause
burns. The filler opening of the cleaner must never be
opened during use (CONTAINER UNDER PRESSURE).
WARNING: Never fill the tank with anything but
cold water. The use of any other fluids can be
dangerous, and can lead to damage of the heating
element.
Vax Careline: (UK) 0844 412 8455
(
ROI) 1-800 928 308
!
!
!
!
!
!
!
!
!
!
!
!
water
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX V-085 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-085 in the language / languages: English as an attachment in your email.

The manual is 0,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info