541441
6
Zoom out
Zoom in
Previous page
1/12
Next page
www.vax.co.uk
6
accessories / maintenance
5. Accessories
The accessories can be attached to the main body of the
steam cleaner by removing the floor head. Press the lock
button in to remove the floor head.
Fit the required accessory by aligning the hole in the side
of the accessory with the lock button on the main body of
the steam cleaner. Ensure that the lock button clicks firmly
into place.
Squeegee: For cleaning glass and mirror panels. Use the
squeegee at a very low steam flow. Achieve this by
adjusting the steam regulator. A cloth can be used to wipe
the blade and remove excess water during usage. For small
window panels, remove the squeegee tool and spray the
steam directly onto the surface. Use the squeegee
separately to wipe away the moisture.
Spot Brush: For cleaning the grout between tiles or
stubborn marks and stains on hard surfaces. Use at
medium or high steam flow.
Utility Tool: For cleaning tiled surfaces, cabinets and
worktops in kitchens and bathrooms. Use on a low to
medium steam flow. Cover the utility tool with the
elasticised cloth (Fig5/1).
Deflector Nozzle: For cleaning sanitary ware such as
toilet bowls, taps or drain covers. Use this nozzle at
maximum steam flow. Point it directly at non-permanent
stains on carpets or upholstery whilst holding a clean cloth
near the stained area to capture any loosened dirt.
NOTE: When the steam cleaner is used for cleaning in
the o
v
erhead position, increase the steam flow to
maximum and allow approximately 30 seconds for the
steam to be generated in full. Now the flow can be
reduced to the level required for the particular
accessory being used. Shak
e the s
team cleaner gen
tly
to ensure that the weighted tubing inside the tank is
in the correct (immersed) position.
6. Maintenance
After Each Use
NOTE: When you have finished steam cleaning, ensure
that both the power switch and steam switch are
turned off and that the plug is removed from the
electrical outlet.
Empty any remaining water from the tank by unscrewing
the water tank cap and turning the steam cleaner upside
down. This should be done over a sink or outdoors.
Store the steam cleaner by using the hanging strap at the
top of the handle if needed.
Cleaning the Steam Generator
IMPORTANT: Only follow these instructions
when the steam cleaner is completely cooled
down. Also ensure that the plug is removed from the
electrical outlet.
Twist the steam nozzle, releasing it from its locked
position. Pull upwards; this will remove it completely from
the steam chamber (Fig6/1).
Insert the nozzle brush into the chamber (Fig6/2).
!
Fig.6/1
Fig.6/2
Fig.5/1
Vax V-083(Q) User Guide.qxd 25/1/07 11:11 Page 6
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX V-083 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-083 in the language / languages: English as an attachment in your email.

The manual is 2,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info