Manual VAX Power 4 (page 7 of 12) (English)

540861

Zoom out

Zoom in

1/12

clearing blockages / troubleshooting

8. Clearing Blockages

WARNING: To reduce the risk of injury from

moving parts, unplug before servicing.

Clearing Blockages from the TurboTool

(Some models only)

1. Turn the TurboTool over and slide off the locking ring

(Fig.8/1).

2. Detach lower housing and remove blockage (Fig.8/2).

3. To re-assemble the TurboTool, ensure that the tabs are

engaged and pivot the lower housing closed. Slip the

locking ring over the neck of the TurboTool and into the

groove to finish (Fig.8/3).

9. Troubleshooting

WARNING: To reduce the risk of personal injury,

unplug the vacuum cleaner before performing

maintenance or troubleshooting checks.

PROBLEM: Vacuum cleaner won't run

Cause: Not properly plugged into electrical outlet.

Solution: Plug in firmly.

Cause: Blown fuse/tripped breaker.

Solution: Reset circuit breaker or replace fuse.

Cause: Thermal cut out.

Solution: Refer to page 3 for information.

PROBLEM: Cleaner won’t pick up/loss of suction.

Cause: Lower hose not connected properly.

Solution: Refer to page 4 for fitting information.

Cause: Dirt container not installed correctly, or full.

Solution: Empty dirt container and re-attach.

Cause: Broken or worn belt.

Solution: Replace the belt.

Cause: Clogged filters.

Solution: Remove, clean and replace filters.

Cause: Nozzle/hose or hose inlet is clogged.

Solution: Remove nozzle/hose and obstruction.

PROBLEM: Dust escaping from the vacuum cleaner.

Cause: Dirt container full.

Solution: Empty dirt container.

Cause: Dirt container not installed correctly.

Solution: Re-attach dirt container replacement

Cause: Hose not installed properly.

Solution: Review vacuum cleaner assembly.

LOCKING RING

Fig.8/1

Fig.8/2

TABS

Fig.8/3

Vax Careline: (UK) 0844 412 8455 (ROI) 1-800 928 308

Vax U90-P4 Series User Guide v1.4.qxd:UG 5/7/11 11:48 Page 7

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX Power 4 in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX Power 4 Manual

Product: