529257
247
Zoom out
Zoom in
Previous page
1/250
Next page
MERIVA
©Copyright by Vauxhall Motors Ltd., England.
Reproduction or translation, in whole or in parts, is not
permitted without prior written consent from Vauxhall Motors
Ltd.
All rights as understood under the copyright laws are explicitly
reserved by Vauxhall Motors Ltd.
All information, illustrations and specifications contained in this
manual are based on the latest production information
available at the time of publication.
The right is reserved to make changes at any time without
notice.
Edition: January 2007.
TS 1578-B-07
MERIVA
Operation, Safety and Maintenance
Owners Manual
VAUXHALL Meriva
Operation, Safety, Maintenance
Data specific to your vehicle
Please enter your vehicle ’s data here to keep it ea sily accessible.
This information is available under the section "Technical data" as well as on the identification plate and in the Service Booklet.
Fuel
Designati on
Engine oil
Grade
Viscosity
Tyre pressure
Tyre size wi th up to 3 persons wi th full load
Summer tyres Front Rear Front Rear
Winter tyres Front Rear Front Rear
Weights
Permissible Gross Vehicle Weight
– EC kerbweight
=Loading
Your Meriva
is an intelligent combination of forward-
looking technology, impressive safety,
environmental friendliness and economy.
It now lies with you to drive your vehicle
safely and ensure that it performs
perfectly. This Owner’s Manual provides
you with all the necessary information to
that end.
Make sure your pa ssengers are aware
of the possible risk of accident and injury
which may result from improper use of the
vehic le.
You must always comply with the specific
laws of the country that you are travelling
through. These laws may differ from the
information in this Owner’s Manual.
When this Manual refers to a workshop
visit, we recommend your Vauxhall
Authorised Repairer.
All Vauxhall Authorised Repairers provide
first-class service at reasonable prices.
You will receive quick, reliable and
individual service.
Experienced mechanics, trained by
Vauxhall, work according to specific
Vauxhall instructions.
The Owner’s Ma nual should alwa ys be kept
in the vehicle: Ready to hand in the glove
compartment.
Make use of the Owners Manual:
z The "In Brief" section will give you an
initial overview.
z The table of contents at the beginning
of the owner’s manual and within the
individual chapters will show you where
everything is.
z Its index will help you find what you
want.
z It w ill familiarise you with the
sophisticated technology.
z It w ill increase your pleasure in your
vehicle.
z It will help you to handle your vehicle
expertly.
The Owner’s Manual is designed to be
clearly laid-out and easily understood.
This symbol signifies:
6 Continue reading on next page.
3 Items marked with an asterisk are not
fitted to all vehicles (model variants,
engine options, models specific to one
country, optional equipment, Genuine
Vauxhall Parts and Accessories).
Yellow arrows in the illustrations serve as
points of reference or indicate some action
to be performed.
Black arrows in the illustrations indicate
a reaction or a second action to be
performed.
Directional data, e.g. left or right, or front
or back, in the descriptions always relate to
the direction of travel.
We wish you many hours of pleasurable
driving
Your Vauxhall Team
9 Warning
Text marked 9 Warning provides
information on risk of accident or injury.
Disregard of the instructions may lead to
injuries or endanger life.
Inform your passengers accordingly.
Contents
Commitment to customer
satisfaction:
Our ai m: to keep you happy with your
vehicle. All Vauxhall Authorised Repairers
offer first-class service at competitive
prices. Experienced, factory-trained
technicians w ork according to factory
instructions. Your Authorised Repairer can
supply you with GEN UINE VAU XHALL-
APPROVED PARTS, which have undergone
stringent quality and precision checks, and
of course useful and attractive
VAUXHALL-APPROVED ACCESSORIES.
Our name is your guarantee!
For d etails of the
Va uxhall Authorised Rep airer Netw ork,
please ring this number; 0845 090 2044
In Brief ............................. ........................... 2
Keys, Doors, Windows ............. ............... 26
Seats, Interior ............................... ........... 43
Instrum ents, Controls ..... ........................ 84
Lighting ..... ............. ............................... 105
Infotainment S ystem ........................ .... 114
Clim ate Control ......... ......... .................. 117
Driving and Operation ... ...................... 132
Self-help, Vehicle Care ....... .................. 170
Technical Data .......... ........................... 206
Service, Maintenance ..... ...................... 224
Index ....................... ............................... 238
2In Brief
In Brief
Picture no: 15335T.tif
To unlock and open the doors:
Press button q and lift door
handle
All doors and the luggage compartment
are unlocked.
Country-specific version 3:
Pressing once unlocks the driver’s door,
and pressing twice unlocks the entire
vehicle.
6 Door locks – see page 26,
keys see page 26,
electronic immobiliser – see page 27,
radio frequency remote control
see page 28,
central locking – see page 30,
Vauxhall alarm system 3 see page 34.
Picture no: 17873s.tif
To unlock and open the luggage
compartment:
Press button q on remote control
and operate button beneath
handle
6 Radio frequency remote control
see page 28,
central loc king – see page 30,
Vauxhall alarm system 3 see page 34.
3In Brief
Picture no: 13977s.tif
To adjust front seats:
Pull handle,
slide seat,
release handle
6 Seatssee page 43,
seat p osition see page 44.
Picture no: 13978s.tif
Adjust front seat backrests:
Turn handwheel
Move backrest to suit seating position.
Do not lean on seat backrest while
adjusting it.
6 Seats see page 43,
seat position see page 44.
Picture no: 13979s.tif
To adjust fron t seat height:
Pull front lever at side
Lift lever and relieve some weight from seat
to raise it or press down on seat cushion
with body weight to lower it.
6 Seats see page 43,
seat position – see page 44.
9 Wa rning
Important: Do not sit nearer than
10 inches (25 cm ) from the stee ring
wheel, to permit safe airbag deployment.
4In Brief
Picture no: 13980s.tif
To adjust head restraint height of
front and rear outboard seats:
Ti lt head res tra in t forward to
release,
hold and adjust h eigh t,
engage
6 H ead restraintssee page 45,
rear centre head restraint – see page 45,
head restraint position – see page 46,
head restraint removal – see page 46.
Picture no: 13982.tif
To fit seat belt:
Draw seat belt smooth ly from
inertia reel, guide over shoulder
and engage in buckle
The seat belt must not be twisted at any
point. The lap belt must lie snugly against
the body . The front seat backrests must not
be tilted back too far (recommended
maximum tilting ang le approx. 25°).
To release belt, press red button on belt
buckle.
6 Three-point seat beltssee page 58,
airbag system – see page 67,
seat position see page 44.
Picture no: 13985s.tif
To adjust exterior mirrors:
From inside,
swivel lever in required direction
6 Mirrors – see page 37,
further information, aspherical exterior
mirror 3 see page 37.
5In Brief
Picture no: 16099s.tif
To adjust electrically adjustable
exterior mirrors 3:
Four-way switch in driver’s door
Toggle rocker switch to left or right:
Four-way switch moves appropriate mirror.
6 M irrors – see page 37,
fold-in exterior mirrors – see page 37,
further information, aspherical exterior
mirror, heated exterior m irrors 3
see pages 12, 37, 119.
Picture no: 14300s.tif
Adjusting interior mirror:
Swivel mirror housing
Swivel lever on underside of mirror housing
to reduce dazzle at night.
6 Interior mirror – see page 38,
automatic anti-dazzle interior mirror 3
see page 38.
6In Brief
7In Brief
Page
1 Side air v ents ............ ...................... 118
2 Front pa ssenger’s airbag . .............. 67
3 Infotainment system 3 . ................ 114
4 Haza rd warning lights ............ 10, 107
LED for
Vauxhall alarm system 3 ................34
Heated seats 3 .... ............. ............ 119
5 Central information display
for time, date,
outside temperature,
Infotainment system 3 . .................. 92
6 Centre air v ents ............. ........ ......... 118
7 Turn signal light, headlight flash,
dipped beam, hig h beam ............... 10
Door-to-door lighting function ..... 110
Cruise control 3 .............................. 151
8 Horn ...................... ............................ 11
9 Instruments .................... ........ .......... 84
Pa ge
10 Windscreen wiper,
windscreen wash system,
headlight wash system 3 and
rear window wash system 3 ... 11, 103
11 Pa rk ing lights, dipped beam ........ 105
Courtesy light ............................ ..... 111
Instrument illumination ........ ......... 111
Fog tail lig ht .... ............. .................. 107
Front fog lights 3 ............. .............. 106
Head lig ht range adjustment ......... 107
12 Bonnet release lever ........ ............. 170
13 Remote control on steering
wheel ............................. ............. .... 114
14 Starter switch
with steering column lock ................. 9
15 Steering whee l adjustm ent 3 ... ........ 9
16 Ac celera tor pedal ................. 138, 139
17 Brake peda l ..... ............. ......... 138, 154
Page
18 Clutch pedal 3 ............ .............. .... 138
19 Ashtray ............................. ............... 80
Accessory socket and
cigarette lighter ...... ............. ........... 79
20 Air conditioning system 3 ........ .... 117
Heated rear w indow ............ .... 12, 119
Air recirculation system 3.... ......... 123
21 Clim ate c ontrol .. ........................... 117
22 Glove compartment ... .................... 81
23 Fusebox .......... ............. .................. 188
8In Brief
Control indicators
X
S ea t belt w arning dev ice 3,
see pa ge 84.
B
A daptive Forward
Lighting (AFL) 3,
see pa ges 84, 109.
>
Front fog lights 3,
see pa ges 85, 106.
A
Engine electronics,
transmission electronics,
immobiliser,
diesel fuel filter 3,
Easytronic3,
fault,
see pa ges 85, 27, 147.
Z
Exhaust emission 3,
see pa ges 85, 147.
v
A irbag system s 3,
belt tensioners,
see pa ges 60, 72.
I
Engine oil pressure,
see page 86.
O
Turn signal l ights,
see pages 10, 86.
C
Headlight main beam,
see pages 9, 86.
!
Preheating system for
diesel engines 3 ,
diesel part icle filter 3 ,
see page 88.
j
Easytronic 3,
start engi ne 3 ,
see page 133.
T
Easytronic 3,
wint er program me,
see page 135.
m
Cruise control 3,
see page 151.
r
Fog tail light,
see pages 87, 107.
p
Alternat or,
see page 87.
R
Brake system,
clutch system 3,
see page 87.
u
Anti-lock Brake System (ABS),
see page 156.
S
Engine oil l evel 3,
see page 88.
EPS
Electric Power Steering (EPS) 3,
see page 88.
v
Electronic Stab ility Program me
(E SP ®
Pl us
) 3,
see page 149.
Y
Fuel level,
see pages 88, 143.
y
Seat occup ancy recog nition 3,
see pages 73, 74.
9In Brief
Picture no: 15678t.tif
Steering column lock and ignition:
Turn key to position 1;
Move steerin g wh eel s lightly
to release lock
Positions:
6 Starting see page 14,
electronic immobiliser – see page 27,
parking the vehiclesee page 15.
Picture no: 13981s.tif
Steering wheel adjustment 3:
Sw iv el lever down,
adjust height,
swivel lever up,
engage
Ad just stee ring wheel only when ve hicle is
stationary and steering column lock is
re lea se d.
6 Airbag system see page 67.
Picture no: 14727s.tif
Turn ligh t switch:
Press button:
6 Lighting – see p age 105,
headlight warning devic e see page 103.
0= Ignitionoff
1 = Steering free , ignition off
2= Ignition on,
for diesel engines: preheating
3= Starting
7
=Off
8
= Parking lights
9
= Dipped beam
or main beam
>
= Front fog lights 3
r
= Fog tail light
0
= Courtesy light
10 In Brief
Picture no: 18475s.tif
Headlight flash, m ain beam and
dipped bea m:
Main beam, headlight flash see
page 106.
Picture no: 14054h.tif
Switch on turn signal lights:
6 Turn signal lights – see page 106.
Picture no: 14303s.tif
Hazard warning lights:
6 Hazard warning lights – see page 107.
Headlight
flash
=Pull stalk
towards
steering wheel
Main beam = Push stalk
fo rwa rds
Dipped beam = Push stalk
forwards again
Right = Stalk up
Left = S talk dow n
On = Press ¨
Off = Press ¨ again
11In Brief
Picture no: 13991s.tif
Horn operation:
Press j
6 Airbag sy ste m 3 – see page 67,
remote control on steering wheel 3
see page 114.
Picture no: 14055h.tif
Windscreen wiper:
Stalk up
6 Windscreen wipersee page 103,
adjustable timed interval wipe 3
see page 103,
further information see pages 204, 233.
Picture no: 14056h.tif
Operating windscreen and
headlight wash systems 3:
Pull stalk towards steering wheel
The wiper w ill swipe for a few strokes.
The headlight wash system 3 can be
ope rated w hen the lights are on.
6 Windscreen wash system
see page 104,
further information see pages 204, 234.
§
=Off
$
= Adjustable timed interval
wipe
%
=Slow
&
=Fast
12 In Brief
Picture no: 14057h.tif
Activate rear window wiper and
wash system:
6 R ear window w ash / wipe system
see page 104,
further informationsee pages 204, 235.
Picture no: 13992s.tif
Heated rear window,
heated exterior mirrors 3:
6 Air conditioning – see page 117,
heated rear window see page 119.
Picture no: 13993s.tif
To defrost misty or icy windows:
Turn rotary knob for temperature
and airflow clockwise,
air distribution to V;
Air conditioning system 3:
Press button n;
Electronic Climate Control
system 3:
Press button V
6 Climate control – see page 117,
air conditioning system 3 – see page 123,
Electronic Climate Control system 3
see page 126.
Wiper on = Push stalk
forwa rd s
Wiper off = Pull stalk
towards
steering wheel
Washer = Push stalk fully
forwa rd s an d
hold
On = Press Ü
Off = Press Ü again
13In Brief
Picture no: 16496s.tif
To set automatic mode of
Electronic Climate Control
system 3 :
Press AUTO button,
set temperature using
left-hand rotary knob
6 E lectronic C lim ate C ontrol system 3
see page 126.
Picture no: 15270s.tif
Manual transmission:
Reverse gear: with vehicle stationary,
three seconds after declutching pull the
ring up and engage gear.
If the gear d oes not engage, set the lev er in
neutral, release the clutch pedal and
depress again; then repeat gear selection.
Picture no: 14175s.tif
Easytronic 3:
To move the selector lever from N to R,
press the button on the lever.
Only start in N with footbrake applied.
6 Easytronic 3 see page 132.
N = Idle / start position
o
=Drive position
(c entre position)
+ = Higher gear
-=Lower gear
A/M = Switch between
Automatic mode and
Manual mode
R=Reverse gear
(with selector lever lock)
14 In Brief
Before starting-off, check:
z Tyre pressure and tyre condition,
see pages 160, 216.
z Engine oil level and fluid levels in engine
com partment, see pages 228 to 235.
z All windows, mirrors, exterior lighting
and num ber p la tes are free from dirt,
snow and ice and are operational.
z No objects are placed in front of the rear
wind ow, on the instrument panel or in
the area in which the airbags inflate.
z Seats, seat belts and mirrors are
correctly adjusted.
z Bra ke op eration.
Picture no: 15582a.tif
To start engine:
Operate clutch and brake,
Easytronic 3 in N,
do not accelerate,
Petrol engines: key to 3;
Diesel engines: key to 2,
when control indicator ! go es
out
1)
, turn key to 3;
release key once engine is
run ning
Before restarting or when switching off the
engine, turn key back to position 0.
To switch on the ignition, only turn the key
to position 2.
6 Electronic immobiliser – see page 27,
diesel fuel system – see page 170,
further information see pages 138, 171.
1)
Preheating system switches on only if outside
temperature is low.
15In Brief
Picture no: 14714s.tif
Releasing the handbrake:
Raise lever slightly,
press lock button,
lower lever fully
6 Handbrake – see page 155.
Picture no: 15758t.tif
Parking the vehicle:
Apply handbrake firmly,
switch engine off,
remove key,
lock steering wheel,
loc k ve hicle
To lock vehicle and arm the Vauxhall alarm
sy ste m 3, press button p .
To activate the mechanical anti-theft
lock ing sy ste m, p ress b utton p twice.
6 Further inform ation see pages 27, 138,
radio frequency remote control –
see page 28,
central loc king system – see page 30,
Vauxhall alarm system 3 see page 34,
vehicle decommissioning – see page 237.
16 In Brief
Advice when parking:
z Do not park the vehicle on flammable
surfaces as combustion could occur due
to the h igh ex ha us t temperature s.
z Always apply the handbrake firmly.
Ap ply the ha ndbrake as firmly as
possible on uphill or downhill slopes. To
reduce operating forces, apply
footbrake at the same tim e.
z Close windows, sliding roof 3 and tilting
roof 3 .
z With manual transmission, select first
gear or reverse gear. With Easytronic 3,
move selector lever to c entre position
before switching ignition off.
z On vehicles with Easytronic 3, control
indicator R flashes for a few seconds
after the ignition is switched off if the
handbrake has not been applied.
z Turn steering wheel until lock is felt to
engage (anti-theft protection) after first
withdrawing the ignition key.
z The engine cooling fans may run after
the engine has been switched off,
see page 227.
6 Further information
see pages 235, 237.
17In Brief
That was the most important
information for your first drive
in your Meriva in brief.
The other pages o f this chapter
contain a description of some
interesting functions in your
vehicle.
The rema in ing ch apters of the
Owners Manual contain
important information on
operation, safety and
maintenance as well as a
com plete index.
18 In Brief
Flexible Seat System (FlexSpace)
The rear row of seats in your vehicle offers
three seats or, with the centre seat lowered,
two seats with more seating space. The
outboard seats can be lowered to obtain a
level loading surface.
Picture no: 14178s.tif
Move rear outboard seats
z Pull handle under seat,
z Slide seat,
z Release handle and allow seat to
eng age in position.
The backrests must not be in the rearmost
position when the seats are moved back, in
order to prevent d amage.
Picture no: 14179s.tif
Adjust or fold backrest of outboard seats
z Pull handle on outboard side of seat,
z Guid e b ackrest into the relevant position,
z Release handle and allow seat to audibly
engage in position.
19In Brief
The backrest can engage in several
positions. In addition, the backrest can be
folded all the w ay down to the seat cushion
when extending the luggage
compartment.
Picture no: 14728s.tif
Low er c en tr e s eat
z House centre se at belt in the belt reta iner
in the roof,
z Insert seat belts into recesses in seat
cushion,
z Slide centre rear seat head restraint all
the way down,
z Pull release handle at rear of centre seat
backrest. Tilt backrest forwards and
eng age.
Picture no: 14729s.tif
Two r ear seat s w ith more seating sp ace
z Lower centre seat,
z Adjust backrest to centre position,
z Pull handle beneath seat.
z Slide seat all the way back, then towards
the centre of the vehicle and then further
rearwards to the desired position,
z Release handle and allow seat to
engage in position.
9 Wa rning
To prevent injuries, a lways hold seat
backrest firmly and guide downwards
when folding.
20 In Brief
Picture no: 14730s.tif
Three seats
z Adjust backrest to centre position,
z Pull handle beneath seat.
z Slide seat all the way forwards, then out
towards the door and then further
forwards to the desired position.
z Release handle and allow seat to
engage in position,
z Raise centre seat.
Picture no: 14716s.tif
Fold ing down out board seats
z Pull seat belt from belt guide on
backrest,
z F o ld d o w n o u tb oa rd r e a r s e a t b a c k r e s t s ,
z To achieve a level loading surfa ce, pull
release handle on back of backrest and
push seat down until it latches into
position.
Picture no: 14125s.tif
Airbag system
The airbag system consists of several
separate systems.
Front airb ag system
The front airbag system will be triggered in
the event of a serious accident involving a
frontal impact and forms safety cushions
for the driv er and front passenger. The
forward movement of the driver and front
passenger is checked and the risk of
injuries to the upper body and head are
thereby substantially reduced.
21In Brief
Picture no: 14742s.tif
Sid e airbag system 3
The side airb ag is trigg ered in the event of
a side-on collision to form a safety cushion
for the driver or front passenger in the
respective door area. This substantially
reduces the risk of injury to the upper body
and pelvis.
Picture no: 14127s.tif
Curtain airbag system 3
The curtain airbag system triggers in case
of a side-on collision and provides a safety
barrier in the head a rea on the respective
side of the v ehicle. This reduces the risk of
injury to the head considerably in case of a
side-on collision.
6 Airbag systems see page 67.
Picture no: 14287j.tif
Active head restraints 3 on front
seats
In the event of a rear-end impact, the
active head restraints automatically tilt
forward a little. The head is more
effectively supported b y the head restraint
and the danger of injuries caused by
whiplash in the neck area is reduced.
Active head restraints are identified by the
lettering ACTIVE on the head restraint
guide sleeves.
22 In Brief
Picture no: 14304s.tif
Travel Assistant 3
The Travel Assistant contains:
z Arm rest,
z Tray ,
z Drink holders.
The Travel Assistant is mounted on the
lowered centre seat (see page 19).
Picture no: 14315s.tif
Dismantling the Tr avel Assistant
z Press lower button on the Travel
Assistant,
z Pull Travel Assistant upwards out of
recesses,
z There is a carrying handle on the b ack to
facilitate transport.
Picture no: 15593t.tif
Operating menus in the
information display 3
Menu options are selected using menus
and using the buttons / four-way button or
the multi-function knob of the Infotainment
system 3 or the buttons 3 on the steering
wheel. The respective menu options are
s how n on th e display.
Selection using four-way button:
press four-way button at top, bottom , left
or right.
23In Brief
Picture no: 15559t.tif
Selection using multi-function knob 3:
Rotate and press multi-function knob.
To exit a menu, turn the multi-function
knob left or right to Ret urn or Main and
select.
Picture no: 14034s.tif
To select with steering wheel buttons:
Select menu options via the menus and the
buttons.
6 Information display see p age 92.
Picture no: 16719t.tif
Trip computer 3
The trip computers provide information on
driving data, which is continually recorded
and evaluated electronically.
Functions:
z Range,
z Instantaneous consumption,
z Distance travelled,
z Average speed,
z Effective consumption,
z Average consumption,
z Stop watch.
6 Trip computer – see page 99.
Ü Board Computer 19,5° 19:36
BC 1 All values
BC 2
257.0 miles
Timer
Ø40mph
7.0 ga l s
Ø 31.0 mpg
1
11
1
8
88
8
24 In Brief
Picture no: 14034s.tif
Remote control on steering
wheel 3
The functions of the Infotainment system
and the information display can be
operated with the buttons on the steering
wheel.
Further information is available in the
Infotainment system operating
instructions.
Picture no: 14035s.tif
Twin Audio 3
Tw in Audio provides rear seat occupants
with the opportunity to listen to a different
audio source than the one selected by the
driver on the Infotainment system.
Only an audio source that is not currently
active on the radio system can be
controlled using Twin Audio.
Tw o headphone connections are available,
with separate volume c ontrols.
Further inform ation is available in the
Infotainme nt sy ste m ope ra ting
instructions.
Picture no: 14779s.tif
Parking distance sensors 3
When rev erse gear is selected, the parking
dis tance se nsors switch on automatically .
If the vehicle approaches an obstacle when
reversing, a series of signals can be heard
in the vehicle interior. The interval between
the signals becomes shorter as the
distance is reduced. If the distance is less
than 30 cm, the signal will be continuous.
6 Parking distance sensors 3
see page 153.
25In Brief
Picture no: 15209j.tif
Adaptive Forward Lighting
(AFL) 3
AFL improves illumination of:
z Curves (curve lighting),
z Intersections and tight turns
(turn lighting).
Picture no:
Curve lig hting (1)
The light beam pivots based on steering
wheel position and speed (from ap prox. 6
mph (10 km/h)).
The headlights shine at an angle of up to
15° to the right or left of the direction of
travel.
Turn lig hting (2)
An additional light illuminates at certain
steering wheel settings (after rotation of
approx. 90°), turn signal settings and
speeds (up to approx. 25 m ph (40 km/h)).
The lig ht beam projects at a 90° angle to
the left or right of the vehicle up to a
distance of a pprox. 30 metres.
Reverse function
Turning the lights on, selecting reverse
gear selected and switching on a turn
signal light causes the turn lighting to be
switched on for the respective side.
When the turn signal is sw itc hed off, the
turn lighting continues to illuminate for
app rox . 1 5 second s.
6 Adaptive Forward Lighting (AFL) 3
see page 109.
26 Keys, Doors, Windows
Keys, Doors, Windows
Replacement keys
The key number is specified in the vehicle
docum ents and in the Car Pass 3.
The key is a constituent of the electronic
immobiliser. Ordering keys from a Vauxhall
Authorised Repairer g uarantees problem-
free operation of the electronic
immobiliser.
Keep the spare key in a safe place.
Locks, see page 204.
Lock cylinders
Designed to free-wheel if they are
forcefully rotated without the correct key or
if the correct key is not fully inserted.
To reset, turn cylinder with the correct key
until its slot is vertica l, remove key and then
re-insert it. If the cylinder still free-wheels,
turn the key through 180° and repeat
op eration.
Car Pass
The Car Pass contains all of the vehicles
data and should therefore not be k ept in
the vehicle.
Have your Car Pass to hand when
consu lting a Vauxhall A uthorised Re pairer.
Picture no: 15760t.tif
Key with retractable key blade 3
Press button to extend. Press button to
retrac t and audibly engage key blade.
Replacem ent keys ................. .............. 26
Loc k cylinders .......... ............................ 26
Ca r Pass.................... ............................ 26
Key with retractable key blade 3 ...... 26
Electronic immobiliser............ .............. 27
Radio frequency remote control ....... . 28
Central locking system ........................ 30
Fault when locking or unlocking... ...... 32
Luggage compartment ...................... . 32
Vauxhall alarm system 3.................... 34
Child safety locks .......... ...................... . 36
Exterior mirrors..... ............................... . 37
Interior mirror .. ............................... ...... 38
Door windows ...... ............................... . 39
Electric windows 3... ............................ 39
Sunroof and tilting roof 3 ......... ......... . 41
27Keys, Doors, Windows
Picture no: 15761t.tif
Electronic immobiliser
Using a transponder housed in the key, the
system checks whether the vehicle may be
s tarte d us i ng the key that has be en
inserted. If the k ey is re cognised as
"authorised" the engine can be started.
The electronic immobiliser activates
automatically when the key is removed
from the starter switch.
The c od e numbe r of the e lectronic
immobiliser is given in the Car Pass.
Picture no: 17880s.tif
Control i nd icator for imm obiliser A
Control indica tor A illuminates briefly
when the ig nition is sw itched on.
If the control indicator flashes when the
ignition is on, there is a fault in the system;
the engine cannot be started. Switch off
the ignition and then repeat the start
attempt.
If the control indicator A continues to
flash, try to start the engine using the spare
key and conta ct a workshop for assistance.
If control indicator A illum inates after the
engine is started, there is a fault in the
engine electronics or transmission
electronics 3, (see pages 85, 137, 147), or
there is water in the diesel fuel filter 3,
(see page 230).
Not e
The immobiliser does not lock the doors.
Therefore, always lock the vehicle before
leaving it unattended and enable Vauxhall
alarm system 3 . See page 34.
28 Keys, Doors, Windows
Radio frequency remote control
Depending on equipment level, the vehicle
comes equipped with one of the remote
controls illustrated on this page.
The radio frequency remote control is
integrated in the key.
Used to op erate:
z Central locking system ,
z Mechanical anti-theft locking system,
z Vauxhall alarm system 3.
In vehicles with electric windows in all
doors 3, the remote control can be used to
closed the windows.
Picture no: 15330t.tif
The remote control has a range of approx.
5 metres. This range can be affected by
outside influences. Aim the remote control
at the vehicle to op erate.
Handle the remote control with care,
protect it from m oisture and high
temperatures and avoid unnecessary
op eration.
The hazard warning lights flash to indicate
that the remote control is operational.
Picture no: 15331t.tif
C entra l locking system,
see page 30.
Mechanical anti-theft locking system,
see page 28.
Vauxhall alarm system 3,
see page 34.
Electric windows 3,
see page 39.
29Keys, Doors, Windows
Fault
If the central locking system cannot be
opera ted with the remote control, it may be
due to the following:
z The range of the remote control has
been exceeded.
z Remote control battery volta ge is too
low. Battery replacement - see next
column.
z If the remote control is frequently and
repeatedly operated outside the
reception range of the vehicle (e.g. too
far from vehicle), the remote control will
no longer be recognised. Remote control
synchronisation, see end column.
z If the central locking system is
overloaded as a result of repeated
op eration at short intervals. The power
supply is cut off for a brief period.
z Inte rference from higher-power radio
waves from other sources.
To eliminate the cause of a fault, we
recommend contacting a workshop for
assistance.
Open driver’s door with key, see pa ge 32.
Picture no: 15332t.tif
Remote control b attery replacement
Replace the battery as soon as the range
of the remote control becom es reduced.
Ke y with re trac ta ble k ey blade ,
see Fig. 15330 T on previous page.
Extend key, see page 26. Open remote
control. Replace battery - battery type, see
page 218 - noting installation position.
Close remote control.
Make sure that you dispose of old batteries
in accordance with environmental
protection regulations.
Key with fixed blade,
see Fig. 15331 T on previous page.
Have the workshop change the battery.
In the event of a functionality problem or
ba ttery r epl acement, synchroni se the
remot e control.
After changing the battery, unlock the
door using the key in the driver’s lock
cylinder, see page 32. The remote control is
synchronised by inserting the key in the
starter switch.
30 Keys, Doors, Windows
Picture no: 15335t.tif
Central locking system
For doors, luggag e compartment and tank
flap.
To unlock
Press button q on the remote control
or, from the inside –
pull up lock button on drivers door.
When the mechanical anti-theft locking
system is enabled, the doors cannot be
unlocked by pulling up the lock buttons.
Country-specific version 3:
Pressing once unlocks the driver’s door,
and pressing twice unlocks the entire
vehic le.
Picture no: 15333t.tif
To lo ck
Close doors, luggage compartment and
tank flap.
Press button p on the remote control
or, from the inside
press lock button on driver’s door when the
doors are closed.
Picture no: 15334t.tif
Mechanical anti-theft locking system
All the doors must be closed.
Press the p button on the remote control
within 10 seconds of locking.
Lock buttons on all doors are positioned
such that doors cannot be opened.
If the ignition was on, the driver’s door
must be opened and closed once so that
the vehicle can be secured.
9 Warning
Do not use the system if there are people
in the vehicle! The doors cannot be
unlocked from inside.
31Keys, Doors, Windows
Note
z To prevent the driver from being
inadvertently locked out, the button on
the drivers door cannot be depressed
when the door is open.
z If the driver’s door is not closed properly,
the central locking system will unlock
again immediately after locking.
z Approx. 30 seconds after unlocking
using the remote control, the doors lock
again automatically if no door is
op ened.
z To lock the doors from inside (e.g. to
prevent unwanted entry from outside),
press lock button on d riv ers door when
the doors are closed.
z Locked doors unlock automatically if an
accident of a certain severity occurs (to
permit outside assistance). Prerequisite:
Ignition must not be switched off.
Picture no: 17899s.tif
Closing windows 3 from outside
On vehicles with electric windows in all
doors 3, the windows can be closed from
outside:
Hold button p on the remote control
depressed until all of the windows have
closed completely.
Further information on electric windows,
see page 39.
Fault
If the central locking cannot be operated,
this can be for one of the following reasons:
z If the central locking system is
overloaded as a result of repeated
operation at short intervals. The power
supply is cut off for a brief period.
z Defective fuse in fusebox, see page 188.
To eliminate the cause of a fault, we
recommend contacting a workshop for
assistance.
Operate drivers door with key, see next
page.
9 Warning
Exercise care when operating e lectric
windows. Risk of injury, especially for
children.
Vehicle passeng ers must be informed
accordingly.
Keep a close watch on the windows when
closing them. Ensure that nothing
becomes trapped in them as they move.
32 Keys, Doors, Windows
Picture no: 17881s.tif
Fault when lo cking or u nloc ki ng
Fault in remote control
To unlock
Turn key clockwise in d river’s door lock,
return to the vertical position and remove.
The entire vehicle is unloc ked. Sw itc h on the
ignition to deactivate the Vauxhall alarm
system 3.
To lock
With the driver’s door closed, turn the key
anticlockwise in the lock, return to the
vertic al position and remove. The entire
vehicle is locked.
Malfuncti on i n cent ral locking syst em
To unlock
Turn key clockwise in driver’s door lock,
return to the vertical position and remove.
The driver’s door is unlocked. The other
doors can be unlocked by pulling up the
interior lock buttons (not possible if the
mechanical anti-theft locking system is
enabled). Switch on the ignition to
deactivate the Vauxhall alarm system 3.
To lock
With the driver’s door open, press the
interior lock button of the other doors.
Close the driver’s door. Turn the key
anticlockwise in the lock, return to the
vertical position and remove. The tank flap
cannot be locked if the re is a ma lfunction in
the central locking system.
Note
z The mechanical anti-theft locking
system and the Vauxhall alarm system 3
cannot be activated with the key.
z To deactivate the Vauxhall alarm
system 3 after ope ning a d oor, switch on
the ignition.
z To eliminate the cause of a fault, we
recom mend contacting a workshop for
assistance.
Picture no: 15335t.tif
Luggage com partment
To unlock
Press button q on the remote control. The
luggage compartment is unlocked
together with the doors and the tank flap.
Country-specific version 3:
Press button q twice on the remote
control; one press unlocks the drivers door,
two presses unlocks the entire vehicle.
33Keys, Doors, Windows
Picture no: 17873s.tif
To open
The luggage com partment is opened by
operating the unlocking button beneath
the handle.
Fitting of accessories on the tailgate will
increase its weight. If it becomes too heavy,
it will then not stay op en.
Picture no: 17882s.tif
To clo se
There are two handles on the inside of the
tailg ate for closing the luggage
compartment.
Do not operate the unlocking button
beneath the handle when closing.
Otherwise the luggage compartment will
once again b e unlocked.
Picture no: 15333t.tif
To lock
Press button p on remote control.
9 Wa rning
Do not drive with the luggage
com partment open or ajar, e.g. when
transporting bulky objects, since toxic
exhaust gas could penetrate the interior.
34 Keys, Doors, Windows
Vauxhall alarm system 3
Monitors:
z The doors, luggage compartment,
bonnet,
z The passenger compartment,
z Vehicle tilt, e.g. if it is raised,
z The ign ition .
Picture no: 15334t.tif
To activ ate
All doors, windows, sunroof 3, tilting roof 3
and the bonnet must be closed.
Press button p on the remote control to
activate the Vauxhall alarm system and
lock the doors.
If the ignition was switched on, the driver’s
door must be opened and closed once so
that the anti-theft alarm system can be
switched on.
Picture no: 11575s.tif
Act ivat ion without monitoring of
passenger compartment or vehicle tilt
E.g., if anim als a re to be left in the vehicle.
1. Close luggage compartm ent and
bonnet.
2. Press button in front of the courtesy light
(with ignition off); LED in the hazard
warning light button flashes for a
maximum of 10 seconds.
3. Close doors.
4. Switch on anti-theft alarm system. LED
illuminates. After approx. 10 second s,
the anti-theft alarm system is activated
without monitoring of the passenger
compartment or vehicle tilt. The LED
flashes until the system is switched off.
35Keys, Doors, Windows
Picture no: 14046s.tif
Light emit ting d iode (LE D)
During the first 10 seconds of anti-theft
alarm system activation:
After the first 10 seconds of anti-theft
alarm system activation:
If a system fault occurs, contact a
work shop for assistance.
Picture no: 15335t.tif
To deactivate
Press button q on remote control unit
– or
turn on ignition.
If there is a fault in the remote control,
unlock vehicle as described on page 32.
If the alarm is triggered when the drivers
door is opened, deactivate the anti-theft
alarm sy ste m by sw itc hing on the ignition.
z LE D come s on
= Test, switch-on delay,
z LE D flashe s
quickly
= Door, luggage
com partment or
bonnet open, or
system fault.
z LED flashes
slowly
=System switched on,
z LED illuminates
for approx.
1second
= Switch-off function.
36 Keys, Doors, Windows
Note
z Changes to the vehicle interior, such as
the use of seat covers, could impair the
function of passenger comp artm ent
monitoring.
Alarm
An alarm can be trigg ered when the
anti-theft alarm system is switched on,
indicated by:
z An acoustic signal (horn) and
z A visual signal (hazard warning lig hts).
The number of alarms and the duration
thereof are stipulated by law.
The a la rm can be silenced by pressing
button q on the remote control or by
switching on the ignition. The anti-theft
alarm system is deactivated at the same
time.
Alarm siren
with int eg rated ba ttery 3
The alarm siren monitors the on-board
voltage network and triggers an alarm if
this network is manipulated (e.g. if the
vehicle’s battery is disconnected by
unauthorise d persons). The alarm siren has
its own power supply and is therefore not
dependent on the vehicles battery.
If the vehicle’s battery is to be
disconnected (e.g. for maintenance work),
the alarm siren must be deactivated as
follows: switch the ignition on then off,
disconnect the vehicles battery within
15 seconds.
To sw itch off al arm siren:
Switch ignition on then off.
Picture no: 16102s.tif
Child safety locks
Turn rotary knob in each rear door lock
from v ertical position using the ignition key:
Door cannot be opened from the inside.
9 Warning
Use the child safety lock whenever
child ren are occupying the rear seats.
Disregard of these instructions may lead
to injuries or endanger life. Vehicle
pas seng ers must be informed
accordingly.
37Keys, Doors, Windows
Picture no: 13985s.tif
Exterior mirrors
Manual
From the inside, move the handle in the
appropriate direction.
Picture no: 16099s.tif
Ele ctri c 3
Four-way switch in drivers door.
Move rocker switch located above the
four-way switch to the left or right:
Four-way switch controls corresponding
mirror.
Aspherical ext eri or mirror 3
Increases the field of view. Estimating the
distance away from vehicles following you
is only possible to a limited extent because
of slight distortion.
Picture no: 15279s.tif
Sw ing-in exter ior mirror s
Manually: Press lightly.
Electrically: Press button. The mirrors
swing-in to their respective end positions.
If a mirror has been manually adjusted,
swing-in both mirrors by hand and then
press the button.
After electrical operation, there is a
6-second delay before the mirrors can
be operated again.
38 Keys, Doors, Windows
Picture no: 14138s.tif
For the safety of pedestrians, the exterior
mirrors will swing out of their normal
mounting position if they are bumped with
sufficient force. Reposition the mirror by
applying slight pressure to the mirror
housing.
Picture no: 14300s.tif
Interior mirror
To adjust, swivel mirror housing.
Swivel lever on underside of mirror housing
to reduce dazzle at night.
Picture no: 13984s.tif
Autom atic anti-da zzle interior mi rror 3
Dazzle at night is automatically reduced.
The mirror does not reduce dazzle when:
z The ignition is switched off,
z Reverse gear is engaged or the selector
lever is set to R,
z Interior lighting has been switched on.
39Keys, Doors, Windows
Picture no: 14137s.tif
Door windows
The door windows can be operated with
the cra nk.
Electric win dows 3
Operable when the ignition key is in
position 1 (see page 9).
Button illumination indicates operational
readiness.
Operational readiness ends when the
drivers door is opened.
Ope rated with two or four cross switches in
driver’s door armrest: top cross switches for
driver’s and front passenger’s d oor
windows, and bottom cross switches 3 for
the rear windows.
There are also cross switches in the front
passengers door arm rest and in the rear
door armrests 3.
Picture no: 14804s.tif
To operate window in stages, tap
appropriate switch.
For automatic opening or closing, keep
switch pressed for slightly longer.
To stop window movement, tap switch
again.
Safety function
If the window glas s encounte rs resistance
above the middle of the window d uring
automatic closing, it is immediately
stopped and the window opened again.
If the windows do not move easily (e.g. on
account of frost), repeatedly tap the switch
for the appropriate window until the
window has been closed in stages.
9 Warning
Take care when operating the electric
windows 3. Risk of injury, espec ia lly for
children. Inform vehicle occupants.
If there are children occupying the rear
seats, switch on child safety system for
rear windows 3, see next page.
Keep a close watch on the windows when
closing them. Ensure that nothing
becomes trapped in them as they move.
40 Keys, Doors, Windows
Picture no: 14140s.tif
Child safety system for rear windows 3
Switch between the rock er switches in the
armrest on the driver’s door:
z To the left (red control indicator visible):
Rear windows cannot be operated with
the rocker buttons in the rear doors,
z To the right (green control indicator
visible): Rear windows can be operated
with the rocker buttons in the rear doors.
Picture no: 17899s.tif
Closing windows from outside 3
On vehicles with electric windows in all
doors, the windows can be closed from
outs ide:
Hold button p on the remote control until
all of the windows have closed completely.
Overload
If the windows are repeatedly operated at
short intervals, the power supply is briefly
cut off.
The sy stem is protected by fuses in the
fusebox, see page 186.
Fault
The wind ow s c ann ot be auto matically
opened or closed.
Activate electric windows as follows:
1. Close doors.
2. Switch on ignition.
3. Open window completely.
4. Close window and hold down rocker
switch for at least another 5 seconds.
5. Repeat for each window.
41Keys, Doors, Windows
Picture no: 14251s.tif
Sunroof and tilting roof 3
Front sliding roof
Left rocker switch l and \ between the
sunvisors. O perable when the ignition is on.
To op en :
Press button l, sunroof opens.
To stop the movement, press button ag ain.
To close
Press button \ until the sunroof is closed.
To ra ise
With the sunroof closed, press button \
until sunroof is open.
To low er
Press button l until the sunroof is closed.
Picture no: 14143s.tif
Rear t ilting roof
Right rocker switch \ and w between the
sunvisors. O pera ble when the ignition is on.
To raise
Press button \ until tilting roof has been
raised.
To lower
Press b utton w until tilting roof has closed.
9 Wa rning
Take care when operating sunroof 3 and
tilting roof 3. Risk of injury, especially for
children. Vehicle occup ants must be
informed accordingly.
Keep a close watch on the sliding roof
when closing it. Ensure that nothing
becomes trapped in it as it moves.
42 Keys, Doors, Windows
Sunshade
To reduce the sunlight in the vehicle interior
with the sliding roof closed or raised.
Open or close sunshade as required.
When the sunroof is opened, the sunshade
is also op ened.
Note
z If the top of the roof is wet, raise roof,
allow water to run off and then op en
roof.
z When using a roof rack, check the
clearance of the sunroof, to avoid
damage.
Picture no: 14802s.tif
Fault
If the electric d rive fails, the system is
protected by a fuse in the fusebox see
page 186. Until the fault is remedied,
operate the sunroof as follows:
Push drive cover backwards.
Picture no: 14803s.tif
Press the sprung central part of the drive
shaft in as fa r as possible with a
screwdriver 3 and turn the driveshaft until
the sunroof or tilting roof is closed.
43Seats, Interior
Seats, Interior
Picture no: 13977s.tif
Front seats
Adjust seat longi tudinally
To adjust, pull the handle on the front seat,
slide the seat and release the handle.
Picture no: 13978s.tif
Adjusting the backrest
To adjust, turn handwheel on outboard
side of seat while releasing the load on the
backrest.
Move seat backre st to suit se ating position.
Front sea ts ........... ............................... . 43
Head restraints .... ......... ....................... 45
Armrest 3 ............. ......... ....................... 47
Travel Assistant 3 ............ ................... 47
Rear seats............. ............................... . 50
Flexible Seat S ystem (Flex Space)....... 51
Luggage compartment extension ..... 52
Luggage compartment cover 3... ...... 54
Safety net 3 .... ............................... ...... 55
Lashing eyes 3 ................. ................... 56
Bag hangers 3 ............................... ...... 56
Notes on loading the vehic le ............. . 56
Three-stage safety system............ ...... 58
Three-point seat belts ........... .............. 58
Belt tensioners. ............................... ...... 60
Using the belts ....................... ........ ...... 62
Mounting brackets 3 for ISO-FIX child
restra int system s ........ ............. .......... 64
Child restraint systems 3 ...... ........ ...... 65
Airbag system .......... ............................ 67
Cigarette lighter 3... ......... ................... 79
Accessory sockets 3 ..... ............. .......... 79
Ashtray s .......... ......... ............................ 80
Foldaway ta bles 3 ............................. . 82
Stowage comp artments... ................... 81
Coin holder ........... ......... ....................... 83
Sunvisors.......... ......... ............................ 83
9 Warning
Important: Do not sit nearer than
10 inches (25 cm) from the steering
wheel, to perm it safe airba g deployment.
Never adjust the seat while driving.
It could move in an uncontrolled manner
when the handle is pulled.
44 Seats, Interior
Picture no: 13979s.tif
Adjusting the seat height
To adjust, pull lever up and relieve the load
on the seat cushion, or press the seat
cushion down with your body weight.
Never adjust driver’s seat height while the
vehicle is in motion. Uncontrolled
adjustm ents could occur when the lever is
pulled.
Picture no: 16098s.tif
Adjusting t he lum bar supp ort 3
To adju st, tu rn s ide handw he el o n
outboard side of seat while relieving the
loa d on the backrest.
Ad just lumbar support to suit personal
re quir em e nts.
Picture no: 14100s.tif
Seat position
Adjust driver’s seat such that with the
driver sitting upright, the steering wheel is
held in the area of its upper spokes with the
driver’s arms slig htly bent.
Push front passenger’s seat as far back as
possible.
45Seats, Interior
The seat backrests must not be tilted too
far back. Recommend ed maximum tilting
angle approx. 25°.
Picture no: 13980s.tif
Head restraints
Adjusting t he front head restraints and
the rea r outboard head restraints 3
To adjust head restraint, tilt forward, hold
and adjust height.
To fold over the rear seats or lower the
front passengers seat head restraint all
the way down and remove, see next page.
Picture no: 14102s.tif
Ad justing the rear centre head restraint
To adjust, pull head restraint upwards,
press springs and push head restraint
down.
To improve visibility, push head restraint
down as far as possible if centre seat is
unoccupied or to increase the size of the
luggage compartment.
Fold centre seat – see page 53.
If centre seat is occupied, pull head
restraint upwards.
9 Wa rning
Failure to observe these descriptions
could lead to injuries which could be
fata l. Vehicle p assenge rs must b e
informed accordingly before starting-off.
46 Seats, Interior
Picture no: 14101s.tif
Head restraint position
The middle of the head restraint should be
at eye level. If this is not possible for
extremely tall persons, set to highest
position, and set to lowest position for
small persons.
Picture no: 14287j.tif
Active head restra ints 3
In the event of a rear-end impact, the
active head restraints automatically tilt
forward a little. The head is more
effectively supported by the head restraint
and the danger of injuries caused by
whip la sh in th e ne ck ar ea is re du c ed.
Active head restraints are identified by the
lettering ACTIVE o n th e h ead re s tra in t
guid e sleeves.
Picture no: 11581s.tif
Removing the head restraints
Press and release the two catches.
Pull and remove the head restraint.
Not e
Only approved objects or com ponents
should be attached to the head restraint of
the unoccupied front passenger’s seat.
9 Wa rning
Failure to observe the descriptions can
lead to injuries which could be fatal.
Vehicle passengers must be informed
accordingly before moving away.
47Seats, Interior
Picture no: 14738s.tif
Armrest 3
Arm res t a t driv er s se at
Push raised armrest backwards against
resistance and fold down.
The armrest can be moved to different
positions in stages by lifting it.
Picture no: 14304s.tif
Travel Assistant 3
The Travel Assistant contains:
z Armrest,
z Tray,
z Drink holders.
The Travel Assistant is mounted on the
low ered centre seat (see page 53).
Picture no: 14310s.tif
Insta lling The Travel Assistant
Lower the centre seatsee page 53.
Insert Travel Assistant in rear recesses on
bac k of centre seat.
48 Seats, Interior
Picture no: 14311s.tif
Fold Travel Assistant down and audibly
enga ge in front recesses.
Picture no: 14312s.tif
Armrest
The armrest can be moved and therefore
adapted to the position of the outboard
se ats.
Picture no: 14313s.tif
Tray
There is a tray beneath the armrest.
Open tray by pushing upper button.
9 Wa rning
If it is not c orrectly engaged, the Travel
Assistant can be propelled forward with
considerable force if hard braking occurs,
possibly causing injury.
49Seats, Interior
Picture no: 14314s.tif
Drink holders
Open drink holder on front by pressing
front face.
Picture no: 14315s.tif
Dismantling the Tr avel Assistant
Press lower button on the Travel Assistant.
Picture no: 14316s.tif
Pull Travel Assistant upwards out of
recesses.
There is a carrying handle on the back to
facilitate transport.
It is not necessary to remove the Travel
Assistant if you wish to raise the centre
seat, however, the armrest must be pushed
forwards. Be careful of any items in the
Travel Assistant.
50 Seats, Interior
Picture no: 14178s.tif
Rear seats
Move rear outboard seats
Pull ha ndle under sea t, move se at, re leas e
handle and allow seat to engage.
The b ackres ts must not be in the re armost
position when the seats are moved back, in
order to prevent damage.
Picture no: 14179s.tif
Adjusting backrests of rear
outboard seats
Get hold of bac krest, pull handle at
outboard side of seat and guid e backrest
into the relevant position. Release handle
and allow backrest to engage.
The seat backrest engages in severa l
positions.
To extend the luggage compartment, the
seat can be swivelled down. However, we
recommend always using the seat for
sitting only when in the swivelled-up
position. To extend the lugga ge
compartment, see pag e 52.
9 Warning
To prevent injuries, always hold seat
backrest firmly and guide downwards
when folding.
51Seats, Interior
Flexible Seat System (FlexSpace)
In the rear row of seats, your vehicle offers
either three seats or two seats with more
seating room, in this case the centre seat
must be folded down. The outboard seat
backrests can be swivelled downwards to
increase the size of the luggage
compartment.
Picture no: 14729s.tif
Tw o rear seats with m ore seat ing space
Lower centre seat – see page 53.
Move backrest to centre position, pull
ha ndle beneath s eat, s lide s eat backwards
as far as possible, then slide inwards to
centre of vehicle and further back into the
desired position.
Release handle and allow seat to engage
in position.
Picture no: 14730s.tif
Three seats
Move backrest to centre position, pull
handle beneath seat, slide seat forwards to
the stop, then slide out towards door and
further forward into the desired position.
Release handle and allow seat to engage
in position.
Raise centre seat – see pa ge 53.
52 Seats, Interior
Luggage compartment extension
To increase the size of the luggage
compartment, you can:
z Fold down the outboa rd rear seat
backrests,
z Lowe r the ce ntre seat,
z Swivel down the outboard seats,
z Fold down the front passenger’s seat
backrest 3 .
See following pages for instructions.
The rear seats must be in the outboard
positions, see "Three seats" on the previous
page.
Picture no: 14184s.tif
Fold down outb oa rd rear seat backrest
If necessary, remove luggage
compartment cover 3 – see pag e 54.
Push head restraints down fully -
see pages 4, 45.
Ta ke seat belt out of the belt guide on the
backrest.
Remove the push-in sleeves 3 for m ounting
the IS O-FIX child res traint syste m see
separate instructions for the ISO-FIX child
restraint system.
Picture no: 14182s.tif
Hold the backrest, pull handle at outboard
side of seat and fold backrest down onto
seat cushion. Release handle and engage
backrest.
To raise, pull handle on outboard side of
the seat and raise seat backrest. Release
handle and latch.
Insert seat belt into belt guide on backrest.
9 Warning
To prevent injuries, always hold seat
backrest firmly and guide downwards
when folding.
53Seats, Interior
Picture no: 14728s.tif
Lower centre seat
House centre seat belt in the holder in the
roof see page 63.
Insert seat belts into recesses in seat
cushions.
Push centre head restraint as far down as it
will go see page 45.
Pull release handle at rear of centre
backrest – see illustration. Tilt backrest
forward and engage.
Picture no: 14716s.tif
Raise cent re seat
Pull release handle, m ove backrest up rig ht
and engage. Outboard seats must be in
the outer position to do this see right-
ha nd column on page 51.
Fold ing down out board seats
Push front seats forwards or remove head
restraints on the rear outboard seats –
see page 46.
Fold down outboard rear seat backrests.
To achieve a level loading surface, pull
release handle on back of backrest and
push seat down until it latches into
position.
Raise outboard seats
Pull release handle on back of b ackrest
and pull seat upwards until it engages.
Pull handle on outboard side of rear seat
and move rear seat backrest upright.
Release handle and latch into position.
Insert seat belt into belt guide on backrest.
The seat backrests can be righted even
with the seat swivelled back. We
recommend only using the seat for sitting
while in the swivelled-up position.
9 Wa rning
Loads must not obstruct the operation of
the handbrake and the gears. Pay
attention to notes on pa ge 56.
54 Seats, Interior
Picture no: 14107S.tif
Folding d own the front pa ssenger’s
seat 3
Push front passenger’s seat head restraint
all the way down or remove
see pages 4, 45, 46.
Push front passenger’s seat backwards.
Raise release lever and fold front
passengers seat forwards.
Raise front passenger’s seat backrest 3
Raise release lever, lift front passenger’s
seat a nd audibly engage backrest into
position.
Notes on load ing
See page 56.
Picture no: 14735S.tif
Luggage compartment cover 3
To op en :
Lift cover at rear and tilt forwards, segment
by segment.
To clo se:
Tilt top part of cover backwards and latch
into position.
Do not place any heavy or sharp-edged
ob jects on the cover.
Picture no: 15272s.tif
Removing
Open cover, disengage towards the rear
and remove from above.
Fitti ng
Insert the cover from the rear, clip into
place and fold back.
55Seats, Interior
Picture no: 14736s.tif
Safety net 3
The safety net is installed behind the front
seats with the rear seat backrests folded
forward.
Passengers must not be carried behind the
safety net.
Fitting
Fold all rear seat backrests forwardssee
luggage comp artment e xtension, p age 52.
The roof frame contains two mounting
openings: Open c ov ers.
Hang the upper net rod first in one
aperture and then in the other side; clip in
place by pushing rod forwards into smaller
aperture.
Picture no: 17952S.tif
Hook tension straps into lashing eyes 3 or
slots 3 at the rear of the outer front seat
bracket and tension.
On the version without lashing eyes, when
the safety net is mounted for the first time,
the slots at the rear of the outer front seat
bracket must first be opened:
Press the marked field at the upper edge
with a blunt object a nd fold inwards.
Removing
Tilt belt length adjuster upwards and
unhook belts. Unhook top net rods and
close two mounting openings.
Picture no: 16145s.tif
Stowage of safety net
Roll up the removed safety net and secure
it with Velcro strips.
Store the safety net under the floor in the
luggage compartment. To open, remove
the luggage compartment cover 3, see
page54, lift the floor covering by the
handle and raise towards the front, see
page176. Store safety net in front
recesses.
56 Seats, Interior
Picture no: 14718s.tif
Lashing eyes 3
The lashing ey es in the lugg age
compartment are for securing transported
items to prevent them from slipping
around.
Picture no: 14717s.tif
Bag hangers 3
There are two retainers on the back of the
outer rear seat backrests for hanging
carrier bags on. Maximum load: 10 kg per
re tainer.
Picture no: 14110s.tif
Notes on lo ad ing the vehicle
z Heavy objects in the luggage
compartment should be placed as far
forwa rd as possible ag ainst the enga ged
rear seat backrests or, if the rear seat
backrests are fold ed down, against the
front seat backrests. If objects are to be
stack ed, the hea vier objects should be
placed at the bottom. Unsecured objects
in the luggage compartment would be
thrown forward with great force in the
event of heavy braking, for example.
57Seats, Interior
z Secure heavy objects with lashing
straps 3 attached to lashing eyes 3
see page 56. If heavy loads slip when the
vehicle is braked heavily or driven
around a bend, the handling of the
vehicle may change.
z When transporting objects with rear seat
backrests tilted forward, fit safety net
see page 55.
z Close the luggage compartme nt cover 3
so the rear window does not reflect the
ob je cts.
z If the backrests are not folded down
when transporting objects in the
lugga ge compartment, they must be
engaged in an upright position -
see page 53.
z Do not allow the load to protrude above
the upper edge of the rear seat
backrests, or above the upper edge of
the front seat backrests if the rear seat
backrests are folded down.
z The warning triangle 3 and first-aid kit
(cushion) 3 must always be freely
accessible.
z Do not place any objects in front of the
rear window or on the instrument panel.
They are re flecte d in the glass, obstruct
the driver’s view and will be thrown
th rough the ve hicle, for insta nce in the
event of heavy braking.
z Objects must not be stored in the airbag
inflation area, because they could cause
injury if the airbag inflates.
z Loads must not obstruct the ope ra tion of
the pedals, the handbrake or the gears,
or restrict the drivers freedom of
movement. Do not place loose objects in
the vehicle interior.
z Do not drive with luggage compartm ent
open when transporting bulky objects,
for example, since toxic exhaust fumes
could penetra te the interior.
z Weights, payload and roof load
see page 214.
z A roof load increases the sensitivity of
the vehicle to crosswinds and impairs
vehicle handling due to the vehicle’s
hig her centre of gravity. Driving with a
roof load - see pages 138, 141, 163.
9 Warning
Failure to observe these descriptions can
lead to injuries which ma y be fatal.
Vehic le pa ssengers m ust be inform ed
accordingly.
58 Seats, Interior
Three-stage safety system
Com prising:
z Three-point seat belts,
z Belt tensioners at the front seats,
z Airbag systems for the drivers seat and
front passengers seat 3 as well as the
outboard rear seats 3.
The three stages are activated in sequence
depending on the severity of the accident:
z The automatic seat belt locking d evices
prevent the belt strap from being pulled
out and thus ensure that the vehicle
occupants are retained in their seats.
z The front seat belts are pulled down at
the belt buckles. This means the belts fit
snugly, the occupants are decelerated
early with the vehicle and the stress
placed on the body is reduced .
z The airbag systems are also triggered in
the event of severe accidents and form a
safety cushion for the occupants.
Alw ays read the instructions provided w ith
the child restraint system!
Picture no: 13982.tif
Three-point seat belts
The vehicle is equipped with three-point
seat belts with automatic retractors and
locking d evices, allowing freedom of body
movement although the spring tensioned
belts always ensure a snug fit.
For information on correct seating
position – see pages 44, 62, 68.
The belt has a "vehicle sensitive retractor"
which is designed to lock during heavy
acceleration or deceleration in any
direction.
9 Warning
The airbag systems serve to supplement
the three-point seat belts and belt
te ns ioners. The seat b elts must there fore
alway s be w orn. Disreg ard of these
instructions may lead to injuries or
end ang er life. Vehicle p assenge rs must
be informed a ccord ingly.
59Seats, Interior
In the event of an accident, persons not
wearing seat belts endanger their fellow
occupants and themselves.
Control indicator X for the seat belt –
see page 84.
Seat belts are designed to be used by only
one person at a time. They are not suitable
for anyone under 12 years of age or
150 cm.
For childre n up to 12 yea rs of ag e, w e
recommend the Vauxhall child restraint
system – see page 65.
Belt force limi ter s
Belt force limiters on the front seats reduce
the body load, due to damped release of
the belt on a collision. This means that the
seat occupants move forward under
control.
Testing the belts
Check all parts of the belt system
periodically for dam age and correct
functioning. Replace dam aged
components. After an accident, have the
belts and triggered belt tensioners
replaced by a workshop.
Do not perform any alterations on the
belts, their anchorages, the automatic
retractors or the belt buckles.
Make sure that belts are not damaged or
trapped by sharp-edged objects.
9 Wa rning
Always wear your seat belt, and that
means also in urban traffic and when you
are a rear sea t passenger. It can save
your life!
Also, pregnant women must always wear
a seat beltsee page 62.
60 Seats, Interior
Picture no: 14719s.tif
Belt tensioners
The front seat belt systems are equipped
with belt tensioners. In the event of a head-
on or rear-end collision of a certain
severity, the belt buckles are pulled down,
thus tightening the belts.
Actua tion of belt t ensioners
Indicated by illum ination of control
indicator v, see next colum n.
If the belt tensioners are triggered, they
must be replaced by a workshop.
Picture no: 17885s.tif
Control i nd icator v for belt tensioners
The function of the belt tensioners and
airbag systems is monitored electronically
and indicated by the control indicator v.
When the ignition is turned on, the control
indica tor illum inates for approx. 4 seconds.
If it does not illuminate, or if it does not go
out after 4 seconds, or if it illuminates while
driving, there is a fault in the belt tensioner
or airbag systems, see page 72. The
systems might not trigger in the event of an
accident.
Deployment of the belt tensioners is
indica ted by continuous illumination of v.
Self-diagnosis integrated into the system
allows rapid fault identification.
9 Warning
Eliminate the cause of the fault
immediately by a workshop.
61Seats, Interior
Im portant
z Do not fit accessories not specifically
released for your vehicle type or store
ob jects in the belt tensioner operating
area (in the area of the be lt tensioners)
due to the risk of injury in the event the
belt tensioners are triggered.
z Do not m ake any modifications to the
com ponents of the belt tensioners, as
this will render the vehicle unroadworthy.
z The belt tensioner and airbag system
control electronics can be found in the
centre console area. In order to avoid
malfunctions, do not store magnetic
objects in this area.
z When using the rear seats, ensure that
the front seat belt components are not
damaged by shoes or other objects.
Avoid dirt getting into the belt retractors.
z We recommend that you have the front
se ats remove d by a w orkshop in the
event of actuation of the belt tensioners.
z The belt tensioners trigger once only,
ind icated by the illumination of control
ind icator v. Have a workshop replace
triggered belt tensioners.
z Whe n disposing of the vehicle, the sa fety
instructions given for this must be
observed . Ta ke the vehicle to a recycling
company for disposal.
9 Wa rning
Incorrect handling (e.g. removal or fitting
of seat belts or belt buckles) can trigger
the belt tensioners; risk of injury.
62 Seats, Interior
Picture no: 14120s.tif
Using the belts
Fitting seat belts
Pull the belt out of the retractor and guide
it across the body, making certain that it is
not twisted.
Insert the latch plate into the buckle. The
front seat backrest must not be tilted back
too far or the seat belt will not op erate
properly. The recommended angle of
inclina tion is 25°.
Make sure that the lap belt is not twisted
and that it fits snugly across the body.
Tension the belt frequently while driving by
tugging the diagonal part of the belt.
Picture no: 14121s.tif
Bulky clothing prevents the belt from fitting
properly. The belt must not rest against
ha rd or fragile objects in the pockets of
your clothing (e.g. ballpoint pens, keys,
spectacles) because these could cause
injury. Do not place any objects (e.g.
ha ndbags, mobile phones) between the
belt and your body.
Picture no: 14122s.tif
Height adjustment
For height adjustment of the upper guiding
point of the front seat belts:
1. Pull belt out slig htly.
2. Push button on sliding adjuster.
3. Set desired height.
4. Allow sliding adjuster to audibly latch.
Do not adjust height while driving.
9 Warning
O n pregna nt wo me n in particular, the lap
belt must be positioned as low as
possible across the pelvis so as not to put
too much pressure on the abdomen.
63Seats, Interior
Picture no: 13982s.tif
Adjust height such that the belt p asses
over the wearers shoulder and rests
against the shoulder. It must not pass over
the neck or upper arm.
Picture no: 14123s.tif
Removing the belt
To remove the belt, depress the red
pushbutton on the buckle; the belt will
retract automatically.
Picture no: 14124S.tif
Three- point seat belt on c entre rear seat
Pull latch plates out of belt retainer in roof.
Click bottom latch plate into right-hand
buckle (1) on centre seat. Remove top latch
plate from reta iner, guide over shoulder
and lap area with belt (d o not twist) and
click into left buckle (2) on centre seat.
If using the centre seat, both outboard
seats must be pushed backwards and the
backrests must be flush with the centre
seat backrest, see p age 51.
6
64 Seats, Interior
Picture no: 14739S.tif
To remove the b elt, press the button on the
left sid e of the buck le (2). If the central seat
is to be lowered, press the button on the
right side of the buckle (1). The belt retracts
automatically.
Push the upper latch plate into the holder
for the lower latch plate. Fold over locked
together latch plates ag ainst the belt.
Picture no: 14740S.tif
Insert in the belt retainer in the roof with the
low er latch plate pointing forwards.
Mounting brackets 3 for ISO-FIX
child restraint systems
The brackets located between the backrest
and seat cushion are used for mounting
ISO-FIX child restraint systems.
Please follow the instructions
accompanying the ISO-FIX child restraint
system.
O nly ISO -FIX child res traint syste ms
approved for the vehicle may be used.
65Seats, Interior
Child restraint systems 3
When using a child restraint system, follow
the instructions for installation and use.
The country in which you are travelling
may not permit the use of child restraint
systems on certain seats. Always comply
with the local or national regulations.
Selecting the right system
Your child should travel facing backwards
in the vehicle for as long as possible.
A child has a very weak cervical sp inal
column and in the event of an accident is
less likely to suffer injury in a rearward-
facing, semi-lying position than if seated
upright.
9 Wa rning
Never carry child restraint systems on
your lap, risk of fatal injury.
Permissible options for fitting a child safety seat
1)
1)
For reason s of safety, we recomm end that the ch ild safety seat be installed on
one of the outer rear seats.
Weight
and
age class
2)
2)
We recommend the use of each system until the child reaches the upper weight limit.
On
front
passengers seat
On
outboard rear seats
On
centre rear seat
0:
up to 10 kg
or approx.
10 months
0+ :
up to 13 kg
or approx.
2 years
B
1
, + U, + U, + +
I:
9 t o 18 kg
or approx.
8 months to
4years
B
2
, + U, + U, + +
II:
15 to 2 5 kg
or approx.
3 to 7 y ears
III :
22 to 3 6 kg
or approx.
6 to 12 ye ars
X U U, ++
66 Seats, Interior
Not e
z Children under 12 years or under 150 cm
tall should only travel in an ap propriate
child sa fety seat.
z When transporting children, use the child
restraint systems suitable for the child’s
weight.
z Check that the child restraint systems
have been correctly installed see
instructions provided with child restraint
sy ste m.
z The covers of the Vauxhall child restraint
sy ste m can b e wipe d cle an.
z Do not stick anything on the child
restraint systems and do not cover them
with any other materials.
z Only allow child ren to enter and exit at
the side facing away from the traffic.
z A child restraint system which has been
subjected to stress in an accident must
be replaced.
z Secure or remove child restraint systems
carried in the vehicle when not in use.
B
1
= Conditional, without front
passenger’s airbags or with seat
occupancy recognition and
Vauxhall child restraint systems with
transponders.
The front passengers seat m ust
also have a height adjusting facility:
Move to highest position, slide front
passenger’s seat all the way back
and move front passeng er’s seat
belt anc horage point to lowest
possible position.
B
2
= Conditional, without side airbag
with front pa ssenger’s seat slid all
the way back, or with seat
occupancy recognition and
Vauxhall child restraint systems with
transponders.
The front passengers seat m ust
also have a height adjusting facility:
Move to highest position and slide
front pa ssenger’s seat all the way
back so that the seat belt runs
towards the front from the
anchorage point.
U = For universal use in combination
with three-point seat belt.
+ = Vehicle seat available with ISO-FIX
fixings. When using ISO-FIX, only
ISO-FIX child restraint systems
approved for the vehicle may be
used.
++ = Only if both outboard rear seats are
pushed back and are flush with the
centre seat.
X = N o child re straint sy ste m pe rmitted.
67Seats, Interior
Picture no: 16424s.tif
Airbag system
Front airb ag
The front airbag system is identified by the
word AIRBAG on the stee ring wheel and
above the glove com partment 3.
The front airbag system comprises:
z An airbag with inflator in the steering
wheel and a second behind the trim
panel above the glove compartment,
z The control electronics with impact
se nsor,
z Control indicator for airbag systems v in
the in strume nt clus ter,
Picture no: 14317s.tif
z Seat occupancy recognition 3,
z The control indicator for Vauxhall child
restraint systems with transponders y 3
in the courtesy light.
The front airbag system will be trigg ered:
z Depending on the severity of the
accident,
z Depending on the type of impact,
z Within the range shown in the
illustration,
z Independently of the side airbag
system 3 and curtain airbag system 3.
Exception:
Front passenger’s seat with seat
occupancy recognition system 3.
The seat occupancy recognition system
deactivates the front and side airbags on
the passenger’s side if the front
passengers seat is unoccupied, or a
Vauxhall child restraint system with
transponders 3 has been fitted to the front
passengers seat.
Seat occupancy recognition see page 73.
Vauxhall child restraint system with
transponders 3see page 74.
Examples of events triggering the front
airbag system:
z Impact against a non-yielding obstacle:
The front airbags are triggered at low
vehicle speeds.
z Impact against a yielding obsta cle (such
as another vehicle):
The front airbags are only trig gered at
hig her ve hicle s pee ds .
68 Seats, Interior
Picture no: 14125s.tif
When triggered, the front airbags inflate in
milliseconds to form a safety cushion for
the driv er and front passenger. The
forward movement of the front seat
occupants is checked, thereby
substantially reducing the risk of injury to
the upp er body and head.
No im pairment of view will occur, because
the airbags inflate and deflate so quickly.
Picture no: 14100s.tif Picture no: 13982.tif
The front airbag system will not be
triggered in the event of:
z The ignition being switched off,
z Minor frontal collisions,
z Accidents in which the vehicle overturns,
z Collisions involving a side or rear-impact,
that is to say, if it w ould not be of benefit to
the occupants.
9 Warning
The front airbag system provides
optimum protection when the seat,
backrest and head restraint are correctly
adjusted: Adjust the drivers seat
according to the occupant’s height such
that with the driver sitting upright the
steering wheel is held in the area of its
upper sp ok es with the d riv ers arms
slightly bent.
The front passenger’s seat should be as
far back as possible, with the backrest
upright (see pages 3, 44). Do not place
your head, body, hands or feet on the
covers of the airbag systems.
Do not place any objects in the area in
which the airbags inflate. Important
information – see page 75.
9 Warning
The three-point seat belt must be
correctly fitted – see page 62.
69Seats, Interior
In addition, the front airbag system will not
be triggered for the front passenger in
model variants with seat occupancy
re cognitio n 3 if:
z The front passenger’s seat is
unoccupied,
z There is a properly fitted Vauxhall child
restraint system with transpond ers 3.
Seat occupancy recognition – see page 73.
Vauxhall child restraint system with
transponders 3 see page 74.
Picture no: 14741s.tif
Si de airba g 3
The side airbag syste m is identified by the
word AIRBAG on the outboard sides of the
front se at back rests.
The side airbag sy ste m compris es:
z An airbag w ith inflator in the back of the
driver’s and front passengers seat
respectively,
z The control electronics,
z The side-impact sensors,
z Control indicator for airbag systems v in
instrument cluster,
z Seat occupancy recognition 3,
z The control indicator for Vauxhall child
res tra int sy ste ms with transp onde rs y 3
in the courtesy light.
6
9 Wa rning
Seat belts must therefore always be worn.
The front airbag system serves to
supplement the three-point seat belts.
If you do not wear your seat belt, you risk
being seriously injured, or even thrown
from the vehic le, in the event of an
accident.
In the event of an accident, the belt helps
to keep you in the correct seating
position, so tha t the front airbag system
can provide you with effective protection.
70 Seats, Interior
Picture no: 14318s.tif
The side airbag system will be triggered:
z Depending on the severity of the
accident,
z Depending on the type of impact,
z Within the range shown in the
illustration, from the centre d oor pillar on
the drivers or front passenger’s side,
z Independently of the front airbag
system .
Exce ption:
Front passenger’s seat with seat occupancy
re cogn itio n s yste m 3. The seat occupancy
recognition system deactivates the
passengers front and side airbags if the
front passengers seat is unoccupied, or a
Vauxhall child restraint system w ith
tran s po nd e rs 3 has been fitted to the front
passengers seat.
Seat occupancy recognition – see page 73.
Vauxhall child restraint system with
transponders 3 see page 74.
Picture no: 14742s.tif
When deployed, the side airbag inflates
within milliseconds to form a safety cushion
for the driv er or front passenger in the
respective front door area. This
substantially reduces the risk of injury to
the upper bod y and pelvis in the event of a
side-on collision.
71Seats, Interior
The sid e airbags w ill not be trigg ered in the
event of:
z The ignition b eing switched off,
z Frontal collisions,
z Accidents in which the vehicle overturns,
z Collisions involving a rear-impact,
z Collisions involving a side-impact outside
the passenger cell.
In addition, the side airbag system will not
be triggered for the front passenger in
model variants with seat occupancy
recognition 3 if:
z The front p assenge rs seat is
unoccupied,
z There is a properly fitted Vauxhall child
restraint system with transponders 3.
Seat occupancy recognition – see page 73.
Vauxhall child restraint system with
transponders 3 – see page 74.
Picture no: 14129s.tif
Curtain airbag 3
The curtain airbag system is identified by
the word AIRBAG on the roof pillar trim.
The curtain airbag system comprises:
z An airbag with inflator in the roof frame
on the driver’ s and front passenger’s side
respectively,
z The control e lectronics,
z The side -impact sens ors,
z Control indicator for airbag systems v in
the instrument cluster.
Picture no: 14318s.tif
The curtain airbag system will be triggered:
z Depending on the severity of the
accident,
z Depending on the type of impact,
z Within the range shown in the
illustration, from the centre door pillar on
the drive rs or front pa ssenge rs side ,
z Tog ether with the side airbag system,
z Irrespective of seat occupancy
recognition,
z Independently of the front airbag
sy ste m.
6
9 Wa rning
The re m ust be no objects in the area in
which the airbag inflates or in the area
between the seat backs and the vehicle
body. Do not place the hands or arms on
the covers of the airbag systems.
Important informationsee page 75.
The three-point seat belt must always be
correctly fitted see page 62.
72 Seats, Interior
Picture no: 14127s.tif
When the curtain airbag is triggered, it
inflates within milliseconds and provides a
safety barrier in the head area on the
respective side of the vehicle. This reduces
the risk of injury to the head c onsiderab ly in
case of a sid e-impact.
The curtain airbags will not be triggered in
the event of:
z The ignition being switched off,
z Frontal c ollisions,
z Accidents in which the vehicle overturns,
z Collisions involving a rear-impact,
z Collisions involving a side-imp act outside
the passenger cell.
Picture no: 17885s.tif
C ontrol indic ator v for ai rbag system s
The function of the airbag systems is
monitored electronically together with the
seat occupancy recognition 3 and the belt
tensioners, and indicated by the control
indicator v.
When the ignition is switched on, the
control indicator illum inates for approx.
4 seconds. If it does not illuminate, does
not go out after 4 seconds or illuminates
while driving, there is a fault in the a irbag
systems, seat occupancy recognition 3 or
in belt tensioners. See also page 60. The
systems may fail to trigger in the event of
an accident.
Deployed airbags are indicated by
continuous illumination of v.
9 Warning
There must be no objects in the area in
which the airb ag inflates or in the area
between the seat backrests and the
vehicle body.
Do not place the hands or arms on the
covers of the airbag systems.
Important information see page 75.
The three-point seat belt must alw ays be
correctly fitted – see page 62.
73Seats, Interior
Self-diagnosis integrated into the system
allows rapid fault identification.
Seat oc cupancy recognition 3
The seat occupancy recognition system
deactivates the front and side front
passenger’s airbags if the front
passenger’s seat is unoccupied or a
Vauxhall child restraint system with
transponders 3 has been fitted to the front
passenger’s sea t. The curtain airbag
system 3 remains activated.
The control indicator for seat occupancy
recognition y is located in the front
courtesy light. If control indicator y
illuminates for approx. 4 seconds after the
ignition is switched on, the vehicle is
equipped with seat occupancy recognition
see page 74, Fig. 12135 S.
If a Vauxhall child restraint system
with transponders 3 is fitted, control
indicator y illuminates perm anently after
the ignition is switched on, as soon as the
system has detected the child restraint
system. Only then may the child restraint
system with transponders 3 be used on the
front passenger’s seat.
Picture no: 15844t.tif
Vehicles with seat occupancy recognition
can be identified by the sticker on the front
passenger’s seat or on the side of the
instrument panel.
Vauxhall child restraint systems w ith
transponders 3 are automatically
detected if correctly fitted to the front
passengers seat. When these child
restraint systems are being used on the
front passengers seat, the front and side
airbag systems for the front passenger’s
seat are deactivated. The curtain airbag
sy ste m rem ains ac tiv ated.
Pay attention to the control indicator y
for seat occupancy recognition 3
see page 74.
Vauxhall child restraint systems with
transponders 3 can be identified by a
sticker or badge.
9 Wa rning
Have the cause of the fault eliminated
im med ia t el y by a wo rk sh o p .
9 Warning
Only Vauxhall child restraint systems with
transponders 3 can be fitted on the front
pas seng er’s seat. Us e of sy ste ms w ithout
transponders poses a risk of fatal injury.
74 Seats, Interior
Cont rol indica tor y for Vauxha ll child
restraint systems with transponders 3
The p resence of a Vauxhall child restraint
system with transponders is ind icated after
the ignition has been switched on, by
permanent illumination of the control
indicator y in the front courtesy light, as
soon as the seat occupancy recognition
system has detected the child restraint
system.
Picture no: 12097s.tif
If control indicator y does not illuminate
while driving, the front and side airbags for
the front passenger’s seat have not been
deactivated and there is a risk of fata l
injury to the child. In this case, only fit child
restraint systems to the outer rear seats.
Have the cause of the fault eliminated by a
workshop.
If the child restraint system is not correctly
installed or the transponders a re defective,
the control indicator will fla sh. Check for
correct child restraint system installation.
For installation of child restraint system
with transponders 3 – see instructions
provided with child restraint system.
If control indicator y flashe s when the
child restraint system with transponders is
correctly fitted, there is a fault, with risk of
fatal injury to the child. In this case, only fit
child restraint systems to the outer rear
seats. Have the cause of the fault
elimina ted by a workshop.
If no Vauxhall child restraint system
with transponders is fitted, the control
indicator must not illum inate or flash,
as the front passenger’s airbag systems
would not deploy in the event of a collision.
Have the cause of the fault eliminated by a
workshop.
75Seats, Interior
Imp or tant
z Due to risk of injury when the airbags
deploy, accessories and objects should
not be placed within the expansion
range of the airbag systems.
z Do not place any objects between the
airbag systems and the vehicle
occupants; risk of injury.
z Use the hooks in the roof frame only to
hang up light articles of clothing or coat
hangers. Do not place any objects in the
pocke ts of the hanging item s – risk of
injury.
z The airbag systems and belt tensioner
control electronics can be found in the
centre console area. In order to avoid
malfunctions, do not store magnetic
objects in this area.
z Do not stick anything on the steering
wheel, instrument panel, front seat
backrests or roof frame, in the vicinity of
the airbags, or on the front p assenger’s
seat cushion, or cover any of those areas
with other materials.
z Use only a dry cloth or interior cleaner to
clean the steering wheel, instrument
panel, front seat backrests, roof fra me
and seat cushion of the front
passeng er’s seat. Do not use any
aggressive cleaning agents.
z Only protective covers which are
approved for your vehicle with side
airbag may be fitted on the front seats.
When fitting the protective covers, make
sure that the airbag units on the
outboard sides of the front seat
backrests are not covered.
z The airbag systems are triggered
ind ependently of each other depending
on the severity of the accident and the
type of imp act. The side airbag syste m 3
and the curtain airbag system 3 are
triggered together. See seat occupancy
recognition 3 on page 73 for exceptions.
z Each airbag deploys once only. Have a
workshop replace deployed airbags
immediately.
9 Wa rning
If a Vauxhall child restraint system with
transponders has been fitted according
to the instru ctions, th e cont rol indica tor
for Vauxhall child restraint systems with
tran s po n ders y must illuminate in the
front courtesy light when the ignition is
switched on.
If the control indicator does not illuminate
while driving, the front passenger’s
airbag systems have not been
deactivated and there is a risk of fatal
injury. In this case, fit child restraint
system s to the outer rear seats only. Have
the cause of the fault eliminated by a
workshop.
9 Warning
Never carry child restraint systems or
other objects on your lap - risk of fatal
injury.
76 Seats, Interior
z The speeds, directions of movement and
deformation properties of the vehicles,
and the properties of the obstacle
concerned, determine the severity of the
accident and trig gering of the airbags.
The degree of damag e to y our v ehicle
and the resulting repair costs alone are
not indicative that the criteria for
triggering of the airbags were met.
z Do not perform any alterations on the
com ponents of the airbag system, as this
would render the vehicle unroadworthy.
z We recom mend hav ing the steering
wheel, the instrument p anel, all panelling
parts, the door seals, the handles and
the seats removed by a workshop.
z When disposing of the vehicle, the safety
instructions given for this must be
observed. Take the vehicle to a recycling
company for disp osal.
z Persons weighing less than 35 kg should
only travel on the rear seats. This does
not apply to children who are travelling
in child restraint systems with
transponders 3.
z In vehicles with seat occupancy
recognition 3, do not place any heavy
objects on the front passengers seat
otherwise the airbag systems for the
front passenger’s seat may be triggered
in the eve nt of an accident.
z In vehicles with seat occupancy
recognition 3, to prevent malfunctions
do not use protective c ov ers or extra seat
cushions on the front passenger’s seat.
z When using a Vauxhall c hild restraint
sy ste m with transponders 3 on the front
passeng er’s seat, in order to prevent
malfunctions, no objects (e.g. plastic
sheet, stickers or heated mats) may be
placed under the child restraint system.
9 Wa rning
The systems can be triggered abruptly
and cause injury if they are handled
im pro p er ly.
9 Warning
Child restraint systems as well as other
objects must never be carried on the lap
of pass enge rs; risk of fatal injury . If
carried in this way, child restraint systems
with transponders 3 in vehicles with seat
occupancy recognition 3 could lead to
front passengers airbag systems not
being triggered in the event of an
accident.
77Seats, Interior
Use of child restraint systems 3 on the
front passenger’s seat in vehicles with
airbag system s 3, but w ithout seat
occupa ncy recog nition 3
Picture no: 11704a.tif
Vehicles with front passeng er’s airbag can
be recognised by the word AIRBAG above
the glove compartment and by the sticker
on the instrument panel on the passenger’s
side - see illustration above.
Picture no: 14791s.tif
A vehicle with side airbags can b e
identified by the word AIRBAG on the
outboard sides of the front seat backrests.
Seat occupancy recognition 3
see page 73.
9 Wa rning
Vehicles with front passengers airbag
without side airbag 3: Child restraint
system s fac ing the re ar of the ve hicle
must not be installed on the front
passenger’s seat, risk of fatal injury.
Child restraint systems facing the
direction of travel (child restraint systems
for weight classes I, II a nd III, see p age 65)
may be installed on the front passenger’s
seat if the seat has been pushed back as
far as it will g o and the backrest has been
adjusted suc h that the lap belt fits snugly.
9 Warning
Vehicles with side airbag 3:
No child restraint system 3 may be
fitted on the front passenger’s seat;
risk of fatal injury.
78 Seats, Interior
Picture no: 15844t.tif
Use of child restraint systems 3 on front
passenger’s seat in vehicles with airbag
systems 3 a nd wit h seat occupancy
recognition 3
Vehicles with seat occup ancy recognition
are identified by a sticke r on the lower
panel of the front passenger’s seat
see illustration above.
Picture no: 12097s.tif
Vehicles with seat occupancy recognition
can also be recognised by control
indica tor y in the front courtesy light.
If control indicator y illuminates for
approx. 4 seconds after the ignition is
switche d on, the vehicle is equippe d with
seat occupancy recognition - see page 73.
The seat occupancy recognition system
detects Vauxhall child restraint systems
with transponders 3 and switches off the
front and side airbag systems for the front
passengers seat. The curtain airba g
system remains activated.
Seat occupancy recognition – see page 73.
Vauxhall child restraint systems with
transponders 3 can be identified by a
sticker or badge.
9 Wa rning
Only Vauxhall child restraint systems with
tran s po n ders 3 can be fitted on the front
passenger’s seats. Use of systems
without transponders poses a risk of fatal
in j u ry.
79Seats, Interior
Picture no: 14111s.tif
Cigarette lighter 3
The cigarette lighter is behind the ashtray
cover.
