702168
16
Zoom out
Zoom in
Previous page
1/20
Next page
Check the ‘This pack contains’ panel on the box to make sure the part
is included with your vacuum cleaner.
The plug may not be fully pushed into the electrical socket.
Check the fuse in the plug if this needs replacing, always replace with a 13amp
British fuse.
The motor thermostat may have tripped. If this has happened, unplug the vacuum
cleaner. Remove and empty the dirt container and check the hose for blockages.
Clean the lters and allow the vacuum cleaner to cool for approximately 1 hour
(if you have washed the lters you will need to wait 24 hours for the lters to fully
dry before putting them back into the vacuum cleaner).
The brushbar may not have been activated. Go to ‘Using your machine - The full unit’.
The vacuum cleaner may not be reclined. Go to ‘Using your machine - The full unit’.
The lift out cylinder may not be correctly assembled to the back panel and oorhead.
Go to ‘Assembling your upright’.
The brushbar may be obstructed. Go to ‘Let’s talk technical’.
The brushbar may need resetting. Go to ‘Let’s talk technical’.
The belt may be broken. Go to ‘Let’s talk technical’.
The dirt container may not be tted correctly, remove the dirt container and
re-attach making sure it is clicked rmly into place.
The air vent is open on the oorhead, reducing the suction. Go to ‘Using your
machine - The full unit’.
The dirt container may be blocked, empty the dirt container and clean the lters.
Go to ‘Taking care of your machine’.
There may be a blockage in the hose. Check and clear any blockages. Go to ‘Let’s
talk technical’.
The brushbar may not be turning. Go to ‘Why isn’t my brushbar rotating?’ below.
If the accessory/tool will not pick up, check and clear any blockages. Go to ‘Let’s
talk technical’.
The lters may need cleaning or replacing. Go to ‘Taking care of your machine’.
SolutionProblem
What to do if it goes wrong
There is an
accessory missing
Why does my vacuum
cleaner have no power?
Why won’t the vacuum
cleaner pick up?
Why isn’t my
brushbar rotating?
If the brushbar has been obstructed, the brushbar motor protection sensor may
have been activated. The brushbar will stop and the light on the oorhead will
illuminate red. Check the brushbar and clear any hair or debris. Go to ‘Let’s talk
technical’.
Why is there a red light
on my oorhead?
The lters may not be correctly tted. Go to ‘Taking care of your machine’.
The dirt container may be full or blocked. Go to ‘Taking care of your machine’.
The lters may need cleaning or replacing. Go to ‘Taking care of your machine’.
There may be a blockage in the hose. Go to ‘Let’s talk technical’.
Why is dust escaping
from the vacuum?
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX UCSUSHV1 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX UCSUSHV1 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info