Manual VAX V-025 Rapide Classic (page 8 of 12) (English)

540874

Zoom out

Zoom in

1/12

operation

5. Maintenance

Belt or Brush Removal and Replacement

Crosshead screwdriver required

IMPORTANT: Plug must be removed from socket

outlet before cleaning or maintaining the appliance.

Remove the water tank, switch off and unplug the carpet

washer. Flip the cleaner on its side to expose the nozzle

base.

To remove the belt cover, use a crosshead screwdriver to

remove the two screws (Fig.5/1).

Hold the belt cover near the belt roll and lift out (Fig.5/2).

Hold the brushbar with one hand, using the other hand to

keep tension on the the belt while removing (Fig.5/3).

Lift brushbar while pulling it out (Fig.5/4).

Slide the belt off the the motor shaft and dispose.

When replacing the belt, first slide it onto the motor shaft.

Then slip the brushbar through the belt. Place the belt in

the area of the brush without bristles.

Slide the brushbar into the nozzle, ensuring that the

brushbar end caps are orientated correctly, see inset

picture.

Manually turn the brushbar to check that it is fitted

properly (Fig.5/5).

Replace the belt cover by inserting the end furthest from

the brush first. Then replace the front of the belt cover

before securing in place with the two screws.

Filter Maintenance

Remove dirty water tank lid (Fig.5/6).

vax.co.uk

Fig.5/1

Fig.5/4

Fig.5/2

Fig.5/3

Fig.5/5

Fig.5/6

V-025 Series User Guide v1.0_V-025 30/09/2011 12:46 Page 8

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX V-025 Rapide Classic in the language / languages: English as an attachment in your email.

The manual is 2,1 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX V-025 Rapide Classic Manual

Product: