Manual VAX Power 3 (page 6 of 12) (English)

540866

Zoom out

Zoom in

1/12

vax.co.uk

dirt container & filter / belt & brush replacement

6. Dirt Container & Filter:

Removal and Replacement

1. Make sure the vacuum cleaner has been switched off

and unplugged from the mains supply. To remove the dirt

container from the vacuum cleaner press the release catch

and pull it forward.

To remove the lid of the dirt container hold the top and the

side handles firmly and turn the lid anti-clockwise. Pull the

lid away from the body of the dirt container.

Empty the all the dust and dirt from the dirt container

(Fig.6/1).

2. The filter inside the dirt container should be replaced

every 12 months. It should be cleaned each time the dirt

container is emptied. Remove it by grasping the ring at the

top of the filter.

Twist and pull the filter out. To clean it, tap it gently

against the side of a dustbin. Do not use a brush to clean

it as this may damage the filter.

Replace the filter into the dirt container. Push it firmly into

place to prevent dust and dirt leaking out. Replace the

canister lid turning clockwise and return the dust (Fig.6/2).

7. Belt and Brush:

Removal and Replacement

1. Unplug the vacuum cleaner from the mains supply.

Press the handle release button and turn the vacuum

cleaner over so that the base lies flat and face up. Use a

screwdriver to remove the three retaining screws shown

below. Remove the nozzle guard. (Fig.7/1).

Lift and remove the brushbar, then slide the belt off the

motor shaft and dispose of it. Place a new belt on the

motor shaft and then slip the brushbar through the belt

(Fig.7/2..

The belt should sit on the section of the brushbar without

bristles.. Re-fit the brushbar. Ensure the end caps are in the

correct position. Rotate the brushbar to check the belt is

not twisted. Replace the nozzle guard.

Fig.7/1

Fig.6/1

Fig.6/2

Fig.7/2

Vax U91-P3 & 4 Series User Guide.qxd:UG 2/4/09 18:06 Page 6

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX Power 3 in the language / languages: English as an attachment in your email.

The manual is 0,47 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX Power 3 Manual

Product: