Manual VAX DryVax V100T (page 7 of 10) (English)

540975

Zoom out

Zoom in

1/10

Fig. 7/8

Fig. 7/9

Fig. 8/1

Dust Bag & Filters: Removal & Replacement/Clearing Blockages

Fig.7/4

Fig. 7/5

Fig. 7/6

2. The pre-motor filter is found on the underside of

the top cover. To release the filter turn the cover

anti-clockwise and lift away (Fig. 7/5).

3. The pre-motor filter is protected by a foam filter

sleeve. This can be washed using cold water,

leaving it to fully air dry before replacing (Fig. 7/6).

4. The HEPA pre-motor filter can be washed using

cold water. Ensure filter is completely dry before

replacing. (Fig. 7/7).

5. The pre-motor filter should be replaced every

9-12 months.

Post-motor Filter

1. Located at the rear of the vacuum cleaner is a

post-motor filter which can also be removed and

replaced.

2. Push in latches on both sides of the cover

to release to post-motor filter (Fig. 7/8).

3. Remove the post-motor filter (Fig. 7/9).

5. The post-motor filter should be replaced every

9-12 months.

4. The filter can be tapped against the side of a

bin to remove debris. It can then be washed

using cold water leaving it to fully air dry before

replacing (Fig. 7/10).

1. Switch the vacuum cleaner off and disconnect

the plug from the electrical outlet.

2. The flexible hose can be disconnected from the

vacuum cleaner by rotating anti-clockwise and

pulling away from the machine (Fig. 8/1). Remove

any blockages found then reconnect the hose

securely.

8. Clearing Blockages

Fig.7/7

Fig. 7/10

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of VAX DryVax V100T in the language / languages: English as an attachment in your email.

The manual is 2,07 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

VAX DryVax V100T Manual

Product: