SUCKING UP LARGE SPILLS
If your washing machine floods or the deep freeze has been
defrosted, leaving pools of water about, your VAX can help.
1 Set up for washing, but don’t put water or cleaning
solution in the clean water bucket
If the spill is soapy, VAX Defoamer will be required in the dirty
bucket. VAX Defoamer is available from your VAXService Agent.
2 Use the extension tubes or connect the
washing tool to the hand grip via the extension
tube adaptor
3 Turn the suction power to maximum and switch on
4 Suck up the spill
The ‘sound’ your VAX makes will change and the
suction will drop when the dirty water bucket is full.
Time to empty it!
UNBLOCKING SINKS
1 Set up for washing, but without water or cleaning
solution (as described above)
2 Use the extension tube adaptor on the hand grip.
Wrap a cloth around the tube to create a seal
around the plug hole
3 Turn the suction power to maximum and switch on
The ‘sound’ your VAX makes will change and the suction will drop
when the dirty water bucket is full.
Time to empty it!
SUCKING UP SMALL SPILLS (Spill pick up not supplied with model 5110)
1 Set up for vacuuming
2 Fit the spill pick up tool to the vacuuming hose
3 Turn on your VAX and suck up the spill, keeping
the tool pointing downwards (as shown).
Turn your VAX off
The spill is held inside the tool
4 Remove the tool from the hose while it is still
pointing downwards
5 Pull the top off the spill container by pressing on the
square button (while the tool is still pointing down)
6 Pour away the spill
7 Rinse out the tool and all 3 parts of the top cap
8
How to: Suck up spills
Unblock sinks