The cover opens when pressed at the
centre point. See Fig. 14354 S on page 80.
Press in cigarette lighter with the ignition
switched on. Switches off autom atically
when elem ent is glowing. Withdraw
cigarette lighter.
Picture no: 16111s.tif
Accessory soc kets 3
An accessory socket is located behind the
ashtray cover. Additional accessory
socke ts 3 can be found in the centre
console in front of the backrests and in the
lugg age compartment.
Ac cessory sockets can be used to connect
electrica l accessories.
Ac cessory socke ts are operable when the
ignition is switched on. Use of the sockets
while the engine is not running w ill drain
the battery.
Do not damage the socket by using
unsuitable plugs.
The maximum power consumption of
electrical ac cessories must not exceed
120 watts.
Do not connect any current-delivering
accessories, e.g. electrical charging
devices or batteries.
Electrical accessories connected to the
socket must comply with the
electromagnetic compatibility
requirements laid down in DIN VDE 40 839,
otherwise vehicle malfunctions may occur.
If the tyre repair kit is 3 is in operation, no
consumers may be connected to the
auxiliary socket.
80 Seats, Interior
Picture no: 14111s.tif
Ashtrays
To be used only for ash and not for
combustible rubbish.
Ashtray, front
The cover opens when pressed at the point
indicated.
Picture no: 16110s.tif
To empty, grip both sides of the ashtray
insert a t the points illustrated and pull
up wards.
Picture no: 14114s.tif
Rear ashtray 3
In the rear centre console.
To open, pull ashtray towards the rear of
the vehicle.
To empty, open the ashtray, press the
spring (see arrow in illustration) and pull
out the ashtray.
9 Wa rning
Failure to observe these descriptions can
lead to injuries which may be fatal.
Vehicle passengers must be informed
accordingly.
81Seats, Interior
Picture no: 17884s.tif
Ashtray 3
For universal use in vehicle interiors, e.g. in
the front or rear of the centre console or in
foldaway tables 3 (see next page).
Open cover to use.
Picture no: 11699s.tif
Stowage compartments
Stowage compartment beneath front
passenger’s seat 3
Lift tray by grasping recessed edge and
pull forwards. Maximum load: 1 kg.
To close the tray, push it in and lock it in
place.
Picture no: 14115s.tif
Glov e c ompar tment
To open, pull handle upwards.
On the inside of the glove compartment
cover there is a pen holder.
The glove com partment should be closed
while driving.
Cooled glove compartment 3
see page 119.
82 Seats, Interior
Picture no: 11701s.tif
Stow age com partm ent for glasses 3
Located on d rivers side. Fold down to
open.
Do not store heavy objects in the stowage
compartment.
Picture no: 16384s.tif
Stowage compartments in rear footwell 3
To open, unclip cover at recess and lift up.
Foldaway tables 3
Located on the front seat backrests.
Open by pulling upwards until it engages.
Fold away by pressing dow n past the
resistance point.
Do not place any heavy objects on the
foldaway tables.
83Seats, Interior
Picture no: 14116s.tif
Coin holder
Located in the centre console.
Sunvisors
Use the sunvisor to protect from glare, by
pulling it down and/or swivelling it to the
side .
While driving, the mirrors in the sunvisors
should be covered.
84 Instruments, Controls
Instruments,
Controls
Control indicators ...................... ......... . 84
Instrument display ............ ................... 89
Information display . .............. .............. 92
Warning buzzers........................ .......... 103
Windscreen wiper ...................... .......... 103
Windscreen wash system and
headlight wash system 3 ................. 104
Rear window wash and wiper system 104
Picture no: 17876s.tif
Control indicators
The control indicators described here are
not present in all vehicles. The descriptions
however, apply to all instrument versions.
The control indicator colours mean:
Picture no:
X
Seat belt wa rning devic e 3
Control indicator illuminates in red.
Illuminates after turning on the ignition
(with warning tone) until the seat belt is
applied. Apply seat belt, see page 62.
B
Ad aptive Forwa rd Lighting (AF L ) 3
Control indicator illuminates in yellow .
If it is illuminated:
Fault in syste m.
Contact a workshop for help.
AFL 3 – see page 109.
z Red
Danger, important remind er,
z Yellow
Warning, note, fault,
z Green
On confirmation,
z Blue
On confirmation.
85In struments, Controls
Picture no: 18385s.tif
>
Front fog lig hts 3
Control indicator illuminates in green.
It is illuminated when the front fog lights
are on see page 106.
A
Engine electronics,
tra nsm ission electronic s, immob iliser,
diesel fuel filter 3, Easytronic 3, fault
Control indicator illuminates or flashes in
yellow.
It illuminates for a few seconds when the
ignition is switched on.
Picture no:
Illuminates when the engine is running:
Fault in engine or gearbox electronic
sy ste m. E lectronics hav e switched to
emergency running programme. Fuel
consumption may be increased and the
vehicle’s driveability reduced, see
page 147. Contact a workshop
immediately.
For vehicles with a diesel engine, the diesel
fuel filter may need to be drained of water,
see page 230.
If it flashes when the ignition is on:
Fault in the electronic immobiliser system;
the engine cannot be started –
see page 27.
Z
Exhaust emission
Control indicator illuminates or flashes in
yellow.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
If it illuminates when the engine is running:
Fault in emission control system. The
permitted emissions may be exceeded.
Contact a workshop immediately.
If it flashes when the engine is running:
Fault which could lead to damage to the
catalytic converter, see page 147. Contact
a workshop immediately.
v
Airb ag system s 3,
b elt tensioners
Control indicator illuminates in red.
If it illuminates when the engine is running:
Fault in the airbag or belt tensioner
systems, see pages 60, 72.
86 Instruments, Controls
Picture no: 17876s.tif
I
Engine oil pressure
Control indicator illuminates in red.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts.
If it illuminates when the engine is running:
Engine lubrication ma y b e interrupted. This
may result in d amage to the engine a nd /or
locking of the drive wheels:
1. Move out of the flow of traffic as quickly
as possible, without impeding other
vehicles.
2. Depress clutch.
Picture no:
3. Move gearshift lever to neutra l, or with
Easytronic3, place selector lever in N.
4. Switch off ignition.
Check oil level before contacting a
workshop.
9 Warning
When the engine is off, consid erably
more force is needed to brak e and steer.
Do no t rem ov e ke y until ve hicle has come
to a standstill, otherwise the steering
column loc k could engage unexpectedly.
O
Turn signal lights
Control indicator flashes green.
The corresponding control indicator
flashes on the side selected.
Both control indicators flash with the
hazard warning lights on.
Rapid flashing:
Failure of a turn signal bulb or
associated fuse.
Change bulbs, see page 190.
Fuses, see page 188.
C
Headl ight main beam
Control indicator illuminates in blue.
It is illuminated when main beam is on and
during headlight flashsee pages 9, 105.
87In struments, Controls
Picture no: 18385s.tif
j
Easytronic 3, start engi ne
Control indicator illuminates in yellow.
It illuminates if the footbrake is not applied
when starting the engine. The indicator
goes off as soon as the footbrake is
applied. The engine can only be started
with the footbrake applied, see page 133.
T
Easytronic winter programme 3
Control indicator is illuminated when winter
programme is enab led.
Further information – see page 135.
Picture no:
m
Cruise control 3
Control indicator illuminates in green.
It is illuminated when the system is on – see
page 151.
r
Fog t ail light
Control indicator illuminates in yellow.
It is illuminated when the fog tail light is on
– see page 107.
p
Alternator
Control indicator illuminates in red.
It illuminates when the ignition is switched
on and goes out shortly after the engine
starts .
If it illuminates when the engine is running:
Stop, switch off engine. Battery is not
charging. Check drive belt condition and
tensioning before contacting a workshop.
R
Brake system,
clut ch system 3
Control indicator illuminates or flashes in
red.
It illuminates after the ignition is turned on,
when the handbrake is applied or if the
brake or clutch fluid level is too low. For
further information, see pages 156, 232.
On vehicles with Easytronic 3, control
indicator R flas h es for a few se cond s after
the ignition is switched off, if the
handbrake has not been applied.
u
Anti-lock Brake System (ABS)
Control indicator illuminates in red.
If it illuminates while driving:
Fault in ABS, see page 156.
9 Warning
Illum ina te s when th e ha nd brake is
applied. Stop driving immediately.
Contact a workshop imm ediately.
88 Instruments, Controls
Picture no: 17876s.tif
S
Eng ine oi l level 3
Control indicator illuminates in yellow.
In vehicles with engine oil level check, the
oil level is checked automatically .
If it illuminates when the engine is running:
Engine oil level too low. Check engine oil
level and top up engine oil if necessary, see
page 228.
EPS
1)
E lec tric P owe r St ee ring
Control indicator illuminates in yellow.
Fault in Electric Power Steering. Vehicle can
still b e driven, but greater force is required
for steering. Contact a workshop
immediately.
Picture no:
v
Electronic Stab ility Program me
(E SP ®
Pl us
) 3
Control indicator flashes or illuminates in
yellow.
If it flashes during driving:
System actively engaged, see page 149.
If it illuminates while driving:
Fault in Electronic Stability Program me,
see page 149.
Y
Fuel level
Control indicator illuminates or flashes in
yellow.
If it illuminates:
Low fuel level, fuel gauge in reserve area.
1)
EPS = Electric Power Steering.
If it flashes:
Fuel supply exhausted, refuel immediately.
Never let the tank run dry!
Erra tic fuel supply can c ause catalytic
converter to overheat, see page 145.
Diesel engines:
If the tank is run dry, bleed the fuel system
as described on page 170.
!
Preheating system for diesel engines 3,
d iesel par ticle filt er 3
Control indicator illuminates in yellow .
Prehe ating system active, switches on only
if outside temperature is low.
If it flashes (with diesel particle filter):
Diesel particle filter must be cleaned.
Continue driving, and as soon as road and
traffic conditions allow, increase speed to
over 25 mph (40 km/h) to start cleaning of
the diesel p artic le filter. The control
indicator goes out when cleaning is
complete. We recommend not turning off
the ignition during cleaning.
Further informationsee page 148.
89In struments, Controls
Picture no: 12097s.tif
y
Seat oc cupancy recognition 3
see pages 67, 73.
Picture no: 17879s.tif
In strument displa y
In some versions, the pointers of the
tachometer, the speedometer, the coolant
temperature gauge and the fuel gauge
briefly go to the end stop as a functionality
check.
Tachometer
Indicates engine speed.
Warning zone: Maximum permissible
engine spe ed e xce ed ed; danger to e ngine.
Speedometer
Speed d isplay .
Picture no:
Mil ea ge / k ilometre di sp lay
If the ignition is off, the mileage is
displayed for approx. 15 seconds b y briefly
pressing the reset knob.
Top line:
Trip odometer
Display of miles / kilom etres covered since
last reset.
To reset, hold the reset knob depressed
for a few seconds when the ignition is
switched on.
Bottom line:
Odometer
Records the miles / kilometres driven.
Maintenance, Inspection system -
see pages 91, 226.
90 Instruments, Controls
Picture no: 17906s.tif
Coola nt temperat ure display
For physical reasons, the engine
temperature gauge shows the coolant
temperature only if the coolant level is
adequate.
During operation, the system is
pressurised. The tem perature may
therefore rise briefly to ov er 100 ° C.
Picture no: 17907s.tif
Fuel gauge
Never run the tank dry!
Diesel engines: If the tank is run dry, bleed
the fue l sy ste m as de sc rib ed on pag e 17 0.
Because of the fuel remaining in the tank,
the amount of fuel required to fill the tank
may be less than the specified tank
capacity.
Pointer in zone at
left
= Engine operating
temperature not y et
reached.
Pointer between
the zones
= Normal operating
temperature.
Pointer in zone at
right
(warning zone)
= Temperature too
high :
Stop vehicle and
switch off engine.
Danger to engine.
Check coolant level,
see page 231.
Pointer in red
warning
zone or Y
illuminated
= Reserve level.
Pointer in red
warning
zone or Y
flashing
= Refuel imme diately
see page 143.
91In struments, Controls
Picture no: 17901s.tif
Servi ce display 3
When the indicator in the display of the
odometer app ears, mak e a Service
appointment with a workshop as soon as
possible.
Maintenance, Inspection system -
see page 226.
Picture no: 17878s.tif
Tr an sm is si on dis play 3
Display of current gear or mode with
Easytronic 3.
Easytronic 3 - see page 132.
R Reverse gear.
N Neutral.
A Automatic mode of Easytronic.
1-5 Manual mode, current gear of
Easytronic.
92 Instruments, Controls
Picture no: 17913s.tif
Information display
Triple Information Display 3
Display of time, outside temperature and
date / Infotainment system (when it is on).
When the ignition is off, the time, date and
outside temperature can be made to
appear for approx. 15 seconds by briefly
pressing one of the two buttons adjacent
to the display.
An F in the display indicates a fault.
Hav e the cause eliminated by a workshop.
Picture no: 16719t.tif
Graphica l Informa tion Display 3,
Colour Inform ation Displ ay 3
Display of time, outside temperature and
date / Infotainment system (when it is on).
The Graphical Information Display
presents the information in monochrome.
The Colour Information Display presents
the inform ation in c olour.
The information that is displayed depend s
on the Infotainment system configuration.
Some information app ears in the display in
an abbreviated form.
For Infotainment system, see Infotainment
system operating instructions.
An F in the display indicates a fault.
Have the cause eliminated by a workshop .
12:01 17,0°C
FM 3 90,6MHz
REG AS RDS TP
Ü Board Computer 19,5° 19:36
BC 1 All values
BC 2
257.0 miles
Timer
Ø40mph
7.0 ga l s
Ø 31.0 mpg
1
11
1
8
88
8
93In struments, Controls
Picture no: 17913s.tif
Outside temperature
A fall in temperature is indicated
immediately and a rise in temperature
after a time delay.
If the external temperature falls to 3 °C, to
warn of ice on the road the symbol :
appears in the Triple Informa tion Display.
When the temperature climbs, the
symbol : goes out above 5 °C.
Picture no: 16707t.tif
In vehicles with Graphical Information
Display 3 or Colour Information Display 3,
an icy road surface warning message
appears in the display.
No me ssage is disp la yed if the
temperature is less than -5 °C.
:
8:56 -5,5°C
07.04.2004
Slippery road
-2,5°C
OK
9 Warning
Caution: The road surface may already
be icy , ev en though the display ind ic ates
a few degrees above 0 °C.
94 Instruments, Controls
Picture no: 17914s.tif
Triple Information Display
Set d ate and ti me
With Infotainment system off,
press Ö and ; next to the display as
follows:
Correcting time:
Some RDS transmitters do not send a
correct time sig nal. If the incorrect time is
displayed on frequent occasions,
deactivate autom atic time synchronisation
see next column, and set the time
manually.
The automatic setting is indicated by } in
the display.
Deactivating / activating automatic time
synchronisation: With Infotainment system
off, press Ö and ; n ext to the dis play:
Press Ö for approx. 2 seconds:
Day flashes
;:Set day
Ö:Month flashes
;:Set month
Ö:Year flashes
;:Set year
Ö:Hours flash
;:Set hours
Ö: Minutes flash
;: Set minutes
Ö:Clock is started.
8:56 5,5°C
07.04.2004
Hold down Ö for a pprox. 2 sec., cloc k
display is now in setting mode,
Press Ö twice (until year flashes).
Press Ö and hold down for approx.
3seconds until} flashe s in display 3
and text "RDS TIME" appears (years
flash during this time),
Press ;; display shows:
RDS TIME 0 = Off
Press ;; display shows:
RDS TIME 1 = On
Press Ö three times.
95In struments, Controls
Picture no: 16711t.tif
Graphical Information Display 3
or Colour Information Display 3,
selecting functions
Functions and their menus are shown in the
Graphical Information Display and Colour
Information Display.
These functions are highlighted or
executed in the m enu display v ia the
four-wa y b utton, the m ulti-func tion knob 3
on the Infotainment System or the remote
control buttons 3 on the steering wheel.
Picture no: 15593t.tif
To select w ith four-wa y button
Select menu items via menus and with the
buttons / four-way button of the
Infotainme nt sy ste m.
Picture no: 15559t.tif
Selecti on with the mul ti-function knob 3
Turn:
Highlighting of menu options or
commands, selection of function ranges.
Press:
Selection of highlighting, confirmation of
commands.
To exit a menu, turn the multi-function
knob left or right to Return or Main and
select.
6
FM AS [TP] REG C Din MP3
90.6
MHz
19, 19:36
96 Instruments, Controls
Picture no: 14034s.tif
Selection using rem ot e c ontrol butt ons 3
on steering wheel
Select menu options via menus and with
the buttons.
Picture no: 16711t.tif
For each functional area, there is a main
page (Main), which is selected at the top
edge of the display (not with the
Infotainment system CD 30 without the
hands-free mobile phone system):
z Audio,
z Navigation 3,
z Telephone 3,
z Trip computer 3.
Function areas audio, navigation 3 and
telephone 3 see Infotainme nt sy ste m
op erating instructions.
Picture no: 16712t.tif
System settings
The settings are accessed via the Setting s
menu.
Press the Main button 3 (not found on all
Infotainment systems) on the Infotainm ent
system (call up main display).
Press the Settings button on the
Infotainment system. For Infotainment
system CD 30, no menu may be selected.
The Settings m enu is displayed.
FM AS [TP] REG CDin MP3
90.6
MHz
19, 19:36
7
77
7 Settings 19,5° 19:36
Time, Date 19:36
Language
Units 10 . 07 . 2004
Contrast
Day / Night
6
66
6 Ign. logic
97In struments, Controls
Picture no: 16713t.tif
Setti ng the date and time 3
Select menu item Time, Date from the
Setti ng s menu.
The menu for Time, Date is displayed.
Select the menu items required.
Make the desired setting.
Correcting time:
Some RDS transmitters
1)
do not send
correct time sig nals. If the incorrect time is
frequently displayed, deactivate
automatic time synchronisation and set the
time manually.
To correct tim e with the help of RDS, select
menu item Synchron. clock autom atica l.
from the Time, Da te menu.
The box in front of Synchron. clock
automat ical. will be ticked – see
Fig. 16713 T.
Picture no: 16714t.tif
Language selection
You can select the display language for
some functions.
Select menu item Language from the
Sett ings menu.
The available languages are displayed.
6
7
77
7 Time, Date 19,5° 19:36
Time 19:36
Date 10 . 07 . 2004
6
66
6 Synchron. clock automatical.
1)
RDS = Rad io Dat a S ys te m.
7
77
7 Settings 19,5° 19:36
Time, Date
Language Deutsch
Units English
Contrast Español
Day / Night ...
6
66
6 Ign. logic
98 Instruments, Controls
Picture no: 16715t.tif
Select the desired language.
Selections are indicated by a 6 in front of
the menu item .
In systems with voice output 3, w hen the
language setting of the d isplay is change d,
the system will ask whether the
announcement language should also be
changed see Infotainment system
operating instructions.
Picture no: 16716t.tif
Setting units of measure
You can select which units of measure are
to be used.
Select menu item Units from the Settings
menu.
The available units are displayed.
Select the desired unit.
Selections are indicated by a o in front of
the menu item.
Picture no: 16717t.tif
Ad just ing con tra st 3
(Graphical Inform ation Displ ay)
Select menu item Cont rast from the
Sett ings menu.
The menu for Contr ast is displayed.
Confirm the required setting.
7
77
7 13 Languages 19,5° 19:36
X Deutsch
English
Español
Nederlands
Français
Italiano
7
77
7 Settings 19,5° 19:36
Time, Date
Language
~ Europe-SI
Units
| Japan
Contrast
| Great Britain
Day / Night
| USA
6
66
6 Ign. logic
7
77
7 Contrast 19,5° 19:36
12
99In struments, Controls
Setti ng displa y ill um inati on 3
The display can be adjusted to suit the
lighting conditions, black or coloured text
on a light background or white or coloured
text on a dark background.
Select menu item Day / Night from the
Setti ng s menu.
The options are displayed.
Autom atic:
Adapted based on vehicle lighting.
Alw ays da y design:
Black or coloured text on light background.
Alw ays night design:
White or coloured text on dark
background.
Selections are indicated by a o in front of
the menu item .
Ig ni tion logic 3
Se e Infotainme nt sy ste m ope ra ting
instructions.
Picture no: 16719t.tif
Graphical Information Display 3
or Colour Information Display 3,
trip computer 3
The trip computers provide information on
driving data, which is continually recorded
and evaluated electronically.
The on-board computer main page gives
information on range, instantaneous
consumption and average consumption 3.
To display the other trip computer driving
information, press BC button on
Infotainme nt sy ste m 3 or select trip
computer menu on display.
For vehicles with Infotainment
System CD 30 3 and steering wheel rem ote
control 3 , the left-hand steering wheel
buttons only operate the trip computer.
Picture no: 16710t.tif
Range
Range is calculated from current fuel tank
content and instantaneous consumption.
The display shows average values.
When the vehicle has been refuelle d, the
range is updated automatically after a
brief delay.
Ü Board Computer 19,5° 19:36
BC 1 All values
BC 2
257.0 miles
Timer
Ø40mph
7.0 ga l s
Ø 31.0 mpg
1
11
1
8
88
8
Ra ng e
257
miles
Inst. Consumpt.
31
mpg
Aver . Cons ump.
31
mpg
19, 19:36
100 Instruments, Controls
Picture no: 16718t.tif
If less than 30 miles (50 km) can be driven
with the fuel remaining in the tank, the
warning "Range" appears on the display.
If less than 20 miles (30 km) can be driven
with the fuel remaining in the tank, the
warning "Please refuel!" 3 appears on the
display.
Acknowledge the menu item as described
on page 95.
Instantaneous consumption
Display changes depending on speed:
Distance travelled
Display of miles / kilometres travelled.
The measurement can be reset to zero at
any time and restarted, see next colum n.
Average speed
Calculation of average speed.
The measurement can be reset to zero at
any time and restarted, see next colum n.
Stoppages in the journey with the ignition
off are not included in the calculations.
Effective consumption
Display of fuel used.
The measurement can be reset to zero at
any time and restarted, see next colum n.
Average consumption
Calculation of average consumption.
The measurement can be reset to zero at
any time and restarted, see next colum n.
Picture no: 16719t.tif
Reset trip computer inform ation
The following trip computer information
can be reset (restart measurements):
z Distance travelled,
z Average speed,
z Effective consumption,
z Average consumption.
Select BC 1 or BC 2 from the trip computer
menu.
Display in gal/h below 8 mph
(13 km/h),
Display in mpg above 8 m ph
(13 km/h).
Range
23 miles
OK
Ü Board Computer 19,5° 19:36
BC 1 All values
BC 2
257.0 miles
Timer
Ø40mph
7.0 ga l s
Ø 31.0 mpg
1
11
1
8
88
8
101In struments, Controls
Picture no: 16720t.tif
The information of both trip computers can
be re set separately and therefore p rov id es
a facility for evaluating information over
different time periods.
Select the desired trip computer
information.
The v alue for the selecte d function will b e
reset and recalculated.
Picture no: 16721t.tif
To reset all trip computer information,
select m enu item All v alues.
After resetting, "- - -" is displayed with the
trip computer information selected. The
recalculated values are displayed after a
brief delay.
Interruption of power supply
If the power supply has been interrupted or
if the battery voltage has dropped too low,
the values stored in the trip computer will
be lost.
Ü Reset BC 1 19,5° 19:36
All values
257.0 m iles
Ø40mph
7.0 gals
Ø 31.0 mpg
Ü Reset BC 1 19,5° 19:36
All values
257.0 m iles
Ø40mph
7.0 gals
Ø 31.0 mpg
102 Instruments, Controls
Picture no: 16722t.tif
Stop watch
Select menu item Timer from the Board
Com puter menu.
The Timer menu is displayed.
To start, select menu item St art.
To reset, select menu item Reset.
The stop watch information to be
displayed can be selected via menu
Opt ions 3:
Dr iving Ti me excl. S tops
Measurement of the time the vehicle is in
motion. Stationary time is not included.
Dr iving Ti me incl. S tops
Measurement of the time the vehicle is in
motion. The time the vehicle is stationary
with the key in the starter sw itch is
included.
Tr ave l T ime
Measurement of the time from manual
activation via Start to manual deactivation
via Reset.
Ü Board Computer 19,5° 19:36
BC 1
BC 2
00:00:00
Timer
Start
Reset
Options
103In struments, Controls
Warning buzzers
When starting the engine or while driving:
z if se at b e lt is n o t fas t en ed 3,
z if a specified maximum speed is
exce ed ed 3,
z for E asytro nic 3 - if A, M or R is selected
while the engine is running and the
driver’s door is opened b ut the footbrak e
is not applied.
When the vehicle is parked and the drivers
door is opened:
z with the ke y in the ig nitio n ,
z with parking lights or dipped beam
switched on,
z if the turn signal stalk is engaged.
Picture no: 14055h.tif
Windscreen wiper
To activate, press stalk briefly up wards
Ad just able wi per interval
Setting wiper interval to a value between
2 and 15 seconds:
Sta lk to timed interval wipe position $,
stalk to § ,
wait for desired interval time,
push stalk back to timed interval wipe
position $.
The interval time selected remains stored
until it is next changed or until the ignition
is turned off.
After turning on the ignition and setting the
lever to timed interval wipe position $, the
interval is set to 7 seconds.
§ =Off
$ = Adjustable timed interval wipe
% =Slow
& =Fast
104 Instruments, Controls
Picture no: 14056h.tif
Windscreen wash system and
headlight wash system 3
To activate, pull stalk towards steering
wheel.
The wiper will swipe for a few strokes.
The headlight wash system 3 can be
operated when the lights are on.
Picture no: 14057h.tif
Rear wind ow wash and wiper
system
To activate, push stalk forwards.
The rear window wiper swipes in timed
interval mode.
To deactivate, pull stalk tow ards steering
wheel.
If the stalk is held forwards, the rear
window wash is engaged for the duration
of activation.
The wiper will swipe for a few strokes when
washing.
105Lighting
Lighting
Picture no: 14756s.tif
Exterior lights
Turn light switch:
In positions 8 and 9, the tail lights and
numb er plate lights are also on.
If the ignition is switched off with the
dipped bea m or main b eam on, the
parking lights illuminate 3.
Vehicles with daytime running lights 3:
With the ignition on and the light
switch on 7, dipped beam without
instrument illum ination is on.
The daytime running lights switch off when
the ignition is switched off.
Follow the regulations of the country in
which you are driving w hen using daytime
running lights and fog lights 3.
Driving ab road see page 113.
Exterior lights .................... ......... .......... 105
Main beam, headlight flash . .............. 106
Turn signal lights ........................... ...... 106
Front fog lights > 3.............. .............. 106
Fog tail light r ...................... .............. 107
Haza rd warning lights......................... 107
Headlight range adjustment ? .... ...... 107
Adaptive Forw ard Lighting (AFL) 3 . 109
Door-to-door lighting function 3 ...... . 110
Activating the exterior lighting w ith
the remote control 3........... ............. . 110
Instrument illumination k,
Informa tion display illumination ...... 111
Courtesy lig ht ........... .............. .............. 111
Battery discharge protection 3.......... 113
Light covers. ............................... .......... 113
Headlights w hen driving abroad . ...... 113
7 =Off
8 = Parking lights
9 = Dip ped beam
or main bea m
106 Lighting
Picture no: 18475s.tif
Main beam, headlight flash
To switch from d ipped to main beam , push
stalk forwards.
To switch to dipped beam, push stalk
forwards again.
To activate the headlight flash, pull stalk
towards steering wheel. Main beam is
engaged for the duration of activation.
When the main beam or headlight flash is
activated, the blue control indicator C
lights.
Picture no: 14054h.tif
Turn signal lights
To activate, push stalk up or down.
If the stalk is moved past the resistance
point, the turn signal light remains on.
When the steering wheel moves back
towards the straight-ahead position, the
turn signal light is automatically
deactivated.
Brief flash: Push stalk to resistance point
and release.
Picture no: 14758s.tif
Front fog lights > 3
The front fog lights can only be switched on
when both the ignition and the headlights
are on.
Stalk up = Right turn signal light
Stalk down = Left turn signa l light
On = Press >, > illuminates in
instrument cluster.
