541153

VAX Air 3 U88-AM Manual

9
Zoom out
Zoom in
Previous page
1/12
Next page
8vax.co.uk
Looking After Your Machine –
Removing Blockages
FAQs
Warning: To reduce the risk of personal injury, unplug the vacuum cleaner before performing maintenance/troubleshooting checks.
Is there an accessory missing?
• Check the ‘Getting Started’ page in this guide or the box that the machine came in to make sure that the part is denitely included in your unit.
• If it is missing, we’re here to help. Simply call us on 0844 412 8455
Why won’t the vacuum cleaner pick up?
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• The separator may be clogged, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• There may be a blockage in the hose, please check the hose and remove the blockage
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of this
user guide (p6)
• The dirt container may be incorrectly installed, please ensure the dirt container is locked in place
• The brushbar may not be turning, please refer to the ‘Looking After Your Machine – Removing Blockages’ page in this user guide (p7)
Why won’t the accessories pick up properly?
• The TurboTool may be blocked, please refer to the ‘Looking After Your Machine – Removing Blockages’ page in this user guide (p7)
• The accessory may be broken
What do I do if an accessory/the unit becomes damaged or broken?
• Please check if the damage is with the accessory or the unit. To do this, rstly remove the accessory from the unit and check if there is suction
from the hose. If there is suction from the hose this conrms that the damage is with the accessory.
Please visit ‘spares shop website’ – vax.co.uk/support
• If having done the above checks, checked the hose for blockages and cleaned the lters there is still no suction/limited suction from the hose,
please call our Vax Careline 0844 412 8455
Why is dust escaping from the vacuum?
• The lters may not be installed correctly, please refer to the ‘Looking After Your Machine – Filters’ page of the user guide (p6)
• The dirt container may be full or blocked, please refer to the ‘Looking After Your Machine – Emptying and cleaning dirt container’ page of this
user guide (p6)
• The lters may need cleaning, please refer to the ‘Looking After Your Machine – Filters’ page of this user guide (p6)
• There may be a blockage in the hose, please check the hose and remove the blockage
Why does my vacuum cleaner have no power?
• It may not be plugged into the electrical socket correctly. Ensure that the plug is pushed into the electrical socket securely
• The electrical socket may not be working. Check the fuse or breaker and consult an electrician
• The motor thermostat may have tripped. Switch o and unplug the vacuum cleaner. Check the unit for blockages, clean the lters –please refer
to the ‘Looking After Your Machine – Filters’ page of this user guide (p6) and clean the separator (please refer to the ‘Looking After Your
Machine – Emptying and cleaning dirt container’ page of this user guide (p6). Leave the vacuum cleaner for 24 hours before switching the
vacuum cleaner back on
Why isn’t my brushbar rotating?
• The brushbar may not be turned on. Please refer to the ‘Getting Started’ page of this user guide (p4)
• The unit may not be reclined. Please refer to the ‘Getting Started’ page of this user guide (p4)
• The brushbar may be jammed. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide and
remove any blockages (p7)
• The brushbar may need re-setting. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide (p7)
Why is there a red light on my oorhead?
• The brushbar may be jammed. Please refer to the ‘Looking After Your Machine – Removing Blockages’ page of this user guide (p7)
• If the brushbar has been checked for blockages and the light still on, we’re here to help. Call us on 0844 412 8455
Why does the vacuum cleaner cut out?
• The motor is equipped with a thermal cut-out. If for any reason the unit should overheat, the thermostat will automatically turn the unit o.
Should this occur, unplug the vacuum cleaner from the electrical socket and turn o the switch. Remove and empty the dirt container. Check
the hose for blockages. Clean the lters. Allow the unit to cool for approximately 1 hour (if you have cleaned the lters you will need to wait
24 hours for the lters to dry before putting them back in the machine)
What do I do if the unit becomes damaged or broken?
• We’re here to help. Simply call 0844 412 8455 or visit vax.co.uk
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for VAX Air 3 U88-AM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of VAX Air 3 U88-AM in the language / languages: English as an attachment in your email.

The manual is 4,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info