540969

VAX Force 2 - V118 Manual

4
Zoom out
Zoom in
Previous page
1/12
Next page
www.vax.co.uk
4
assembly / operation
3. How to Assemble
IMPORTANT: Always unplug the vacuum cleaner
from the electrical outlet before assembling or
removing the accessories.
1. Insert the flexible hose into the inlet on the main body
of the vacuum cleaner. Push in until it clicks into
position (Fig.3/1).
2. Push the telescopic extension tube on to the end of
the handle (Fig.3/2).
3. The telescopic extension tube can be lengthened or
shortened by pushing the button in and sliding the
tube apart or together as required (Fig.3/3).
4.
Fit the combination floor head
(Model: V-118 only) or
T
urboBrush or Hard Floor tool head
(Model: V-118CP
only)
by pushing on
to the extension tube (Fig.3/4).
4. How to Operate
Cord Release
Fully unwind the power cord. A yellow mark on the power
cord indicates the recommended cord length. Do not
exceed the cord length beyond the red mark.
On/Off Button
Insert the power plug into the electrical outlet. Ensure the
vacuum cleaner is switched off.
Press the on/off button located on the top of the vacuum
cleaner and press the button again to turn the vacuum
cleaner off.
Carpet Cleaning
Model V-118 only:
For carpet and rug cleaning press the
rocker switch on the combination floor head to raise the
brushes.
Model V-118CP only: Attach the TurboBrush floor head
to the end of the extension tube. For large carpeted areas
only. (NOTE: not recommended for hard floors)
Hard floor cleaning
Model V-118 only:
For hard floor cleaning, press the
rocker switch on the combination floor head to lower the
brushes.
Model V-118CP only: Attach the hard floor tool head to
the end of the extension tube. For parquet and laminate
coverings.
Cord Rewind
To rewind the power cord, press the cord rewind button,
located on the top of the vacuum cleaner, and guide the
power cord with one hand. This will prevent the cord from
whipping which could cause damage or injury.
Carry Handle
Use the carry handle located on the top of the machine to
move the vacuum cleaner from room to room.
Hose Storage
For convenience there is a slot located located on the rear
of the vacuum cleaner where the floor tool and hose can
be park
ed f
or carrying and s
t
or
age.
Power Indicator
Located on the top of the machine, a green light will
indicate that the machine is working correctly.
Block
ed Filter Indica
t
or
Located behind the carry handle on the unit, the indicator
light will illuminate red when the filter or dirt container has
become blocked. When this occurs, empty the dirt
container and check the filters.
Fig.3/1
Fig.3/2
Fig.3/3
Fig.3/4
!
Vax V-118(CP) User Guide.qxd 30/8/07 09:17 Page 4
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX Force 2 - V118 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX Force 2 - V118 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info