Off = Press > again or switch off
ignition or headlights.
107Lighting
Fog tail light r
The fog tail light can only be switched
on when b oth the ignition and the
dipped beam / parking lights are on.
The fog tail light on the vehicle is
deactivated when towing a caravan /
trailer.
Re v ers in g lights
Illuminate when reverse gear is engaged
and the ignition is switched on.
Picture no: 14303s.tif
Hazard warning lights
To activate, press button ¨.
To deactivate, press button ¨ again.
To aid location of the pushbutton, the red
surface is illuminated when the ignition is
switched on. When the button is pressed,
its control indicator flashes in time with the
ha zard warning lights.
Picture no: 14757s.tif
Headlight range adjustment ?
Manual hea dlight range adjustment
With dipped beam switched on, adjust
headlight range in four steps to suit vehicle
load. Push to release knob and turn it
against resistance to the required position.
On = Press r, r illuminates in
instrument cluster.
Off = Press r again or switch off
ignition or dipped beam /
parking lights.
108 Lighting
Correct adjustment of the headlight range
reduces dazzle for other road users.
Automatic headlight range adjustment 3
On vehicles with Xenon headlights,
headlight range is adjusted automatically
based on vehicle load.
Front seats occupied = 0
All seats occupied = 1
All seats occupied and
luggage compartment
load = 2
Drivers seat occupied
and luggage
compartment load = 3
109Lighting
Picture no: 15209j.tif
Adaptive Forward Lighting
(AFL) 3
AFL improves illumination of:
z Curves (curve lighting),
z Intersections and tight turns
(turn lighting).
Curv e lighting (1)
The light b eam pivots based on steering
wheel position and speed (from approx.
6 mph (10 km/h)).
The headlights shine at an angle of up
to 15° to the right or left of the direction of
travel.
Picture no:
Turn l ightin g (2 )
An additional light illuminates at certain
steering wheel positions (after
approx. 90°), turn signal settings and
speeds (up to approx. 25 mph (40 km/h)).
The light shines approx. 90° to the left or
right of the vehicle and approx. 30 metres
to the front.
Reverse function
Turning the headlights on, selecting
reverse gear and switching a turn signal
light on causes the turn lighting to be
switched on for the respective side.
When the turn signal is switched off, the
turn lighting continues to illuminate for
approx. 15 seconds.
Picture no: 17887s.tif
C ontrol indic ator B for adap tive driving
lig hts
Illuminated: Fault in system.
The syste m is not ready for operation.
Contact a workshop.
The steering angle sensor must be
calibrated after a power supply
interruption, in order to make the system
operational. See page 150.
If the control indicator B flashes for
approx. 4 seconds after the ignition is
switched on, this is a reminder that the
headlights have been set to symmetrical
dipped b eam; see "Headlights when
driving abroad" on pag e 113.
110 Lighting
Picture no: 14302s.tif
Door-to-door lighting function 3
The dipped beam illum inates for approx.
30 seconds after leaving the vehicle and
closing the driver’s door.
To activate:
1. Switch off ignition.
2. Remove ignition key.
3. Open driver’s door.
4. Pull turn sig nal stalk tow ards ste ering
wheel.
5. Close driver’s door.
If the drivers door is left open, the lights will
go out after approx. two minutes.
The light goes out immediately if the
ignition key is inserted in the starter switch
or the turn signal stalk is moved a gain.
Picture no: 17920S.tif
Activating the exterior lighting
with the remote control 3
The welcome light function engages the
dipped b eam for a pprox. 30 seconds.
This feature must be activated (once):
Unlock the vehicle, put the ignition key in
the starter switch and press the light switch
for approx. 5 seconds - see Fig. 14136 S on
next page.
To deactivate the function, contact a
workshop.
111Lighting
To activate the welcome light function,
press button q on the remote control
twice, with the vehicle locked.
Country-specific version 3:
To enable the welcome light function, press
button q on the remote control once, with
the vehicle loc ked.
This feature is deactivated im mediately by
pressing button p on the remote control or
by switching on the ignition.
Picture no: 14759s.tif
Instrument illumination k,
Information display illumination
Illuminates when ignition is switched on.
Brightness can be adjusted when the
exterior lights are on:
Push to release kn ob k and then turn it
clockwise or anticlockwise and hold until
the desired brightness is obtained.
Display illum ination 3 – see page 99.
Picture no: 14136s.tif
Courtesy light
Autom atic interior light
Illuminates automatically when the vehicle
is unlocked with the remote control or when
a door is opened.
Goes off automatically after a delay when
the doors are closed or immediately when
the ignition is switched on or the doors are
locked.
Front courtesy l ight
Manual operation from inside, with doors
closed:
On = Press light switch 0
Off = Press light switch 0 again
112 Lighting
Picture no: 11607s.tif
Front reading l ights 3
Left and right reading lights are
individually operable. With ignition on:
Picture no: 12344t.tif
Courtesy lights,
rear reading lights 3
Ce ntre sw itc h position:
The rear courtesy light illuminates together
with the front courtesy lights when a door is
op ened.
The rear reading lights on the left and right
can be switched on separately.
With ignition on:
Entry l ighting 3
After unlocking the vehicle, the instrument
panel and switch lighting p lus the courtesy
lights illuminate for a few seconds.
Illuminated mirror i n the sunvisors 3
The lig hting switches on when the cove r is
opened.
Glov e c ompar tment lig ht ing
Illuminates when ignition is on and the
glove compartment lid is opened.
Cigarette lig hter
and ashtray illumi na tion 3
Illuminates when ignition is switched on.
Luggag e compart ment lighting
Illuminates when the luggage
compa rtm ent is opened.
Autom atica lly reg ul ated centre console
lig hting 3
Spotlight in housing of interior mirror.
Daylight-dependent, automatically
regulated centre console lighting with
ignition switched on.
On = Press button
Off = Press button again
On = Switch position I
Off = Switch position 0
113Lighting
Battery discharge protection 3
Some consumers, such as the interior
lighting switch them se lves off after ap prox.
30 minutes if the ignition is off, in order to
protect the battery charge.
Light covers
The inside of the light covers may briefly
mist up under unfavourable wet / cold
weather conditions, during heavy rain or
after the ve hic le has been washed. The
misting disa ppears of its own accord after
a short time, but can be accelerated by
switching on the lights.
Headlights when driving abroad
The asymmetrical dipped beam increases
the field of vision on the passengers side of
the lane.
This causes glare for oncom ing traffic if the
vehicle is driven in countries where traffic
drives on the opposite side of the road.
Do as follows to prevent glare:
Vehicle s wit h
Halogen headlig ht system or
Xenon headlight system 3
Have a workshop convert the headlights.
Vehicles with Adaptive Forward
Lighting (AFL) 3
1. Pull stalk for main beam towards
steering wheel and hold
(headlight flash).
2. Sw itch on ignition.
3. After approx. 3 seconds, an acoustic
signal sounds and the AFL control
indicator B flashes for approx.
4seconds.
After the change, AFL control indicator B
flashes for approx. 4 seconds each time the
ignition is switc hed on.
To return to asymmetrica l dipped beam,
pull the main beam stalk tow ards the
steering wheel again and hold, switch on
the ignition and wait for the acoustic
signal. AFL control indica tor B will then
discontinue flashing.
Control indica tor B see page 109.
114 Infotainment System
Infotainment System
Radio reception 3
Vehicle radio reception differs from
domestic radio reception:
As the vehicle antenna is relatively near the
ground, the broadcasting companies
cannot guarantee the same quality of
reception as obtained with a dom estic
radio using an overhead antenna.
z Changes in distance from the
transmitter,
z multi-path reception due to reflection
and
z shadowing
may cause hissing, noise, distortion or loss
of reception altogether.
Infotainment system 3
The Infotainment system is operated as
described in the operating instructions.
Picture no: 14034s.tif
Remote control on steering
wheel 3
The functions of the Infotainment system 3
and the informa tion display can be
operated via the buttons on the steering
wheel.
Further information – see page 96 and the
relevant operating instructions.
Radio reception 3.... ............................ 114
Infotainment system 3 ........................ 114
Remote control on steering wheel 3.. 114
Twin Audio 3 ........... ............................ 115
AUX input 3 ............................... .......... 115
Electronic data acquisition in toll
sy ste ms 3.................... ....................... 115
Mobile telephones and radio
equipment 3.......... ............................ 116
115Infotainment System
Picture no: 14035s.tif
Twin Audio 3
Twin Audio provides rear seat occupa nts
with the opportunity to listen to a different
audio source than the one selected by the
driver on the Infotainment system.
Only an audio source that is not currently
active on the Infotainment system can be
controlled using Twin Audio.
Two headphone connections are availab le ,
with separate volume controls.
Further information is available in the
Infotainment system operating
instructions.
Picture no: 18473s.tif
AUX inpu t 3
The AUX input is next to the handbrake in
the centre console.
An externa l audio source, e.g. a portable
CD player, can be connected via the AUX
input.
Always keep the AUX input clean and dry.
Further inform ation is available in the
Infotainme nt sy ste m ope ra ting
instructions.
Picture no: 14033s.tif
Electronic data acquisition in toll
systems 3
In vehicles with a heat-reflecting
windscreen 3
1)
, attach chipcard 3 for
electronic data acquisition and fee
payment in b lack area of windscreen on
left or right-hand side, behind the interior
mirror. See markings in illustration.
Attaching the chipcard outside this area
may cause data acquisition malfunctions.
1)
Solar Reflect.
116 Infotainment System
Mobile telephones and radio
equipment 3
The Vauxhall installation instructions and
the operating guidelines provided by the
telephone manufa cturer must be observed
when fitting and operating a mob ile
telephone. Failure to do so could invalidate
the vehicles ope rating pe rm it (EU Directiv e
95/54/EG).
Recommended conditions for fault-free
operation:
z Professionally installed exterior antenna
to ob ta in th e max imu m range poss ible.
z Maximum transmission power 10 Watt.
z Installation of the te lephone in a suitab le
spot (see information on page 75).
Obtain advice on pred eterm ined
installation locations for the external
antenna and equipment holder and ways
of using devices with transmission power of
more than 10 Watts.
We recommend that you consult your
Vauxhall Authorised Repairer, who will
have brackets and various installation kits
availab le as accessories and will install
them in accordance with regulations.
Operation of a hands-free device without
external antenna, with mobile phone
standard GSM 900/1800/1900 and UMTS,
is permitted only if the maximum
transmission power of the phone does not
exceed 2 Watt for GSM 900 and otherwise
1 Watt. The instructions of the
manufacturer of the telephone and
ha nds-free device must b e observ ed in all
cases.
For reasons of safety, we recommend that
you do not use the phone while driving.
Even use of a hands-free set can be a
distraction while driving. Be sure to observe
any country-specific reg ulations.
9 Warning
Mobile phones and radios can cause
malfunctions of the vehicle electronics
when operated inside the vehicle without
an external antenna, unless the
instructions above are observed.
Mobile phones which do not comply with
the above standards, and rad ios, may
only be used with antennae installed on
the outside of the vehicle.
117Climate Control
Climate Control
Picture no: 14154s.tif
Heating and ventilation system,
air conditioning system 3
Ventilation, heating and cooling 3 are
combined into one unit that is designed to
provide com fort regardless of the season,
weather or outside temperature.
When cooling 3 is activated, the air is
cooled and dried.
The heating unit heats the air as required in
all operating mod es depending on the
position of the temperature switch.
The air supply can be adjusted to suit
requirements by means of the fan.
The buttons for cooling n and a ir
re cir cu la tion 4 are only found on m odel
variants with air conditioning system 3.
Air conditioning system 3 - see page 123.
Picture no: 16499s.tif
Electronic Climate Control
system 3
Offers the greatest comfort in the vehicle
interior regardless of the conditions
outside.
To ensure a uniform and comfortable
climate in the vehicle, the temperature of
inflowing air, airflow rate and air
distribution are automatically adapted
based on the climate conditions outside
the vehicle and the current temperature of
the vehicle interior.
Electronic Climate Control system 3 -
see page 126.
Heating and ventilation system, air
conditioning system 3 ...................... 117
Electronic Climate Control system 3 .. 117
Air vents .......... ............................... ...... 118
Heated rear window, heated exterior
mirrors 3 ... ............. ............................ 119
Heated seats 3 ............. ....................... 119
Cooled glove compartment 3 ...... ...... 119
Heating and ventila tion system ... ...... 120
Air conditioning system 3.................. . 123
Electronic Climate Control system 3 .. 126
Air intake ......... .............. ....................... 131
Air outlet.. ........ ............................... ...... 131
Pollen filter ............................. ............. . 131
Note ...................... ............. ................... 131
Maintenance ............ .............. .............. 131
118 Climate Control
Picture no: 16112s.tif
Air vents
Pleasant ventilation to the head area
controlled by the position of the
tem perature switch.
To increase the air supply, turn the fan all
the way up and set the air distribution
switch to M or L.
Centre and side (1) air vents
To open air vent:
Turn vertical adjuster wheel up.
Adjust the direction of airflow by turning
the horizontal and vertical adjuster wheels.
Picture no: 14576s.tif
To close the air vents, turn the adjustment
wheel fully downwards.
Wind sc reen defroster nozzles (2)
Air distribution switch set to V or J:
Air is directed onto the windscreen and
do or wind ow s.
Additional vents
Located beneath the windscreen and side
windows and in the front footwell.
119Climate Control
Picture no: 13992s.tif
Heated rear window,
heated exterior mirrors 3
With the ignition on, the rear window and
exterior mirror heating is switched on by
pressing button Ü:
LED Ü illuminated:
rear window and exterior mirror heating.
LED Ü not illuminated: rear window and
exterior mirror heating is switched off.
Heating works with the engine running and
is switched off automatically after approx.
15 minutes.
Depending on engine, cleaning the diesel
particle filter 3 automatically switches on
the heated rear window.
Picture no: 14153s.tif
Heated seats 3
Two pushbuttons ß between the centre air
vents.
When the ignition is switched on, the seat
heating is activated by pushing the
button ß:
LED illumina ted: seat heating on.
LED not illuminated: seat heating off.
Picture no: 14320s.tif
Cooled glove compartment 3
Cool air is routed to the glove
compartm ent.
If glove compartment cooling is not
required, slide cover downwards.
G eneral in forma tion a nd
information on air intake,
air outlet, pollen filter and
maintenance,
see page 131.
120 Climate Control
Picture no: 14144s.tif
Heating and ventilation system
Left -hand rota ry knob : Temperature
Picture no: 14145s.tif
Centre rotary knob: Quantity of a ir
Four fan speeds:
The rate of airflow is determined by the
fan. The fan should therefore also be
switched on du ring a jou rne y.
Picture no: 14146s.tif
Rig ht-hand rot ary knob: Air distribut ion
Open the air vents when the switch is
set to L or M.
Red area = Warm
Blue area = Cold
x Off
4 Maximum rate of airflow
V Towa rd s w in ds creen an d
front door windows
J Towa rd s w in ds creen ,
front door windows and footwell
K Towards footwell
L Towa rds head area and footwell
M Towa rds head area
121Climate Control
Picture no: 14150s.tif
Vent ilation
z Set the temperature to the desired
se tting,
z Switch fan on, adjust fan setting as
desired,
z For maximum ventilation in head area:
set air distribution switch to M and open
all air vents,
z For ventilation to footwell:
Set air distribution switch to K,
z For simultaneous ventilation to the head
area and the footwell:
Set air distribution switch to L.
Hea ting
The amount of heat is dependent on the
coolant temperature and is thus not fully
attained until the engine is warm.
For rapid warming of the passenger
compartment:
z Turn the temperature switch clockwise as
far as it will g o.
z Set the fan to speed 3.
z Set air distribution switch to desired
position, preferably position J,
see page 120.
Vehicles with Quickheat 3:
Depending on the outside temperature
and the engine temperature, the
passenge r com partment is heated up more
quic kly using an auxiliary electric heater.
The auxiliary electric heater switches itself
on a uto ma tica lly .
The comfort and general well-being of the
vehicle occupants are to a large extent
dependent on a suitable ventilation a nd
heating setting.
To achieve stratification of temperature
with a pleasant "cool head and warm feet"
effect, set the rotary air distribution
switch to K, J or L, set temperature
rotary knob to any position (in centre range
with temperature stratification effect).
122 Climate Control
Picture no: 14151s.tif
Heating the footwell
z Set the temperature switch to the
re d zo n e .
z Switch on fan.
z Set air distribution switch to K.
Picture no: 16481s.tif
Dem isting and defrost ing wind ow s
Miste d or icy windows, such as in dam p
weather, from wet clothes or when outside
temperatures are low:
z Turn the temperature switch clockwise as
far as it will g o (warm).
z Set fan to 3 or 4.
z Set air distribution switch to V.
z Switch on heated rear window Ü.
z Open sid e air vents as required and
direct them towards door windows.
z For simultaneous footwell heating, set
air distribution switch to J.
9 Warning
Disregard of these instructions could lead
to misting or icing of the windows and
subsequent accidents due to impaired
visibility.
123Climate Control
Air conditioning system 3
As a supplement to the heating and
ventilation system, the air conditioning
system cools and dehumidifies (dries)
inflowing air.
If cooling or dehumidification is not
desired, switch off cooling in order to save
fuel.
Cooling switches off automatically at low
outside temperatures.
Picture no: 14159s.tif
Cooling n
Operation only if engine is running and fan
is switched on:
Control indicator in the button.
When cooling (air conditioning
compressor) is active, the air is cooled and
dehumidified. If cooling or
dehumidification is not desired, switch off
cooling in order to save fuel.
Cooling switches off automatically at low
outside temperatures.
Picture no: 14158s.tif
Air recirculation system 4
The air recirculation button 4 is used to
set the ventilation system to air
recirculation mode (control indicator in
button).
If f ume s or unpleasa nt od ours pe ne trate
from outside: Temporarily switch on air
recirculation system 4.
To increase the cooling power at high
outside temperatures, temporarily switch
on the air recirculation system.
6
On = Press n
Off = Press n again
124 Climate Control
The air recirculation system minimises the
entry of outside air and the air in the
passenger com partment is recirculated.
The humidity increases, and the windows
can mist up. The quality of the passenger
compartment air deteriorates which may
cause the vehicle occupants to feel drowsy.
Air distribution to V:
The air recirculation system is
automatically switched off, to speed up
window demisting and prevent fogging.
Picture no: 14160s.tif
Comfort sett ing
z Set cooling n as desired.
z Air recirculation system 4 off.
z Set temperature switch a s desired.
z Switch on fan to desired speed.
z Set air distribution switch to M or L .
z Open or adjust air vents as required.
Temperature switch in centre of
adjustment range: warmer air will flow into
the footwell and cooler air into the upper
zone, with warm er air coming from the side
air vents and cooler air from the centre air
vents.
Picture no: 14162s.tif
Ma xim um cooling
Briefly open windows, sunroof and tilting
roof 3 so that warm air can escape quic kly.
z Cooling n on.
z Air recirculation system 4 on.
z Turn the temp erature switch
anticlockwise as far as it will go (c old).
z Set fan to 4.
z Set air distribution switch to M.
z Open all air vents.
125Climate Control
Picture no: 16482s.tif
Demisting a nd defrosting w indows
Misted or icy windows, such as in damp
weather, from wet clothes or when outside
tem peratures are low:
z Cooling n on,
the air conditioning compressor
deactivates automatically when outside
te mperatures are low (icing),
z Turn the temperature switch clockwise,
z Set fan to 3 or 4,
z Air distribution switch to V;
air recirculation system 4
automatically switches off,
– or –
if there is still moisture in the system after
previous air conditioning operation, the
windows may mist up. To prevent this,
set air distribution to K before starting
engine and set to V approx. 5 seconds
after starting,
z Activate heated rear window Ü,
z Open side air vents as required and
direct them towards the side windows.
9 Wa rning
Disregard of these instructions could lead
to misting or icing of the windows and
subsequent accidents due to impaired
visibility.
126 Climate Control
Electronic Climate Control
system 3
Provides the greatest amount of comfort in
the interior regardless of the weather,
outside temperature or season.
To ensure a constant and comfortable
climate in the v ehicle, the tempera ture of
the inflowing air, the airflow rate and the
air distribution are changed automatically
according to clim atic conditions outside
the vehicle.
The clim ate is regulated automatically
based on personal settings.
Picture no: 16500s.tif
Temperature changes due to external
influences, such as direct sunlight, are
autom atically compensated.
When cooling (air conditioning
compressor) is active, air is cooled and
dehumidified.
The pollen filter removes dust, soot, pollen
and spores from the inflowing outside air.
Picture no:
When set to automatic mode, the
Electronic Climate Control system provides
the optimal settings for almost all
conditions. If necessary, settings can be
modified manually.
The Elec tronic Climate Control system is
only operational when the engine is
running.
Cooling (air conditioning compressor)
switches off automatically at low outside
temperatures.
127Climate Control
Picture no: 16496s.tif
Autom atic m ode
Basic setting for maximum comfort:
z Press AUTO button.
z Open all air vents.
z Air conditioning compressor activation
see page 129.
z Preset temperature to 22 °C with rotary
knob.
The temp erature can be set highe r or low er
as desired.
Switching off the air conditioning
compressor (ECO appears in displa y) can
ha ve a detrimental effect on comfort and
safe ty see p age 129.
All air vents are actuated automatically in
automatic mode. The air vents should
therefore always be open see page 118.
Tempe rat ur e p res et
The left rotary knob can be used to set the
temperature to values of between 16 °C
and 28 °C.
For the sake of comfort, only change the
preselected te mperature in sm all ste ps.
Vehicles with Quickheat 3:
Depending on the outside temperature
and the engine temperature, the
passenger compartme nt is heated up more
quickly using an auxiliary electric heater.
The auxiliary e lectric heater switches itself
on automatically.
If the temperature setting is less
than 16 °C, LO appears in the air
conditioning display: The Electronic
Climate Control system runs constantly at
maximum cooling power, and the
temperature is not regulated.
If the temperature setting is above 28 °C,
HI appears in the air conditioning display:
The Electronic Climate Control system runs
constantly at maximum heating power,
and the temperature is not regulated.
128 Climate Control
Manual settings
Under certain circumstances (e.g. iced or
misted wind ow s), the functions of the
Electronic Climate Control system can be
modified manually.
Make manual settings as follows when
necessary:
Picture no: 16501s.tif
Wind ow demi st ing and d efrosting
Miste d or icy windows, such as in dam p
weather, from wet clothes or when outside
temperatures are low:
Press button V, V appears in the air
conditioning display.
The temperature, air distribution and fan
are set automatically, windows are quickly
demisted and de-iced.
To return to automatic mode:
Press button V or AUTO.
Heated rear window see page 130.
9 Warning
Failure to follow the instructions could
lead to misted or icy windows and
accide nts ste mming from impa ired
visibility.
129Climate Control
Picture no: 16503s.tif
Acti vati ng and d eac tiva ting ai r
conditioning compressor
Press the ECO button. EC O ap pears in the
air conditioning display.
Switch on to save fuel. In this m od e, the
cooling (air conditioning comp ressor) is
switched off.
Inflowing air is neither cooled nor
dehumidified. This restricts the level of
comfort provided by the Electronic Climate
Control system. This may cause the
windows to mist up, for example.
To return to cooling operation:
Press EC O button. ECO goes out.
Picture no: 16504s.tif
Air distribution
Press one or more of the following buttons.
The corresponding symbol appears in the
air conditioning display:
To return to automatic mode:
Press the appropriate buttons again,
or press AUTO.
Picture no: 16505s.tif
Airflow
Set airflow using the right-hand rotary
knob. The selected fan speed is indicated
by the number of bars.
To deactivate the fan and thereby the
Electronic Climate Control system:
Turn the right-hand rotary knob
anticlockwise until the display goes out.
Switching on: Turn rotary knob clockwise.
To return to automatic mode:
Press the AUTO button.
s Air distribution towards windscreen
and front door windows.
M Air distribution towards vehicle
occupants via adjustable air vents.
K Air distribution towards footwell.
130 Climate Control
Picture no: 16506s.tif
Manual air recirculation mode
The air recirculation system minimises the
entry of outside air and the air in the
passenger com partment is recirculated.
Press button 4 , % appears in the air
conditioning display.
The exchange of fresh air is reduced in air
recirculation mode. The quality of the
passenger compartment air deteriorates
which may cause the vehicle occupants to
feel drowsy. In operation without c ooling,
the air humidity increases, so the windows
may mist up. Consequently, the air
recirculation system should only be run for
short periods of time.
To switch off air recirculation:
Press button 4 again.
Picture no: 16507s.tif
Air conditioning with the engine not
running
When the vehicle is stopped and the
ignition is off, the heat or cooling power still
in the system can be used to condition the
passenger compartment, for example
when stop ped at a level crossing.
Pre ss AUTO with the ignition off. The
preselected temperature appears in the air
conditioning display. The temperature can
be adjusted with the left-hand rotary knob.
The air conditioning will operate for a
limited period of time.
To deactivate air conditioning:
Pre ss th e AUTO button.
Picture no: 16502s.tif
Heated r ear window ,
heated exterior mirrors 3
With the ignition on, the rear window and
exterior mirror heating is activated by
pressing button Ü, the air conditioning
display shows Ü.
The rear window and exterior mirrors will
quickly be cle ared of ice and cond ensa tion.
Heating works with the engine running and
is switched off automatically after approx.
15 minutes.
Depending on engine, cleaning the diesel
particle filter 3 automatically switches on
the he ated rear w indow.
131Climate Control
Picture no: 14147s.tif
Air intake
The air intakes in front of the windscreen on
the far right and left sides of the engine
compartment must be kept clear to allow
air intake. Remove any leaves, dirt or snow.
Air outlet
Do not cover the air outlets when stowing
items in the luggage compartment
stowage compartments.
Pollen f ilter
The pollen filter cleans the air entering from
outside and filters dust, soot, pollen and
spores from the interior air if the air
recirculation system 3 is active. The active
carbon layer 3 eliminates most odours and
ha rm ful a mbient ga se s from the air.
Have the pollen filter replaced at the
intervals specified in the Service Booklet.
Note
If the windscreen is misted-up due to damp
weather, tem porarily set the system as
described und er "Window demisting and
defrosting", see pages 122, 125.
Cooling 3 works most efficiently when the
windows, sunroof and tilting roof 3 are
closed. If the passenger com partment has
heated up considerably after a long period
in direct sunlight, briefly open the windows,
sunroof and tilting roof 3 so that warm air
can escape quickly.
When cooling 3 (air conditioning
compressor) is switched on, condensation
forms, w hich is expelled from the und ersid e
of the vehicle.
At least one air vent must be open while
cooling 3 (air conditioning compressor) is
on, in order to prevent the evaporator from
icing up due to lack of air movement.
Cooling switches off automatically at low
outside temperatures.
For trouble-free operation of the Electronic
Climate Control system 3, do not cover the
sensor located between the air vents
beneath the windscreen.
Maintenance
For consistently good operation, the air
conditioning compressor 3 must be
switched on for several minutes once per
month, regardless of the weather and the
time of year. Operation with the air
conditioning compressor switched on 3 is
not possible at low outside temperatures.
For faults, contact a workshop.
132 Drivin g and Opera tion
Driving and Operation
Easytronic 3
The semi-automatic Easytronic 3
transmission permits manual (Manual
mode) or automatic (Automatic m ode)
gearshifting, both with automatic clutch
control.
Picture no: 17878s.tif
Transmission display
Shows the mode or current gear.
Ea sytronic 3 ............. ............................ 132
Driving hints ......... ............................... . 138
Saving fuel, protecting the
environment ............................ .......... 140
Fuel consump tion .... .............. .............. 142
Fuel ..... ............. ............................... ...... 142
Fuel filler ca p..................... ................... 143
Refuelling . ............. ............................... . 143
Ca ta lytic converter, exhaust g ases... . 145
Drive Control System s ................... ...... 149
Brake system ... ............................... ...... 154
Anti-lock Brake System (ABS) ............ . 156
Wheels, tyres ............ .............. .............. 158
Roof racks 3 ............. ............................ 163
Towing eq uipm ent 3 ........................... 163
Towing eq uipm ent with removable
coup ling ball bar 3 ........ ............. ...... 163
Ca ra van / trailer towing ............ .......... 166
9 Warning
Disregard of these instructions m ay lead
to injuries or endanger life.
133Driving an d Operation
Picture no: 18386s.tif
Starting the engine
When starting the engine, apply the
footb rake at the same time. The engine
can only be started in position N and with
the footbrake applied. The transmission
display shows "N".
If the footbrake is not applied, the control
indicator j in the instrument cluster
illuminates and "N" flashes in the
transmission display; the engine cannot be
started.
Also the vehicle cannot be started if all
brake lights have failed.
Picture no: 14175s.tif
Easytronic operation via the selector lever
Alw ays move the selector lever all the way
to the stop . Note the gear or mode
indicator in the transmission display.
Move select or lever towa rd N
Neutral.
Selector lever in o (centre position)
Once the selector lever ha s b een moved
from N to position o (centre position) w ith
the footbrake applied, the Easytronic is in
Automatic mode and first gear has been
selected (second gear with winter
programm e enabled). "A" appears in the
transmission display.
When the footbrake is released, the vehic le
starts to "creep". If the footbrake is not
applied, "A" flashes. Start off by pressing
the accelerator immediately or move
selector lever back to N a nd repeat
procedure with footbrake applied.
Shifting to different gears takes place
automatically in Automatic mode,
depending on the driving conditions.
134 Drivin g and Opera tion
Picture no: 14175s.tif
Selector lever in A/M
Switch between Automatic and M anual
mode.
In Manual mode, gears can be selected
manually by moving the selector lever to +
or -. The current gear is indicated in the
transm ission display .
If the engine speed is too low, the
Easytronic will automatically shift to a
lower gear even in Manual mode. This
prevents the engine from stalling .
Selec tor lever in + or -
+ Shift to a higher gear.
- Shift to a lower gear.
If a higher g ear is selected when the
running speed is too low, or a lower gear
when the speed is too high, no shift is
effected. This prevents the engine from
running at too low or too high revs.
Gears can be skipped by jog ging the
selector lever repeatedly at short intervals.
When the vehicle is in Automatic mode,
Easytronic shifts to Manual mode by
moving the selector lever to position + or -.
The current gear is indicated in the
transmission display.
Selec tor lever in R
Reverse gear. Eng age only when vehicle is
stationary.
Press button on selector lever, select R.
The transmission display shows "R".
If R is selected when the vehicle is in motion,
"R" flashes in the transmission display and
no g ear is engaged.
Electronical ly cont rolled driv ing
pr og rammes in Aut omatic mode
z By means of delayed gear changing
(higher engine speeds) following a cold
start, the operating temperature
programme quickly and automatically
bring s the catalytic converter to the
temperature required for optimum
pollutant reduction.
z Adaptive programmes automatically
adapt gearshifting to suit the driving
conditions, such as if the vehicle is
tow ing a caravan / trailer, has a high
payload, or is being driven on inclines.
135Driving an d Operation
Picture no: 17889s.tif
Winter progr amme T
In the event of difficulties starting-off on
slippery roads, press button T ("A" and T
appear in the transmission display).
Easytronic switches to Automatic mode
and the vehicle sets off in second gear.
The winter programme is switched off by:
z Pressing button T again,
z Switching to Manual mode,
z Turning off the ignition.
In order to protect the Easytronic, the
winter p rogram me autom atically switches
itself off at extremely high clutch
tem peratures.
Picture no: 13322a.tif
Kick down
Ac celera tor pedal pressed past the
pressure point: below certain speeds, the
transmission shifts down into a lower gear.
Full engine power is available for
acceleration.
During kickdown, no manual gearshifting is
possible.
When the engine speed approaches its
up per limit, the transmission shifts to a
higher gear during kickdown, even in
Manual mode.
Without kickdown, this automatic shift is
not effected in Manual mode.
Brak ing assistance from eng ine
Automatic mode:
When driving dow nhill, Easytronic does not
shift into higher g ears until a fairly high
engine speed has been reached. When
brak ing, Easytronic shifts down in good
time.
Manual mode:
To utilise the engine braking effect, select a
lower gear in good time when driving
downhill.
"Rocking" the vehicle
If it becomes necessary to rock the vehicle
to free it from sand, mud, snow or a hole,
move the selector lever between o (c entre
position) and R in a repeat pattern while
applying light pressure to the accelerator
pedal. Do not race the engine and avoid
sudden a cceleration.
This applies only to the exceptional
circumstances mentioned above.
136 Drivin g and Opera tion
Picture no: 14083j.tif
Manoeuvring the vehicle
For accurate manoeuvring when pa rking ,
at garage entranc es etc., the creeping
movement can be utilised by releasing the
footbrake with a gear selected.
Never actuate a ccelerator and brake
pedals simultaneously.
In order to prevent damage, the Easytronic
disengages the "creep function" at
extremely high automatic clutch
tem peratures.
Stopping the vehicle
In Automatic or Manual mode, when the
vehicle has stopped, first gear (with Winter
mode engaged, second gear) is engaged
automatically and the clutch released.
In R, reverse remains engaged.
If a warning signal sounds when the
drivers door is opened (footbrake not
applied), move the selector lever to N and
apply the handbrake.
When stopping on grad ients, apply the
handbrake or footbrake. To prevent
overheating of the clutch, do not increase
engine speed, to ensure smooth idling
when in gear.
To prevent damage to the Easytronic, the
clutch is closed automatically at high
clutch temperatures.
Switch off engine if stopping for a lengthy
period, e.g. in traffic jams or at level
crossings.
Vehicle storage
Before leaving the vehicle:
z Apply handbrake,
z Remove ignition key.
The most recently eng aged gear (indicator
in transmission display) remains engaged.
With N, no g ear is engaged.
When the ignition is switched off, the
Easytronic no longer responds to
movement of the selector lever.
If the ignition key is not removed, the
battery may be discharged if the vehicle is
then left to stand for a lengthy period of
time.
If the handbrake has not b een applied,
control indicator R flashes for a few
seconds after the ignition is switched off.
137Driving an d Operation
Picture no: 17890s.tif
Fault
If a fault occurs in the Easytronic, control
indicator A illuminates. In the event of
serious faults, "F" a lso app ears in the
transm ission display .
It is possible to continue driving if only
control indicator A illuminates. Manual
mode can then no longer be selected.
If "F" also appears in the transmission
display, it is not possib le to continue
driving.
Have the cause of the fault eliminated by a
workshop. The self-diagnosis integrated
into the system allows rapid fault
identification.
Picture no: 14721s.tif
Interruption of p ower supply
The clutch is not disengaged if the vehicle
battery is discha rg ed and a gear has been
selected. The vehicle cannot move.
If the battery is flat, start the vehicle using
jump leads see page 172.
If the cause of the power failure is not a
discharged battery, contact a workshop. If
the vehicle must be removed from flowing
traffic, release the clutch as follows:
1. Apply handbrake and switch off ignition.
2. Open bonnet and engage support.
3.Clean Easytronic around the cap (see
illustration in prev ious c olumn) so that no
dirt can get into the opening when the
cap is removed.
4. Rotate cap to slacken and remove by
lifting upwa rds see illustration in
previous column.
5. Turn the adjusting screw clockwise using
a flat-head screwdriver (vehicle tools 3
see page 176) until clear resistance can
be felt. The clutch has now been
disengaged.
Do not turn beyond the resistance, since
this can damage the Easytronic.
6. Fit cleaned cap again. The cap must be
in full contact w ith the housing.
Towing the vehicle and starting the engine
is not permitted when the clutch has been
released in this way, although the vehicle
can be m oved a short distance.
Contact a workshop immediately.
138 Drivin g and Opera tion
Driving hints
The first 600 miles (1000 km)
Drive your vehicle at various speeds.
Do not use full throttle. Never allow the
engine to labour at low revs.
Make good use of all gea rs.
Depress the accelerator pedal a maximum
of approx. three quarters of the available
pedal travel in all gears.
Do not drive faster than three quarters of
maximum speed.
Do not brake unnecessarily hard for the
first 125 miles (200 km).
Never coast with engine not running
Many units will not function in this situation
(e.g. brak e serv o unit, Electric Power
Steering (EPS) 3). Driving in this manner is
a danger to yourself and others.
Brake servo unit
When the engine is not running, the brake
servo unit is no longer effective once the
footbrake has been depressed once or
twice. Braking effect is not reduced, but
significantly greater force is required for
braking.
Electric Power Steering (EPS) 3
If the E lectric Power Steering fails when
being towed with the engine switched off,
the vehicle can still be steered, but
considerably more force is required.
Driving in mountainous terrain or with a
caravan / trailer
The cooling fan is electrically operated. Its
cooling p ower is therefore independent of
the engine speed.
Since a considerable amount of heat is
generated at high engine speeds and less
at slower speeds, do not shift d own when
climbing hills w hile the vehicle is still c op ing
with the gradient in the higher gear.
Dr iving with a roof load
Do not exceed the permissible roof load,
see page 214. For reasons of safety,
distribute the load evenly and secure it
properly w ith retaining straps.
Ad just tyre pressure to load conditions.
Do not d riv e faster than 75 mph
(120 km/h). Check and retighten the straps
frequently. Observe country-specific
re gulations.
Sw itching off the engi ne
When you switch off, fans in the engine
compa rtm ent may continue running for a
time to cool the engine.
If the engine temperature is very high, e.g.
after driving in mountainous terrain:
Allow the engine to idle for approx.
two minutes in order to prevent heat
accum ulation.
Vehicles with turbocharged engine:
After running at high eng ine speeds or high
eng ine loads, operate the engine briefly at
a low load or run in neutral for approx.
30 seconds before switching off, in order to
protect the turbocharger.
Sa ve energy – more miles / kilom etres
Please observe the running-in hints on the
previous page a nd the tips for energy
saving on the following pages.
Good, technically correct and economical
driving ensures maximum durab ility and
performance for your vehicle.
139Driving an d Operation
Overrun
The fuel supply is autom atically shut off
during overrun, e.g. when the vehicle is
being driven down long gradients or when
braking. To enable the overrun cut-off to
take effect, do not accelerate during
overrun and on manual vehicles, do not
release the clutch. To prevent dam age to
the catalytic converter, overrun cut-off is
tem porarily deactivated when the catalytic
converte r tem perature is high.
Vehicles with turbocharged engine:
Flow -g enerated noises may be aud ible if
the accelerator is released quickly, on
account of airflow in the turbocharger.
Engine speed
Drive in a low engine speed range for each
gear as much as possible.
Warming up
Allow the engine to warm up while driving.
Do not w arm it up by letting it run at idling
speed. Do not apply full throttle until the
engine has reached operating
tem perature.
After a cold start, the Easytronic 3 does
not switch to higher gears until the speed
increases when it is in Automatic mode.
This allows the catalytic converter to
quickly reach the temperature that is
required for optimum emission reduction.
Correct gear selection
Do not ra ce y our e ngine while the
transmission is in neutral or with a low gea r
selected. Driving too fast in individual
gears as well as stop-and-go traffic
increases engine wear and fuel
consumption.
Change down
When decreasing speed, shift down into
the next lowest gear. Do not slip the clutch
with a high-revving engine. This is
especially important when hill climbing.
Clutch operation
Always depress the clutch pedal hard to
the floor to prevent shifting difficulties and
transmission dam age.
When driving, do not use the pedal as a
footrest; this will cause substantial clutch
wear.
Cooling fan
The cooling fan is controlled via a
therm oswitch and therefore only runs if
necessary.
Depending on engine, cleaning the diesel
particle filter 3 automatically switches on
the cooling fan.
Pedals
Do not place any objects in the footwell
which could slip under the pedals and
inhibit the pedal travel.
To ensure the pedal travel is uninhibited,
there must be no mats in the area of the
pedals.
Battery care
When driving slowly or when the vehicle is
stationary, e.g. in slow urban traffic, stop-
and-go traffic or traffic jams, turn off all
unnecessary electrical loads where
possible (e.g. heated rear window, heated
front se ats, etc. ).
Declutch when starting, in order to relieve
the strain on the starter and the battery.
140 Drivin g and Opera tion
Saving fuel, protecting the
environment
Trend-setting technology
In the development and manufacture of
your vehicle, environment-friendly and in
the main recyclable materials were used.
The production methods used to make
your vehicle are likewise environmentally-
compatible.
Recycling of production wastes keeps the
circulation of material closed. Reduction of
energy and water requirements also helps
to conserve natural resources.
A highly advanced design means that your
vehicle can be easily disassembled at the
end of its working life, and the individual
materials separated for subsequent re -use.
Materia ls such as asbestos and cadmium
are not used . The refrigerant in the air
conditioning system 3 is CFC-free.
New painting techniques employ water as
a solvent.
End-of-Life vehicle recovery
For detailed information on Vauxhalls
on-going commitment to achieving an
environmentally susta inab le future ,
including; design for recycling, take back of
End-of-Life Vehicles (ELVs) and the
recycling of ELVs, view
www.vauxhall.co.uk/recycling for details.
Energy and environm ent-c onsci ous
drivi ng
z High noise levels and exhaust emissions
are often a result of driving w ithout due
attention to saving energy and
protecting the environment.
z You should therefore drive with energy in
mind "more miles / kilometres less fuel".
Reduce the noise level and exhaust
emissions by adopting an environment-
conscious driving style. This is extremely
worthwhile and improves the quality of
life.
Fuel consumption depends to a great
extent on your own personal driving
style. The following hints are intended to
help you consume fuel at a rate that is as
close as possible to the specified levels
see page 212.
Check your vehicle’s fuel consumption
every time you refuel. This facilitates
early detection of any irregularities
causing increased fuel consumption.
Warming up
z Full throttle and w arming up at idle
speed increase wear, fuel consumption,
ex haust em ission, the am ount of
pollutant in the exhaust and the amount
of noise.
z Drive off imm ediately after starting.
Warm up the engine by running it at
moderate engine speeds.
Uniform speed
z Hectic driving significantly increases fuel
consumption, the exhaust emissions, the
proportion of pollutant in the exhaust
gas and the noise level.
z Do not accelerate and brake
unnecessarily. Drive at uniform speed,
watching the road.
Avoid freq uent starting-off and stopping
e.g . at traffic lights, in short distance
traffic and in queues of traffic by means
of clever planning . Select roads w ith
good traffic flow.
Idling
z The engine also consumes fuel when
idling .
z If you have to wait for more than one
minute, it is worthwhile switching off the
engine. Five minutes of idling
corresponds to approximately 0.6 miles
(one kilometre) of driving.
141Driving an d Operation
Overrun
z The fuel supply is automatically shut off
during overrun, e.g. when the vehicle is
being driven down long gradients or
when braking – see page 139.
z To enable the overrun cut-off to come
into action and save fuel, do not
accelerate or declutch during overrun.
Corr ect gear sel ec tion
z High revs increase engine w ear and fuel
consumption.
z Do not race your engine. Avoid driving at
high engine speeds.
Making use of the tachometer helps to
save fuel. Drive in a low engine spee d
range for each gear as much as possible
with uniform engine speeds. Drive as
often as possible in top gear, select the
next higher gear as soon as possible,
and only change down when the engine
is no longer running perfectly smoothly.
High speed
z The higher the speed, the higher the
consumption and the noise level. At top
speed, you consume a great deal of fuel
and produce excessive noise and
exhaust emissions.
z Slightly releasing the accelerator pedal
results in distinct fuel savings with no
major loss of speed.
Drive at no more tha n approx. three
quarters of maximum speed and you will
use up to 50% less fuel, without losing a
great deal of time.
Tyre pressure
z Inadequate tyre pressure, leading to
higher road resistance, costs money in
two ways: for more fuel and increased
tyre wear.
z Regular checks (every 14 d ays) pay off.
Ele ctri cal loa ds
z The power consumption of electrical
equipment increases fuel consumption.
z Switch off all auxiliary electrical loads
(e.g. air conditioning 3, heated rear
window) when not needed.
Ro of rack s, sk i-ho lde rs
z Due to air resistance, a roof load can
increase fuel consump tion by approx.
3.5 gal./1000 miles (1 l/100km).
z Remove them if they are not being used.
Repair and m aintenance
z Improper repairs or adjustm ent and
maintenance work can increase fuel
consumption. Do not carry out work on
the engine yourself.
You may, out of ignorance, infringe
environmental law s b y not disposing of
materials properly.
Appropriate parts might not be recycled.
Contact with some of the materials
involved may pose a health hazard.
z We recom mend that repair and
maintenance be entrusted to your
Vauxhall Authorised Repairer.
Extr eme d riving conditions
z Going up steep slopes, cornering, driving
on poor roads and winter driving a ll
increase fuel consumption.
Fuel consumption increases dramatically
in urba n tra ffic a nd at winter
temperatures, especially on short trips
when the engine operating te mpera ture
is not reached.
z Follow the hints given above to keep
consumption to a minimum under such
cond itions.
142 Drivin g and Opera tion
Fuel consumption
Fuel consumption is determined under
specific driving conditions – see page 212.
Special equipment increases the weight of
the vehicle. As a result, they can increase
fuel consumption and reduce the specified
maximum speed.
For the first few thousand miles /
kilometres, friction between the engine and
transmission components is higher. This
increases fuel consumption.
Fuel
Fuel for petrol engines
Normal c ommercial high-quality fuels with
a m aximum ethanol content of 5% in
accordance with DIN EN 228 are suitable
(for catalytic converter see page 145, for
octane numbers see page 208). The
quality thereof has considerable effect on
the performance, running and service life
of the engine. The additives mixed with the
fuel are extremely important. For this
rea son you must only refuel with high-
quality fuels containing additives.
Fuels with ethanol content greater than 5%
do not comply w ith DI N EN 228 a nd must
not b e used unless the v ehicle ha s b een
specifically developed and approved for
these fuels.
Fuel with too low an octane number can
cause pinking. Vauxhall cannot be held
lia ble for resulting damage.
Petrol with a higher octane number can
always be used.
Do not use 91 octane petrol in vehicles with
the Z 16 LET
1)
engine.
The ignition tim ing is automatically
adjusted according to the grade of fuel
used (octane number) see page 208.
Use of petrol with an octane rating of 95
will ensure economica l driving.
For ve hicles with Z 16 LE T
1)
engine, use of
95 RON fuel reduces performance and
torque.
F uel for die sel engi nes
Diesel engines must be operated only on
comm ercially available diesel fuel meeting
the specifications of DIN EN 590.
Since January 2004, some oil comp anies
have mixed their diesel fuel with up to 5%
Bio fuel (FAME = Fatty Acid Methyl Esters)
like RME (Rape-Oil Methyl Ester). This is in
accordance with the current DIN EN 590
and does not harm the fuel injection
system. The characteristics of a diesel fuel
mixed up with 5% Bio fuel (FAME) do not
differ from conventional diesel fuel and do
not influence the vehicle’s driveability.
Important: Diesel fuel mixed with 5% FAME
according to DIN EN 590 must not be
confused with 100% Bio Diesel, which is not
to be used in Vauxhall engines.
The flow and filterability of diesel fuel are
temperature-dependent.
Diesel fuels with improved low temperature
prope rties are therefore a vailable on the
market during the winter months. Make
sure that you fill the tank with winter fuel
before the start of the cold weather
season.
Additives can be used with diesel fuels with
winter prop erties that are guaranteed by
the manufacturer and when using diesel
fuel filters that are heated depending on
the outside temperature.
Diesel fuels must not be diluted with fuels
that are intended for petrol eng ines.
1)
Sales designation see page 208.
143Driving an d Operation
Fuel filler cap
When replacing the fuel filler cap, be sure
to use a genuine fuel filler cap for your
model to ensure full functionality. Diesel-
engined vehicles have special fuel filler
caps.
Picture no: 15829t.tif
Refuelling
9 Warning
Care m ust be taken when handling fuel.
Before refuelling, turn off engine a nd also
shut off external heaters with com bustion
chambers (identified by stickers on fuel
filler cap). Switch off mobile phones.
9 Warning
Fuel is flammable and explosive. When
ha nd ling fuel or when in the immediate
vicinity, avoid naked flames or sparks. Do
not smoke. This also applies where the
presence of fuel is reveale d by its
characteristic smell. If fuel odours occur in
the vehicle, have a workshop eliminate
the fault immediately.
144 Drivin g and Opera tion
Picture no: 14191s.tif
Fuel filler neck at right rear sid e of vehicle.
The tank flap is locked together with the
doors see page 30.
Open the tank flap.
To open, unscrew the fuel filler cap, remove
and suspend from the tank flap.
The fuel tank has a limiting system which
prevents overfilling of the tank.
Correct filling depends to a large extent on
proper operation of the fuel dispensing
pump:
1. Fully insert the pump nozzle and switch it
on.
2. At the automatic sw itch-off, the
specified tank capacity is reached by
means of metered refuelling (twice).
Insert fuel dispensing pump as far as
possible.
To close, place fuel filler cap in position and
turn, overcoming the resistance until the
ratchet on the cap engages audibly.
Close tank flap.
Wipe off any overflowing fuel im mediately.
145Driving an d Operation
Picture no: 6448u.tif
Catalytic converter, exhaust
gases
Ca talytic conv er ter for petrol engines
Leaded fuel will damage the catalytic
converte r and parts of the elec tronic
system, rendering them inoperative.
Use of high-quality fuels other than those
specified on page 142 (e.g. LRP
1)
) could
damage the catalytic converter.
Damage to the catalytic converter or the
vehicle may result if the follow ing points
are not observed:
z On ignition faults, uneven running after
cold start, a clear drop-off in engine
power or other unusual operating
symptoms which could indicate a fault in
the ignition system, contact a workshop
immediately. Continue driving if
necessary for a short time at low speed
and low revs.
Irregular engine running and a loss of
engine power when the Electronic
Stab ility Programme ESP®
Plus
3 comes
into action are due to the operating
conditions and are therefore of no
significance - see pag e 149.
z If unburned fuel enters the catalytic
converter, this may result in overheating
and irreparable damage to the c atalytic
converter.
You should therefore avoid
unnecessarily long use of the starter
when starting-off, running the tank dry
(an irregular fuel supply w ill lead to
overheating) and starting the engine by
pushing or towing.
1)
LRP = Lead Replacement Petrol.
146 Drivin g and Opera tion
z If the control indicator Z flashes to
indica te emissions, back off until the
flashing stops and the control indicator
illuminates. Contact a workshop
immediately. Control indicator for
emissions Z, see page 147.
Cata lytic converter for d iesel engines
Damage to the catalytic converter or the
vehicle may result if the follow ing points
are not observed:
z On uneven running, a clear drop-off in
eng ine power or other unusual ope rating
symptoms, contact a workshop
immediately. Continue driving if
necessary for a short time at low speed
and low revs.
Irregular engine running and a loss of
engine power when the Electronic
Stab ility Programme ESP®
Plus
3 comes
into action are due to the operating
conditions and are therefore of no
significance - see pag e 149.
Picture no: 17875s.tif
C ontrolling exhaust em ission
Some of the damaging substances in the
exhaust such as carbon monoxide (CO),
hydrocarbons (HC) and nitrous oxides
(NO
x
) are reduced to a minimum by
making structural changes mainly in the
injection system and the ignition system in
conjunction with the catalytic converter.
147Driving an d Operation
Picture no: 17891s.tif
Control indicator Z for exhaust
Illuminates when the ignition is switched on
and during the start attempt. Goes off
shortly after the engine starts running.
Illuminated with the engine running
indicates a fault in the exhaust gas
cle aning system . The permitted em issions
may be exceeded . Contact a workshop
immediately.
Flashing with the engine running indicates
a fault which could lead to catalytic
converter damage. You may continue
driving without damage if you back off
until the flashing stops and the control
indica tor illuminates steadily. Contact a
workshop immediately.
Picture no: 17880s.tif
Control indicator A for engine e lectronics
Illuminates for a few seconds after the
ignition is turned on.
If it illuminates when the engine is running,
there is a fault in engine or transmission
electronics. The electronic system switches
to an emergency running programme. Fuel
consumption may be increased and the
driveability of the vehicle may be impaired.
In some cases, faults can be elim inated by
switching off the engine and restarting. If
the control indicator illuminates again
when the engine is running, contact a
workshop to eliminate the cause of the
fault.
148 Drivin g and Opera tion
If it illuminates briefly, but does not recur,
it is of no significance.
Illumination of control indicator A can
indicate water in the diesel fuel filter 3.
Check diesel fuel filter for possible water
residue, see page 230.
If it flashes after the ignition is switched on,
there is a fault in the immobiliser system.
The engine cannot be started –
see page 27.
Exhaust gases
During the first drive, smoke may develop
because of wax and oil evaporating on the
exhaust system. Park the vehicle in the
open for a while after the first drive and
avoid inhaling the fumes.
Diesel pa rticle filt er 3
The diesel particle filter system filters
harmful soot particles out of the exhaust
gases.
The system c ontains a self-cleaning
function at set intervals. The filter is
cleaned by burning the soot particles at
high temperature. This process is
automatic in certain driving conditions and
can take up to 25 minutes. During this time,
fuel consumption may be increased. Some
od ou r a nd sm ok e are n ormal.
Under certain driving cond itions, e.g. short
journe ys, the sy ste m may not clea n itself
automatically.
If control indicator ! flashes, drive on and
as soon as road and traffic conditions
allow, increase the speed to over 25 mph
(40 km/h) to start the diesel p article filter
cleaning. Cleaning is quickest at high
speeds and under load . The engine spe ed
should not fall below 2000 rpm. The control
indicator goes out as soon as cleaning is
complete.
We recommend not switching off the
ignition during cleaning.
9 Warning
Engine exhaust gases contain poisonous
carbon m onox id e, which is colourless and
odourless and could be fatal if inhaled.
If exhaust gases penetrate the vehicle
interior, open a window and contact a
workshop .
149Driving an d Operation
Maintena nce
Have all maintenance work carried out at
the intervals specified. We recommend
that you entrust this work to your Vauxhall
Authorised Repairer, who has proper
equipm ent and trained personnel
available. Electronic testing systems permit
rapid diagnosis and remedy of faults. This
way you can be certain that all
components of the v ehicle’ s electrical,
injection and ignition systems operate
correctly, that your vehicle has a low level
of pollutant emission and that the c atalytic
converter system will have a long service
life.
You are thereby making an important
contribution towards keeping the air clean
and complianc e with emissions legislation.
Checking and adjustment of the fuel-
injection and ignition systems is part of the
scope of a Service. For this reason you
should have all maintenance work carried
out at the intervals specified in your Service
Booklet.
Drive Control Systems
Electronic Stab ility Program me
(E SP ®
Pl us
) 3
ESP®
Plus
improves driving stability as
necessary in any driving situation
regardless of the type of road surface or
tyre grip. It also prevents the drive wheels
from spinning.
The system monitors vehicle movements.
As soon as the vehicle starts to swerve
(understeers / oversteers) engine output is
reduced (the sound of the engine cha ng es)
and individual wheels are specifically
braked. This considerab ly improves the
driving stability of the vehicle on snow and
ice and on wet or slippery road surfaces.
ESP®
Plus
is ready for operation as soon as
the ignition is switched on and control
indica tor v goes out.
Whe n ESP®
Plus
comes into action, control
indica tor v flashes.
The vehicle is now in a critical situation;
ESP®
Pl us
allows you to keep control of the
vehicle and reminds you to match your
speed to the road conditions.
9 Warning
Do not let this special safety feature
tempt you into taking risks w hen driving.
Traffic safety can only be achieved by
adopting a responsible driving style.
150 Drivin g and Opera tion
Control indicator v:
Illuminates for a few seconds after the
ignition is turned on. The system is ready
for operation when the control indicator
goes out.
Flashes while driving:
This shows that the system has come into
action. The engine output may be reduced
(the sound of the engine changes) and the
vehicle may be braked automatically to a
small degree.
Picture no: 17892s.tif
Illuminates while driving:
Fault in the system. Driving can be
continued. Poor road surface conditions
may however still cause vehicle stability to
be impaired.
Have the cause of the fault eliminated.
Self-diagnosis integrated into the system
allow s rapid fault identification.
Illuminates after interruption of power
supply e.g. after disconnecting battery.
After a power supply interruption, the
steering angle sensor must be calibrated to
make the system operational:
z Automatic calibration driving in a
straight line at a constant slow speed
(12 to 25 mph (20 to 40 km/h)) on a level,
dry road.
z Manual calibration by turning steering
wheel from limit position to limit position.
If the control indicator does not go off after
successful calibration, observe notes in
middle column.
151Driving an d Operation
Cruise control 3
Cruise control can store and maintain
speeds of approx. 20 to 125 m ph
(30 to 200km/h). Deviation from the stored
speed is possible on uphill or d ownhill
inclines.
For safety reasons, the cruise control
cannot be activated until the footbrake
has been applied once.
The c ruise c ontrol is operated with the
buttons I, R and O on the turn signal stalk.
Do not use cruise control if it is not
advisable to maintain a constant speed
(e.g. in situations presenting a danger to
yourself and other road users, in heavy
traffic or on winding, slippery or greasy
roads).
With Easytronic 3, only use cruise control
when in Automatic mode.
When the cruise control is active, reaction
tim es ma y b e increased due to the d ifferent
position of the feet.
Picture no: 17893s.tif
Control indicator m:
Illuminates for a few seconds when the
ignition is switched on. The system is now
ready for operation.
When driving, control indicator m will
illuminate as soon as the system is switched
on.
9 Warning
Even with cruise control activated, the
driver has full responsibility for
maintaining an app ropriate speed.
Disregard of these instructions could lead
to injury or danger to life.
152 Drivin g and Opera tion
Picture no: 7758u.tif
To activate:
Tap b utton I:
The c urrent speed is stored and
maintained. The accelerator pedal can be
released.
Vehicle speed can be increased by
depressing the accelerator pedal. When
the accelerator pedal is released, the
previously stored speed is resumed.
Ac celera te:
With cruise control active, hold down
button I or tap it repeatedly: the speed is
increased continuously or in steps of
1.2 m ph (2 km/h) without using the
accelerator pedal.
The current speed is stored and saved after
the I button has been released.
Decelerate:
With cruise control active, hold down
button R or briefly press it repeatedly:
speed is reduced continuously or in
ste ps of 1.2 m ph (2 k m/h).
The current speed is stored and saved after
the R button has been released.
To deactivate:
Tap button O:
Cruise control is switched off.
The vehicle slowly decelerates. To continue
driving, depress the accelerator pedal in
the usual way.
For reasons of safety, cruise control
deactivates under certain d riving
conditions.
For example:
z if the vehicles speed drops below
approx. 20 mph (30 km/h) or,
z if the footbrake is depressed or,
z if the clutch pedal is dep ressed or,
z if Easytronic 3 selector lever in N .
Resuming the stored speed:
Tap button R at a speed a bove 20 mph
(30 km/h): the speed selected before the
cruise control w as switched off is resumed.
The stored speed value is deleted when the
ignition is switched off.
153Driving an d Operation
Parking distance sensors 3
Parking distance sensors make reverse
parking easier by measuring the distance
between the rear of the vehicle and an
obstacle through ultrasonic reflection, and
by warning you with an acoustic signal in
the passenger compartment.
The system record s the distance using four
sensors in the rear bumper.
To activate:
The parking distance sensors activate
automatically when the ignition is sw itched
on and reverse gear is engaged.
Operational readiness is indicated by a
brief tone.
If the vehicle slowly gets close to an
obstacle w hile reversing, an intermittent
acoustic signal is audible in the passenger
compartment when the vehicle tail is less
than one metre from the obstacle. The
interval between the signals becomes
shorter as the distance is reduced. If the
distance is less than 30 cm, a continuous
signal is audible.
Picture no: 14779s.tif
To deactivate:
The system deactivates automatically
when reverse gear is disengaged.
Towing equipment,
caravan / trailer towing:
If a towing device is subsequently fitted to
the vehicle, the system must be set to the
modified vehicle length by a workshop.
When operating without a trailer, the tow
bar must be removed, else the system can
be damaged.
Fitting rear load racks 3:
Rear load racks, e.g. bicycle racks, fitted
near the sensors could disrupt the system.
Fault:
On system faults, a permanent tone
sounds at a dista nce of 1 metre from the
obstacle. Have the cause of the fault
elimina ted by a workshop.
In order to avoid operational problems or
erroneous information, the sensors must be
undamaged and free of soiling, snow and
ice.
9 Warning
Under certain circumstances, various
reflective surfaces on objects or clothing
as well as external noise sources may
cause the system to fail to detect
obstacles. For this reason, care must be
taken when reversing even if the parking
distance sensors are operational. This is
of particular importance when in the
vicinity of p edestrians.
154 Drivin g and Opera tion
Brake system
The effectiveness of the brakes is an
important factor for traffic safety.
To improve effectiveness, do not brake
unnecessarily hard for the first 125 miles
(200 km) after new brake pads have been
fitted.
Brake pad wear must not exceed a
specified limit. Regular maintenance as
detailed in the Service Booklet is therefore
of the utmost importance for traffic safety.
Have worn brake pads replaced by a
workshop.
Tested and approved pads give optimum
braking performance.
Brake pads worn to the minimum level
cause grinding noises. You may continue
to drive but have the pads replaced as
soon as possible. To change the pad s,
contact a workshop.
Picture no: 14722s.tif
Brak e assist
If the footbrake is operated with a powerful
push, the vehicle is automatically braked
at full braking power in order to achieve
the shortest possible braking distance
when full-on braking occurs (braking
assistant).
Maintain steady pressure on the footbrake
for as long as full-on braking is to continue.
When the footbrake is rele ased, the
maximum brake force amplification is
taken away.
Ad aptive brake li ghts 3
During full-on braking, all three brake
lights flash for the duration of ABS control.
155Driving an d Operation
Footbrake
The footbrake comprise s tw o independe nt
brake circuits.
If one brake circuit faults, the vehicle can
still be braked with the other brake circuit.
However the braking effect will occ ur a t a
lower pedal position and consid erably
more force is required. The braking
distance is longer. Contact a w orkshop
before continuing to drive.
To ensure that full pedal travel can be
utilized, especially in case of a fa ult in one
of the brake circuits, there must b e no mats
in the vicinity of the pedals see page 139.
When the engine is not running, the
assistance of the brake servo unit
disappears once the footbrake has been
depressed once or twice. Braking effect is
not reduced, but b raking requires
significantly greater force. This is especially
important to bear in mind when towing.
Check the brake lights before starting out
on a journey.
Shortly after starting each journey, the
effectiveness of the brake system should
be tested at low speeds and without
inconveniencing other traffic, especially if
the brakes are wet, e.g. after the vehicle
ha s b een washed.
The brake fluid level should be checked
regularly. If the brake fluid level is too low
and the handbrake is not applied, control
indica tor R illuminates in the instrument
cluster see page 87.
Hill St art Assist 3 (HS A )
The system helps pull away on inclines.
After releasing the footbra ke, if the
ha ndbrake is not applied, the brakes are
only released after 2 seconds. As soon as
the acceleration is sufficient to prevent
rolling back, the brake is released.
Picture no: 14723s.tif
Handbrake
Always apply handbrake firmly. On slopes,
apply the handbrake as firm ly as possible.
The mechanical handbrake a cts on the
brakes on the rear wheels. It eng ages
automatically when app lied.
To release the handbrake, p ull the lever up
slightly, press the ratchet knob, and fully
lower the lever.
To reduc e the operating forces of the
handbrake, apply the footbrake at the
same time.
156 Drivin g and Opera tion
Picture no: 17894s.tif
Brak e sy stem con trol i ndicat or R
The control indicator illuminates after the
ignition is turned on, when the ha ndb ra ke
is applied or if the b ra ke or clutch fluid level
is too low. Brake fluid – see page 232.
For ve hicles with Ea sy tronic 3 , the c ontrol
indicator flashes for a few seconds when
the ignition is turned off, if the handbrake
is not app lied.
Anti-lock Brake System (ABS)
ABS contin uous ly monitors th e v ehicle s
brak e system and prev ents the wheels from
locking regardless of the road condition
and tyre grip.
It starts to regulate the braking pressure as
soon as a wheel shows a tendency to lock.
The vehicle rema ins stee rable, even in the
event of very heavy braking, for instance
on bends or when swerving to avoid an
obstacle. Ev en in the c ase of full-on
braking, the ABS makes it possible to drive
round an obstacle without releasing the
brakes.
ABS control is mad e apparent through a
pulse in the footbrake and the noise of the
regulation process.
9 Wa rning
If the control indicator illum inates when
the handbrake is released, stop driving
im media tely. Contact a workshop.
9 Warning
If the control indicator illuminates when
the handbrake is released, stop driving
immediately. Contact a workshop .
9 Warning
For op tim um brak ing, keep the footbrak e
fully depressed throughout the braking
process, despite the fact that the pedal is
pulsating. Do not reduce the pressure on
the pedal.
Do not let this special safety feature
tempt you into taking risks when driving.
Traffic safety can only be achieved by
adopting a responsible driving style.
157Driving an d Operation
Picture no: 17895s.tif
Cont rol indica tor u for ABS
The control indicator illuminates for a few
seconds after the ignition is turned on. The
system is ready for operation when the
control indicator goes out.
If the control indicator does not go out
after a few seconds, or if it illuminates while
driving, there is a fault in the ABS. The
brake system remains operational without
ABS regulation.
Self-check
Each time the ignition is turned on and the
engine is started, after driving at a speed
of approx. 2 mph (3 km/h), the system
performs a self-check which may be
audible.
Fault
You can continue driving, provided you
drive with care and anticipation.
Have the cause of the fault eliminated by a
workshop. The self-diagnosis integrated
into the system allows rapid fault
identification.
9 Warning
If there is a fault in ABS, the wheels may
be subject to loc king due to braking that
is heavier than normal. The advantages
of ABS are no longer op erational.
158 Drivin g and Opera tion
Wheels, tyres
See page 216 for suitable tyres and
restrictions.
Tyres fitted in the factory are adapted to
the chassis and provide optimum driving
comfort and safety.
Changing tyre / wheel type
Before changing to other tyres or wheels,
note the necessary changes.
If tyres of a different size than those fitted
at the factory are used, the electronic
speedometer may require reprogramming
to ensure that the correct speed is
displayed.
Fit ting ne w ty re s
Fit tyres in pairs or in sets, which is even
better. Ensure that tyres on one axle are:
z the same size,
z the same design,
z the same make,
z and have the same tread pattern.
Fit directional tyres such that they roll in the
direction of travel. The rolling direction is
indica ted by a symbol (e.g. an arrow) on
the sidewall.
Tyres fitted opposing the rolling direction
(such as when changing a tyre) should be
refitted as soon as possible. This is the only
way to benefit fully from the design
prop erties of the tyre.
When disposing of tyres, follow the legal
re quir em e nts.
Certain brands of tyre have a beaded edge
to protect alloy wheels from damage. If
wheel trims are used on steel wheels with
beaded-edge tyres, the following
procedure must be followed:
z Use wheel trims and tyres that are
approved by Vauxhall for the vehicle in
question and therefore mee t all the
requirements pertaining to the
respective wheel / tyre combination.
z If the wheel trims and tyres used are not
Vauxhall-approved, the tyres must not
ha ve a beaded edge.
9 Wa rning
Use of unsuitable tyres or wheels may
lead to accidents and render the vehicle
unroadworthy.
9 Warning
Use of unsuitable tyres or wheel trims
could lead to sudden loss of air and
thereby accidents.
159Driving an d Operation
Tyre pr essure
Check tyre pressure, including the spare
wheel, at least every 14 days and prior to
any long journey; the tyres should be
checked when cold. Don’t forget to check
the spare 3.
Picture no: 14194s.tif
Use the valv e cap key to m ake unscrewing
the valve caps easier. The key is located on
the inside of the tank flap.
Tyre pressure, see page 216.
Do not reduce tyre pressure when the tyres
are wa rm. O therwise the pressure may
drop below the permissible minimum when
the tyres cool down.
After having checked the tyre pressures,
tighten the valve caps using the valve cap
key.
Picture no: 9358t.tif
Incorrect inflation pressures will impair
safety, vehicle handling, comfort and fuel
economy and will increase tyre wear.
If the pressure is too low, this can result in
considerable tyre heating and internal
damage, leading to tread separation and
even ty re blow-out at high speeds.
Hidden tyre dama ge is not eliminated by
adjusting the inflation p ressure.
9 Warning
Incorre ct ty re pressure could lead to a flat
tyre.
160 Drivin g and Opera tion
Picture no: 15941s.tif
Tyre condition, wheel condition
Drive over edges slowly and at a rig ht
angle if p ossible. Driving ov er sha rp edge s
can lead to hidden tyre damage and wheel
damage which is only noticed later on.
When pa rk ing, ensure that the tyres a re not
pressed against the edge of the kerb .
Check tyres regularly for damage
(penetrated foreign bodies, punctures,
cuts, cracks, bulges in side walls). Check
wheels for damage. If dam age or unusual
wear is found, contact a workshop.
Picture no: 6456u.tif
Tread depth
Check tread depth regularly.
If w ear is greater in the front than in the
rear, switch the front and rear tyres.
Correct the tyre pressures.
For reasons of safety, tyres should be
re placed when their tread depth has worn
down to 2 to 3 mm (winter tyres: 4 mm).
9 Warning
Dama ge may lead to tyre blow-out.
161Driving an d Operation
Picture no: 6457u.tif
The legally permissible minimum tread
depth (1.6 mm) has been reached when
the tread has worn down as far as one of
the tread wear indicators (TWI
1)
). A
number of tread wear indicators are
spaced at equal intervals around the tyre
within the tread. Their position is indicated
by markings on the tyre sidewa ll.
General informati on
z The risk of aqua planing is greater if the
tyres are worn.
z Tyres age, even if they are used only very
little or not at all. A spare wheel which
has not been used for six years should be
used with care.
z Never fit used tyres the previous history
and use of which you do not know.
z So as not to impair brake cooling , use
only wheel trims approved for use on
your vehicle.
Tyre designations
Meanings:
e.g. 17 5/7 0 R 14 88 T
Speed code letters:
1)
TW I = Tread Wear Indicator.
175 =Tyre width inmm
70 = Cross-section ratio (tyre depth to
width in %)
R = Belt type R adial
14 = Wheel diam eter in inc h
88 = Load index
e.g. 88 corresponds to 567 kg
T = Speed code letter
Q up to 100 mph (160 km/h)
S up to 112 mph (180 km/h)
T up to 118 mph (190 km/h)
H up to 130 mph (210 km/h)
V up to 150 mph (240 km/h)
W up to 168 mph (270 km/h)
162 Drivin g and Opera tion
Winter tyres 3
For notes on fitting new tyres – see
page 158.
See page 216 for restric tions.
Winter tyres (M + S tyres) improve safety at
tem peratures below 7 °C and should
therefore be fitted on all the wheels.
The d esign of summ er tyres mea ns they
have limited qualities for winter driving.
If the maximum permissible speed for the
winter tyres is less than that of the vehicle,
a notice ind icating the maximum
permissible speed for the tyres must be
affixed within the drivers field of vision
1)
.
If y ou use the spare wheel when it is fitted
with a summer tyre, the vehicles
driveability may be affected, especia lly on
slippery road surfaces. Obtain a
replacement for the faulty tyre as soon as
possible, and have the wheel balanced
and fitted to the vehicle.
Wheel covers 3
If the whee l trims and tyre s used are not
Vauxhall-approved, make sure that the
tyres d o not hav e a bea ded edge see
page 158.
Picture no: 6459u.tif
Ty re ch ain s 3
Limitations and further information –
see page 216.
Tyre chains are only permitted on the drive
wheels (front axle). They must be fitted to
the tyres symmetrically in order to achieve
a concentric fit.
Alw ays use fine mesh chains that add no
more than 10 m m to the tyre tread and the
inboard sides (including chain lock).
Wheel trims on steel wheels could come
into contact w ith parts of the chain and be
damaged. Remove the wheel trim –
see page 178.
Tyre cha ins may only be used at sp eeds up
to 30 mph (50 km/h) and, when travelling
on roads that are free of snow , they m ay be
used for brief periods only since they are
subject to rapid wear on a hard road and
may snap.
Temporary spare wheel 3:
Tyre chains must not be used on the
temporary spare wheel. If you need to use
tyre chains after suffering a flat front tyre,
fit the temporary spare on the rear axle
and transfer one of the rear wheels to the
front axle.
For notes on the temporary spare wheel
see pages 178, 216.
Changing wheels – see page 178.
1)
Varies from country to country on account of
national regulations .
163Driving an d Operation
Roo f racks 3
For safety reasons and to avoid roof
damage, we recommend using the
Vauxhall roof rack system approved for
your vehicle.
Disengage covers concealing roof rack
mounts by pushing sliders in direction of
arrow (e.g. with coin) and remove. To close
roof rack mounts, insert covers at front and
enga ge sliders at rear.
Fasten the roof rack following the
instructions that ac company the system.
Driving hints see page 138.
Towing equipment 3
Only use a trailer towing device approved
for the vehicle. Have a towing device fitted
by workshop, who will inform you of any
possible trailer load increases. They will
have the instructions for fitting the device
and any necessary changes to the vehicle
concerning cooling, heat shields or other
devices.
Mounting dimensions of towing
equipment 3 see page 222.
Picture no: 14195s.tif
Towing equipment with
removable c oupling ball b ar 3
St owage of coup ling ba ll bar
The coupling ball bar is located in a bag
with the vehicle tools housed under the
spare wheel - see illustration above.
Spare wheel 3 - see page 177.
On vehicles with a tyre repair kit 3, the
coupling ball bar is located in the left
stowage compartment beneath the floor
cover in the luggage compartment - see
page 166, Fig. 17923 S.
9 Wa rning
Disreg ard of these notes ca n lead to
injuries which may be fatal. Vehicle
pass enge rs must b e informed
accordingly.
9 Warning
Disregard of these notes can lead to
injuries which may be fatal. Vehicle
passengers must be informed
accordingly.
9 Warning
The coupling ball bar is to be removed
when not towing.
164 Drivin g and Opera tion
Picture no: 15271s.tif
Fitting the c oupling b all ba r
Fold down the socket. Remove the sealing
plug from the hole for the coupling ball bar
and stow it in the luggage compartment.
Picture no: 12416t.tif
Checking the tensioning of the coupling
ball bar:
z Red marking on turn knob points
towards white marking on coupling ball
bar.
z Gap of a pprox. 4 mm be tween turn k nob
and coupling ba ll bar.
z Key is in lock at position 1.
Picture no: 12417t.tif
Otherwise, the coupling ball bar must be
tensioned before it is inserted into the
coupling housing:
z Unlock coupling ball bar (key to
position 1) see Fig. 12416 T.
z Pull turn knob out and turn it forwards as
far as it will go see illustration a bove.
165Driving an d Operation
Picture no: 12418t.tif
Inserting the coupling ball bar:
Insert the tensioned coupling ball bar into
the coupling housing and push firmly
upwards until the coupling ball bar
enga ges in position.
The turn knob snaps back into its home
position resting against the coupling ball
bar.
Picture no: 16484s.tif
Lock coup ling ball bar (key to p osition 2
see page 164, Fig. 12416 T). Remove key
and press protective flap into position.
When the coupling ball bar is locked, the
turn knob can no longer be pulled out.
Important
Check that the coupling ball bar is correctly
insta lled:
z Green marking on turn knob points
tow ards white marking on coupling ball
bar.
z No gap between turn knob and coupling
ball bar.
z Coupling ball bar must be seated firmly
in coup lin g hous ing.
z Coupling ball bar must be locked and
key must be removed.
Eye for break-away stopping cable
For trailers w ith brakes, attach break-a way
stopping cable to rear tow ing eye
see arrow in Fig. 16484 S.
9 Wa rning
Do not touch the turn knob when
inserting the coup ling ball bar - risk of
in j u ry.
9 Warning
Towing is permitted only with a correctly
fitted towbar. If the towbar cannot be
fitted correctly, contact a workshop.
166 Drivin g and Opera tion
Picture no: 13670t.tif
Dismounting the coupling b all ba r
Unlock coupling ball bar (key to position 1
see page 164, Fig. 12416 T).
Pull turn knob out and turn it forwards as
far as it will go. Remove c oupling ball bar
downwards out of coupling housing.
Fold away the socket see page 164,
Fig. 15271 S.
Insert the sealing plug in the hole for the
coupling ball bar.
Do not use steam-jet cleaners or other
high-pressure cleaners to clean the
coupling ball bar.
Picture no: 17923s.tif
Stowa ge of coupling b all b ar
Plac e coupling ball bar in bag, as show n on
page 163 in Fig . 14195 S, and attach next
to vehicle tools, beneath the spare wheel.
On vehicles with a tyre repair kit 3 , the
coupling ball bar is stored in the left
stowage compartment beneath the floor
cover in the luggage compartment - see
illustration above.
Caravan / trailer towing
C arava n and tra iler loads
1)
The permissible caravan / trailer loads are
vehicle-dependent and engine-dependent
maximum values which must not be
exceeded. The actual caravan / trailer load
is the difference between the actual gross
weight of the caravan / trailer and the
actual coupling socket load with the
caravan / trailer coupled.
When the caravan / trailer load is being
checked, therefore, only the caravan /
trailer wheels – and not the jockey wheel
must be sta nding on the weighing
apparatus.
The permissible caravan / trailer loads for
your vehicle are specified in the vehicle
documents. Unless otherwise specified,
they are valid for gradients up to
max. 12%.
1)
Observe national regulations.
167Driving an d Operation
The permissible caravan / trailer load
should be fully utilised only by drivers who
are adequately experienced in towing
large or heavy caravans / trailers.
The permitted caravan / trailer load
applies up to the specified incline and up to
an altitude of 1000 metres above sea-level.
Since engine power decreases as altitude
increases because of the air becom ing
thinne r, there fore reducing climbing ability,
the permitted towing weight also
decreases by 10% for every 1000 metres of
additional altitude. The towing weight
does not have to be reduced when driving
on roads with slight inclines (less than 8%,
e.g. motorways).
The actual caravan / trailer load plus the
actual gross weight of the towing vehicle
must not exceed the maximum permitted
towing weight. For example, if the
permitted Gross Vehicle Weight is utilised,
the caravan / trailer load must only be used
until the maximum permitted towing
weight is reached. The maximum
permitted towing weight is shown on the
identification plate – see page 206.
Coupling soc ket load
The coupling socket load is the load
exerted by the caravan / trailer on the
coupling ball. It can be varied by cha nging
the weight distribution when loading the
caravan / trailer.
The maximum permissible coupling socket
load (55 kg) of the towing vehicle is
specified on the towing equipment
identification plate and in the vehicle
documents. This must always b e comp lied
with, particularly in the case of heavy
caravans / trailers. The coupling socket
loa d should be no less than 25 kg.
When m easuring the coupling socket load,
make sure that the drawbar of the loaded
caravan / trailer is at the same height as it
will be when the c aravan / trailer is coupled
with the towing vehicle loaded. Particularly
important for caravans / trailers w ith
tandem axle.
Rear a xle load during t owing
With the caravan / trailer connected and
the towing vehicle fully loaded, including
all occupants, the permitted rear axle load
(specified on identification plate and
vehicle documents) may be exceeded by
no more than 25 kg, and the maximum
permitted Gross Vehicle Weight by no more
than 30 kg.
If the maximum permitted rear axle load is
exceeded, a maximum speed of 60 mph
(100 km/h) applies, and 50 mph (80 km/h)
for commercial vehicles. Slower national
maximum speed limits for towed vehicles
must be complied with.
168 Drivin g and Opera tion
Picture no: 9358t.tif
Tyre pr essure
On the towing vehicle, increase the tyre
pressure to the value given for full load –
see page 216. Also check tyre pressures of
the trailer wheels and the spare whee l 3.
Picture no: 12421t.tif
Driving characteristi cs, towing tips
In the case of caravans / trailers with
brakes, attach the break-away stopping
cable to the eye (arrow in illustration).
Before attaching the caravan / trailer,
lubricate the ball of the cara van / trailer
towing device. How ever, do not lubricate
the ball if a stabiliser, which acts on the
coupling b all, is being used to damp
snaking.
Check caravan / trailer lighting before
starting to drive. The fog tail light on the
vehicle is deactivated when towing a
caravan or trailer.
Caravan / trailers with LED turn signals
must have a provision that makes it
possible to monitor standard light bulbs.
Turn signal control indicator - see page 86.
Handling is greatly influenced by the
loading of the caravan / trailer. Load s
should therefore be secured so that they
cannot slip , and should be placed in the
centre of the caravan / trailer if possible,
i.e. above the axle.
In the case of caravans / trailers with low
driving stability, do not exceed a speed of
50 mph (80 km/h); the use of a friction-type
stabiliser is strongly recommended.
Do not drive faster than 50 mph (80 km/h)
if possible, even in countries where higher
speeds are permitte d.
Make s ure th at y ou ha ve enoug h room
when cornering and avoid sudden
manoeuvres.
If the caravan / trailer starts to sway, drive
more slowly, do not attempt to correct the
steering and brake sharply if necessary.
If it is necessary to apply the brakes fully,
depress the footbrake as hard as possible.
Remember that the braking d istance for
vehicles towing caravans / trailers with and
without brakes is always greater than that
for vehicles not towing a caravan / trailer.
169Driving an d Operation
When driving downhill, the brakes are
under considerab ly m ore load when towing
a caravan / trailer. For this reason, drive in
the same gear as if driving uphill and drive
at a similar speed.
In Automatic mode, the Easytronic 3
automatically selects the drive programme
with optimum engine braking effect.
The cooling fan is electrically operated. Its
cooling power is therefore independent of
the engine speed.
Since a considerable amount of heat is
generated at high engine speeds and less
at slower speeds, do not shift down when
climbing hills while the vehicle is still coping
with the gradient in the higher gear.
Diesel engines: On gradients of 10% or
more, do not drive faster than 20 mph
(30 km/h) in first gear or 30 mph (50 km/h)
in second gear.
Picture no: 14196s.tif
Start ing on inclines
For vehicles with manual transmission, the
most favourable engine speed when
starting-off on an incline is between 2500
and 3000 rpm for petrol engines and
between 2000 and 2500 rpm for diesel
engines. Hold engine speed constant,
engage clutch gradually (let slip), release
ha ndb ra ke and open throttle. If possible,
the engine speed should not drop during
this procedure.
For vehicles with Easytronic 3 in Automa tic
mode, simply apply full gas.
Before starting-off under extreme
conditions (high combination weight,
mountainous terrain with steep inclines),
switch off all unnecessary electrical loads
(e.g. heated rear window, air conditioning
system 3, heated front seats 3 ).
170 Self-help, Vehicle Care
Self-help,
Vehicle Care
Diesel fuel system, bleeding
Never let the tank run dry!
If control indicator Y illuminates, refuel as
soon as possible. Refuel immediately if it
flas hes .
Restarting after running out of fuel is
possible, but starting behaviour will be
delayed. Turn on the ignition three times
for 15 seconds each time. Then start the
engine for a maximum of 40 seconds
1)
.
If it does not start, repeat the p rocess after
waiting at least 5 seconds. If the engine still
does not start, contact a workshop.
Picture no: 16109s.tif
Bonnet
To open the bonnet, pull the release lever
located on the driver’s side below the
instrument panel. The bonnet will then be
unlocked and will partially open. Return
release lever to its original position.
Diesel fuel system, bleeding ..... .......... 170
Bonnet ............................... ............. ...... 170
Starting ............ ............................... ...... 171
Starting the engine with jump leads 3 172
Towing the v ehicle......................... ...... 173
Towing another vehicle......... .............. 175
Warning triangle ¨ 3,
First-aid kit +3................... .............. 176
Jac k £ and vehicle tools 3 ................ 176
Spare wheel 3 ...... ............................... . 177
Changing wheels ..... ............................ 178
Tyre repair kit 3 ............................. ...... 182
Electrical system ........... ............. .......... 186
Fuses and the most important circuits
they p rotect ............................. .......... 188
Bulb replacem ent ............................... . 190
Halogen headlight system .................. 191
Halogen headlight system 3,
Adaptive Forward Lighting (AFL) 3 193
Xenon headlight system .. ............. ...... 193
Parking lights ........... ............................ 195
Front turn sig nal lights .............. .......... 196
Front fog lights 3 .......... ....................... 196
Tail lights ........................... ............. ...... 197
Numb er plate light .. ............................ 198
Courtesy lig hts ......... ............................ 200
Vehicle care.......... ......... ....................... 202
9 Warning
Disregard of these notes can lead to
injuries which may be fatal. Vehicle
passengers must be informed
accordingly.
1)
With engine Z 17 DTH:
For techn ical reasons, only possible for
30 secon ds. Sales designation - see page 209 .
171Self-help, Vehicle Care
Picture no: 17883s.tif
A re le ase le ve r is loca te d b e h i nd t h e
radiator grille just right of centre – as
viewed from the front.
To open, pull lever and raise bonnet.
Any dirt or snow on the bonnet can slide
down towards the windscreen when the
bonnet is opened and block the air intake
see page 131.
Picture no: 14733s.tif
To hold the bonnet in the open position,
insert the support rod located at right
angles above the radiator grille into the
small slot in the underside of the bonnet.
Before closing bonnet, press support rod
firmly into its retainer. Lower the bonnet
gradually and then allow it to fall into the
lock under its own weight.
Check that the bonnet is locked in position
by pulling at its front edge. If it is not
engaged, repeat the procedure.
Starting
Do not sta rt wit h quick charger
This prevents damage to electronic
components.
Do not start by pushing or towing
Because your vehicle is fitted with a
catalytic converter, it must not be started
by pushing or towing – see page 145.
The v ehicle can only be started using jum p
leads – see following page.
172 Self-help, Vehicle Care
Starting the engine with jump
leads 3
A vehicle with a discharged battery can be
started using jump lead s and the battery of
another vehicle.
Attempts to start the vehicle should be
made at intervals of one minute and
should not last longer than 15 seconds.
Picture no: 15286a.tif
z Never expose the battery to naked
flames or sparks.
z A discharged battery can freeze at a
temperature of approx. 0 °C. Alwa ys
thaw a frozen battery in a warm room
before connecting jump leads.
z Do not allow battery fluid to come into
contact with eyes, skin, fabrics or
painted surfaces. The fluid contains
sulphuric ac id which can cause injuries
and damage in the event of d irect
contact.
z Wear eye protection and protective
clothing when handling a battery.
z Use auxiliary battery with same voltage
(12 volts). Its capacity (Ah) must not be
considerably less than that of the
discharged battery. Voltage and
capacity information can be found on
the batteries.
z Use jump leads with insulated terminals
and a cross section of at least 16 mm
2
(25 mm
2
for diesel engines).
z Do not disconnect the discharged
battery from the vehicle.
z Switch off all unnecessary electrical
consumers.
z Do not lean over the ba ttery during jump
starting.
z Do not allow the terminals of one lead to
touch those of the other lead.
z Do not touch the vehicles while jump
starting.
z Apply handbrake. Manual transmission
in neutral (Easytronic 3 in position N).
9 Wa rning
Be extrem ely careful when starting with
jump leads. Any deviation from the
following instructions can lead to injuries
or damage caused by battery explosion
or damage to the e lec trical syste ms of
both vehicles.
173Self-help, Vehicle Care
Picture no: 16485s.tif
Connect the lea ds in the order shown in the
illustration:
1. Connect one end of the first jump lead to
the positive terminal 1 of the battery
providing the jump start (identified by
"+" sign on battery case or terminal).
2. Connect the other end of this lead to the
positive terminal 2 of the discharged
battery ("+" sign).
3. Connect the first end of the other jump
lead to the negative terminal 3 of the
battery providing the start ("–" sign).
4. Connect the other end of the second
ju mp l ead 4 to ground on the other
vehicle, e.g. e ngine block or scre w
connection in the engine suspension.
z Do not connect leads to negative
terminal of discharged battery!
z The connection point should be as far
away from the discharged battery as
possible.
z Route the leads so that they cannot
catch on rotating parts in the engine
compartment.
z Start the engine of the vehicle providing
the jump start.
z After 5 minutes, start the other engine.
Start attempts should be made at
intervals of 1 minute and should not last
longer than 15 seconds.
z After starting, allow both engines to idle
for approx. 3 minutes with the leads
connected.
z In order to avoid excess voltage in the
electrical system, before removing a
lead, switch on an electrical consumer
(e.g. light, heated rear window) in the
vehicle receiving the jump start.
z Reverse above sequence exactly whe n
removing leads.
Picture no: 17896s.tif
Towing the vehicle
To open the cap of the front right towing
eye, disengage the bottom of the cap and
pull downwards to remove.
174 Self-help, Vehicle Care
Picture no: 14198s.tif
The towing eye is located in the vehicle tool
bag 3 in the luggage compartment
bene ath the spare wheel 3 - see illustration
above - or, for model variants with a tyre
repair kit 3, in a stow age compartment
beneath the floor cover - see page 177,
Fig. 17918 S.
Spare wheel 3 see page 177.
Tyre repair kit 3 see page 182.
Jac k and vehicle tools 3 see page 176.
Picture no: 17897s.tif
Screw in the towing eye anticlockwise as far
as it will go until it stops in a horizontal
position.
Attach a tow rope 3or better still a
tow rod 3 to the eye.
The towing eye must only be used for
towing and not recovering a vehicle.
Switch on ignition to release steering
colum n lock and t o pe rmit o p e ra tion of
brake lights, horn and windscreen wiper.
Manual transmission in neutral,
Easytronic 3 in position N.
Drive slowly. Do not drive jerkily. Excessive
tractive force can damage the vehicle.
To prevent the entry of exhaust fum es from
the tow ing vehicle, switch on the air
recirculation 3 and close the windows.
Contact a workshop who will provide a
reliable, fa st and professional repair.
9 Warning
For braking and steering, significantly
hig her forces are required:
Brake assistance and steering assistance
are effective only with the engine
running.
175Self-help, Vehicle Care
If the automatic clutch is released
manually after a power failure on vehicles
with Easytronic 3, towing is not permitted,
see page 137. In this case, contact a
workshop immediately.
After towing, unscrew towing eye by
rotating clockwise and insert and close the
cap.
Towing service
Entrust your vehicle only to the towing
service of your choice and obtain an
estimate on towing costs before employing
any towing service. In this way you avoid
unnecessary costs and possible insurance
problems during claim processing .
Picture no: 14199s.tif
Towing another vehicle
Attach a tow rope 3or better still a
tow rod 3 to the rear towing eye on the
right side of the vehicle underbody, but
never to the rear axle.
Drive slowly. Do not drive jerkily. Excessive
tractive force can damage the vehicle.
Picture no: 17898s.tif
On some model variants, the towing eye is
located behind a cover 3.
Slacken the screw a quarter turn with a
screwdriver 3 (see illustration) and remove
the cover.
The tow ing eye must only be used for
towing and not recovering a vehicle.
Drive slowly. Do not drive jerkily. Excessive
tractive force can damage the vehicle.
After towing, fit cover and secure with
screw.
176 Self-help, Vehicle Care
Picture no: 16140s.tif
Warning triangle ¨ 3,
first-aid kit +3
The warning triangle and first-aid kit
(cushion) are strapped with a rubber band
in the stowage compartment on the
left-hand side of the luggage
compartment, beneath the floor covering.
Picture no: 14201s.tif
To op en, remove the luggage
compartment cover 3 – see page 54, lift
the floor us ing the ha ndle and raise
towards the front.
Picture no: 14203s.tif
Jack £ and veh icle to ols 3
The jack and the vehicle tools have been
specially developed for your vehicle and
must only be used on that vehicle. Only use
jack for cha nging wheels.
The jack and vehicle tools are stowed in a
bag und erneath the spare wheel 3 in the
luggage compartment.
177Self-help, Vehicle Care
Picture no: 17918s.tif
For vehicles with a tyre repair kit 3, the
tools a re stowed together with the tyre
repair kit in the stowage compartment
beneath the floor cover in the luggage
compartment.
Spare wheel 3
Some vehicles are equipped with a tyre
repair kit instead of a spare wheel.
See page 182.
Picture no: 16141s.tif
The spare wheel is in a recess in the floor of
the vehicle and is screwed down with a
wing nut.
To access the spare wheel, remove the
lugg age compartment cover 3 – see
page 54, lift the floor c over using the
handle and raise towards the front. Fold
the spare wheel cover up towards the front.
Stowing standard size tyres in the spare
wheel well
The spare wheel well is not designed for all
size s of comme rcia lly availab le tyre s. If a
larger wheel must be stow ed in the spare
wheel well after changing wheels, place the
floor cover on the overlaying wheel.
General inform ation
Depending on the model variant, the sp are
wheel may be in the form of a temporary
spare wheel 3. Refer to the notes on this
page and pages 162, 216.
On vehicles with alloy wheels 3, the spare
wheel may have a steel rim.
If y ou use win ter tyres 3, the spare wheel
ma y still be fitted with a summer tyre. If y ou
use the spare wheel, the v ehicle’ s handling
may be altered. Obtain a replacement for
the faulty tyre as soon as possible, and
have the wheel balanced and fitted to the
vehicle.
The spare wheel may have a smaller tyre
and a smaller rim than the wheels mounted
on the vehicle
1)
: Using the spare wheel may
alter the driving behaviour of the vehicle.
Have the defective tyre replaced as soon
as possible, balance the wheel and have it
mounted on the vehicle.
1)
Country-specific version:
In some countries, the spare wheel may only
be used as a temporary spare wheel.
178 Self-help, Vehicle Care
Notes on tempor ary spa re wheel 3
z If the temporary spare wheel is used, the
handling of the vehicle may change,
particularly if winter tyres 3 are being
used .
z The Electronic Stability Program
ESP®
Pl us
3 m ay sw i tc h itse lf off.
z Replace defective tyres as soon as
possible, balance wheel and fit to
vehicle.
z Fit only one temporary spare wheel.
z Do not d riv e faster than 50 mph
(80 km/h).
z Ta ke c urv es slowly .
z Do not use the tem porary spare wheel
for a lengthy period.
z Replace tempora ry spare wheel with full
specification w heel without delay.
z Ty re ch ains 3 are not perm itted on the
temporary spare wheel. If tyre cha ins
have to be used after a front wheel
puncture, fit temporary spare wheel to
the rear axle and fit a rear wheel to the
front axle. Check tyre pressure and
correct if necessary, see page 216.
z Note the information on the temporary
spare wheel on pages 162, 216.
Notes on directional tyres 3
Directiona l tyres only achieve their full
performance potential when mounted in
the prescribed direction of rotation. If, after
a flat tyre, the tyre or spare wheel is
mounted against the prescribed direction
of rotation, observe the following:
z Driving conditions may be altered.
Replace the defective tyre as soon as
possible, balance the wheel and mount it
on the v ehicle.
z Do not drive faster than 50 mph
(80 km/h).
z Drive especially carefully in wet or snowy
weather.
For further information on directional
tyres – se e p age 158.
Changing wheels
There may be a tyre repair kit instead of a
spare wheel – see page 182.
To ensure your safety, make the following
preparations and observe the following
inform ation when changing wheels:
z Park the vehicle on a level, firm and non-
skid surface .
z Switch on the hazard warning lights,
apply the handbrake, eng age first gear
or reverse gear (Easytronic 3 in
position N or R).
z Correctly set up the warning triangle.
Warning triangle see page 176.
z Remove spare wheel from luggage
compartment, see previous page.
z Before raising the vehicle, set the front
wheels to the straight-ahead position.
z Never change more than one wheel
at a time.
179Self-help, Vehicle Care
z Block the wheel diagonally opposite the
wheel to be changed, by placing wedge
bloc ks or equivalent in front and behind
th e whee l.
z Use the jack 3 only to change wheels.
z If the ground on which the vehicle is
standing is soft, a solid b oa rd (max. 1 cm
thick) should be placed under the jack 3.
Using a thicker board could damage the
ja ck and the vehicle.
z No people or animals may be in the
vehicle when it is jacked up.
z Never crawl under a jacked-up vehicle.
z Do not start or run the engine while the
vehicle is on the jack.
z Before inserting the wheel bolts when
cha nging wheels, lightly grease the cone
of each bolt. For this reason, carry some
conventional grease.
Picture no: 14204s.tif
1. Remove the wheel trim using the hook 3
found with the vehicle tools. Vehicle
tools - see page 176.
If the wheel trim has visible wheel
bolts 3, the trim can remain on the
wheel. The retaining washers 3 on the
wheel bolts must not be removed.
Picture no: 11721s.tif
Alloy wheels 3:
Prise off the hub cap by inserting a
screwdriver 3 in the rec ess at the side of
the hub cap. Protect the rim by placing a
soft cloth between the screwdriver and
the alloy wheel.
Remove wheel bolt caps 3 from wheel
bolts.
6
180 Self-help, Vehicle Care
Picture no: 11642s.tif
Alloy wheels with anti-theft lock 3:
Unscrew hub cap using key included in
vehicle tools 3 and remove it.
Picture no: 11643s.tif
2. Slacken wheel bolts using wheel bolt
wrench 3, putting on the wheel bolt
wrench 3 as far as possible.
Picture no: 14724s.tif
3. The jacking points on the vehicle
underbody are marked by depressions
on the lower body sill.
181Self-help, Vehicle Care
Picture no: 14762s.tif
4. Before positioning the jack 3, set it to the
necessary height by rotating the eye by
hand. Position the jack arm at the front
or rear so that the ja ck claw (see arrow in
illustration) spans the vertical base and
grip s in the rece ss in the vertical base .
Make sure it is properly positioned.
With VXR 3 and VXR Line 3, the jack 3
must not be used, since the vehicle may
be damaged. Consult a workshop.
Picture no: 14763s.tif
The ed ge of the jack base must be on the
ground directly below the jacking point,
in a manner that prevents it from
slipping.
Raise vehicle by turning crank handle.
If this is not the case, carefully lower the
vehicle immediately and reposition the
jack.
5. Unscrew wheel bolts and wipe clean with
a cloth. Then apply a light coating of
grease to the wheel bolts. Do not grease
the thread of the bolts. Do not put the
wheel bolts down in a location where
they may become soiled.
Picture no: 11647s.tif
If the wheel bolts have retaining
washers 3, they must not be removed.
6. Change the wheel. Notes on spare
wheel – see page 177, notes on
temporary spare wheel – see page 178.
7. Screw in wheel bolts and tighten slightly,
inserting the wheel bolt wrench 3 as far
as possible.
8. Lower vehicle.
9. Tighten wheel bolts crosswise, putting on
wheel bolt wrench 3 as far as possible.
6
182 Self-help, Vehicle Care
10. Before refitting the whee l trim, clea n the
wheel around the retaining clips. The
valve symbol 3 on the back of the
wheel trim must point toward s valve on
wheel.
Align and refit wheel trim or wheel bolt
caps 3.
Alloy wheels 3:
Put hub cap on and engage, inserting
pin on rear of hub cap into relevant hole
in wheel.
Alloy wheels with anti-theft lock 3:
Put hub cap on. Insert and tighten
anti-theft lock 3.
11.Stow the replaced wheel, vehicle tools
and warning triangle -
see pages 176, 177.
12. Check the tyre inflation pressure of the
newly fitted wheel. Adjust as necessary.
13. Have the tightening torque of the whe el
bolts on the new wheel checked on the
ve hicle usin g a torque wre nc h as soon
as possible a nd, if nece ssary, corrected.
Tightening torquesee page 216.
14. Replace the faulty tyre on the wheel
that was removed.
15. Replace temporary spare wheel 3 with
a full specification wheel without delay.
Tyre repair kit 3
Minor damage to the tyre tread and
sidewall, e.g. foreign bodies, can be
remedied with the tyre repair kit.
Do not remove the foreign body from the
tyre.
Tyre damage exceeding 4 mm or that is on
the rim cannot be repaired with the tyre
repair kit.
Important informationsee page 185.
In the event of a fla t tyre:
z Switch on hazard warning lights and
apply handbrake. In vehicles with
manual transmission, select 1st gear or
reverse gear (Easytronic 3 in
position N or R).
z Correctly set up the warning triangle.
Warning tria ngle – see page 176.
Picture no: 17919S.tif
The tyre repair kit is in a stowage
compartment beneath the floor cover in
the luggage compartment.
1. Remove ba g containing tyre repair kit
from stowage compartment. Carefully
remove parts from bag.
2. Remove the compressor.
9 Warning
Driving with tyre pressures that are too
low or deflated tyres can cause invisible
damage to the tyre. This damage cannot
be eliminated with a tyre repair kit. Park
the vehicle and contact a workshop.
183Self-help, Vehicle Care
Picture no: 13639T.tif
3. Remove the electrical connection cable
and air hose from the stowage
com partments on the underside of the
com pressor.
Picture no: 15319t.tif
4. Screw the air compressor hose to the
connection on the sealant bottle.
5. Fit the sealant bottle in the retainer on
the compressor.
Set the compressor near the tyre in such
a way that the sealant bottle is upright.
6. Re move the valv e cap from the de fective
tyre.
Picture no: 15795t.tif
7. Screw the filler hose to the tyre valve.
8.The switch on the compressor must be
se t to §.
9. Plug the compressor connector into the
accessory socket or the cigarette lighter
socket. For accessory sockets, see
page 79.
184 Self-help, Vehicle Care
Picture no: 15796t.tif
10. Switch on ignition.
11.Set the rocker switch on the
compressor to I. The tyre is filled with
sealant.
12. While the sealant bottle drains
(approx. 30 seconds) the pressure
indicator on the compressor briefly
points to 6 bar (87 psi). Pressure then
sinks aga in.
13. All of the sealant is pumped into the
tyre. Afterwards, the tyre is filled with
air.
14.The prescribed tyre pressure see
page 216, should be reached within
10 minutes. Switch off the comp ressor
when the correct pressure is obtained.
Picture no: 15797t.tif
If the specified tyre pressure is not
reached within 10 minutes, remove the
tyre repair kit. Move the vehicle through
one tyre rotation, approx. 2 metres, in
either direction. Reconnect the tyre
repair kit and continue the filling
process for 10 minutes. If the specified
tyre pressure is still not reached, the tyre
is too badly damaged. Park the vehicle
and contact a workshop .
Drain excess tyre pressure with the
button over the pressure indicator.
Do not run the compressor for more
than 10 minutes, see "Important
information" on page 185.
15. Detach the tyre repair kit. Screw the
filler hose to the free connection on the
sealant bottle. This prevents sealant
leakage. Stow the tyre repair kit in the
luggage compartment.
16. Wipe away any sealant spill with a
cloth.
17. Dismantle the warning triangle and
stow it in the luggage compa rtment
see page 176.
18. The provided sticker shows the
max imum permitted speed at which the
vehicle may be driven after a tyre repair
has been made. Affix sticker in driver’s
field of v iew.
19. Continue driving im mediately to a llow
the sealant to distribute evenly
throughout the tyre. Stop after approx.
6 miles (10 km) or no more than 10
min utes , a nd chec k ty re pr essure. S crew
the air compressor hose directly onto
the tyre valve (see Fig. 15798 T on next
page).
185Self-help, Vehicle Care
Picture no: 15798t.tif
As long as the tyre pressure is more
than 1.3 bar (19 psi) it may be adjusted
to the prescribed value. Repeat the
procedure until there is no more
pres sure loss.
If the tyre pressure has fallen below
1.3 bar (19 psi), the vehicle may no
longer be used. Contact a workshop.
20. Stow the tyre repair kit in the luggage
compartment see page 182.
Imp or tant
The driving comfort of the repaired tyre is
severely affe cted, therefore ha ve this tyre
replaced.
If the comp ressor ma kes abnormal noises
or hea ts up greatly , switch it off for at least
30 minutes.
The integrated safety valve opens at a
pressure of 7 bar (102 psi).
Protect the compressor from moisture and
ra in.
The sealant can only be stored for
approx. 4 years. After this time, the sealing
properties can no long er be guaranteed.
Heed the expiration date on the sealant
bottle.
The sealant bottle can only be used once.
Replace a used sealant bottle.
The compressor and sealant can be used
from app rox. -30 °C.
Dispose of a used tyre repair kit in
accorda nce with applicable legisla tion.
An adapter for filling air mattresses, inner
tubes, etc. is located on the underside of
the compressor. Remove by unscrewing the
air compressor hose and pulling out the
adapter.
9 Warning
Do not drive faster than 50 mph
(80 km/h).
Do not use the temporary spare w heel for
a lengthy period.
Steerability and driving b ehaviour may
be impaired.
Have the repaired tyre repla ced as soon
as possible.
186 Self-help, Vehicle Care
Electrical system
Fuses
In the ve hicle, there are two fuseboxes:
one in the vehicle interior, below the
instrument panel, and a nother in the
engine bay, in front of the windscreen.
Picture no: 14725s.tif
We recommend carrying a complete set of
fuses.
Put spare fuses in the p rov id ed loca tion in
the fusebox in the instrument panel
(marked in yellow in the illustration). Open
cover – see page 188.
Before replacing a fuse, turn off the
respective switch and the ignition.
9 Wa rning
Electronic ignition systems generate very
high voltages. Do not touch the ignition
system; high voltage can be fatal.
187Self-help, Vehicle Care
Picture no: 12892j.tif
A defective fuse can be recognized b y its
melted wire. A new fuse should only be
installed after the cause of the trouble has
been rectified.
To help in replacing fuses, there is a special
fuse-gripping tool in the fusebox 3.
Slot fuse-gripping tool onto fuse and
withdraw it.
Alw ays use fuses with the specified rating.
This is shown on each fuse, and is also
indica ted by the fuse colour and the plug-
in location in the fusebox.
Fus e Fuse
colour rating
Grey 2 A
Brow nis h ye llow 5 A
Brown 7.5 A
Red 10 A
Blue 15 A
Yellow 20 A
Light green 30 A
Pink (Maxi-Fuse) 30 A
Orange 40 A
Red (Maxi-Fuse) 50 A
Yellow (Maxi-Fuse) 60 A
Black (Maxi-Fuse) 80 A
188 Self-help, Vehicle Care
Picture no: 14211s.tif
Fuses a nd the m ost importan t
circuits they protect
Fusebox in passenger compa rtment
Disengage fusebox cover at bottom and
remove.
Some circuits may be protected by several
fuses.
No. C ircuit Rating
1 Central control unit 7.5 A
2 Immobiliser,
hazard warning lights,
exterior lighting
5 A
3 Headlight wash system 30 A
No. Circ uit Rat ing
4 Infota inment system,
diesel engine
20 A
5 ––
6 ––
7 Starter,
diesel engine:
engine controller
10 A
8 Horn 15 A
9 Fuel injection system,
fuel pump,
sta tionary heater
20 A
10 Turn signal lights 20 A
11 Infota inment system,
Inform ation d isplay
20 A
12 Heated rear window,
exterior mirrors
7.5 A
13 Central locking,
Va ux ha ll alarm s ys tem
10 A
14 Engine control
Petrol engine:
Diesel engine:
15 A
7.5 A
15 Engine control unit,
Z 17 DTH engine
10 A
15 A
16 Accessory socket,
cigarette lighter
20 A
No. Circuit Rating
17 ––
18 Ada ptive Forward Lighting
(AFL)
15 A
19 Central locking system 20 A
20 Interior lighting,
reading light
5 A
21 Windscree n wash system 15 A
22 Rear electric windows 20 A
23 Slide / tilt sunroof,
skylight roof
20 A
24 Vauxhall alarm system 5 A
25 Rear window wiper 15 A
26 Ignition system,
engine electronics
15 A
27 Engine control,
a irb ags, ESP®
Plus
5 A
28 Air conditioning system 7.5 A
29 Front left electric window 20 A
30 ––
31 Engine control,
Z 17 DTH engine
7. 5 A
10 A
32 Front rig ht elec tric wind ow 20 A
189Self-help, Vehicle Care
No. C ircuit Rating
33 Central control module,
immobiliser,
control indicators
5 A
34 Windscreen wiper 30 A
35 Interior lighting,
interior mirror,
information display
5 A
36 Brake light, ABS, ESP®
Pl us
15 A
37 Cigarette lighter,
auxiliary heater
20 A
38 Seat heater (left) 15 A
39 Seat heater (right) 15 A
40 Adaptive Forward Lighting
(AFL),
automatic headlight ra ng e
adjustment
5 A
41 Reversing lights 15 A
Picture no: 14436s.tif Picture no:
No. Circ uit Rat ing
42 Engine cooling,
lighting
5 A
43 Left parking light 5 A
44 Right parking light 5 A
45 Fog tail light 10 A
46 Front fog lights 15 A
47 Towing equipm ent,
accessory socket
20 A
48 Diesel filter heater 30 A
49 ––
50 Diesel filter heater 30 A
No. Circuit Rating
51 Left dipped beam:
Xenon headlight
Halogen headlight
15 A
10 A
52 Right dipped beam:
Xenon headlight
Halogen headlight
15 A
10 A
53 Sunroof,
electric windows,
radio
5 A
54 Main beam (left) 10 A
55 Main beam (right) 10 A
56 ––
190 Self-help, Vehicle Care
Picture no: 14213s.tif
Fusebox in engine compartment
The fusebox is at the front of the engine
compartment, near the windscreen.
Disengage cover of fusebox from lug and
lift off.
Some circuits may be protected by several
fuses.
Picture no: 14214s.tif
The following fuses are Maxi fuses.
Bulb replacement
Before replacing a bulb, switch ignition off
and switch relevant switch off.
Only hold new bulb at base! Do not touch
the bulb glass with bare hands, otherwise
fingerprints on the glass evapora te.
Residue builds up on the reflector
eventually resulting in a dull reflector.
Inadvertently stained bulbs may be
cleaned with a clean non-fluffy cloth, using
alcohol or white spirits.
The replacement b ulb must be in
accordance with the data on the base of
the defective bulb. Do not exceed wattage
given on bulb base.
Headl ight ai ming
We recommend that headlight adjustment
be carried out by a workshop who will have
s pec ia l equip me n t.
When adjusting headlights, headlight
range adjustment must be set to 0.
9 Wa rning
Turn off engine before opening fusebox,
risk o f in jury.
No. Circ uit Rat ing
1 Interior fan 30 A
2 Electric Power Steering
(EPS)
50 A
3 ABS 40 A
4 Easytronic,
diesel preheating system
60 A
80 A
5 Heated rear window 30 A
6 Engine cooling 50 A
7 Starter 30 A
8 Engine cooling 40 A
191Self-help, Vehicle Care
Picture no: 16085s.tif
Halogen headlight system
Headlights with separate systems for
dipped beam 1 (bottom lights) and main
beam 2 (top lights).
Picture no: 16086s.tif
Dipped beam
1. Open bonnet and engage support.
2. To replace the bulb on the left-hand
side, remove the relay box.
To replace the bulb on the right-hand
side, remove the air hose from the air
filter.
3. Rotate the headlight protective cover
anticlockwise and remove.
Picture no: 16087s.tif
4. Press the bulb down in the hold er.
5. Remove bulb with connector from
reflector housing.
192 Self-help, Vehicle Care
Picture no: 16088s.tif
6. Detach plug connector from bulb base.
7. Fit connector onto new bulb, without
touching the glass.
8. Insert the bulb with connector so that
the lug engages in the recess in the
reflector.
9. Place headlight protective cover in
position and close.
10. Insert relay box after replacing bulb at
left-hand side.
After replacing the bulb on the right-
hand side, reattach the air hose to the
air filter and engage.
Picture no: 16089s.tif
Main beam
1. Open bonnet and engage support.
2. To replace the bulb on the left-hand
side, remove the relay box.
To replace the bulb on the right-hand
side, remove the air hose from the air
filter.
3. Rotate the headlight protective cover
anticlockwise and remove.
Picture no: 16090s.tif
4. Detach plug connector from bulb.
5. Disengage spring wire clip from
retaining lugs by moving it forwards
and swivel it aside.
193Self-help, Vehicle Care
Picture no: 16091s.tif
6. Remove bulb from reflector housing.
7. When fitting a new bulb , engage the
lugs in the recesses on the reflector
without touching the glass.
8. Engage spring wire clip, plug connector
onto bulb.
9. Place headlight protective cover in
position and close.
10. Insert relay box after replacing bulb at
left-hand side.
After replacing the bulb on the right-
hand side, reattach the air hose to the
air filter and engage.
Halogen headlight system 3,
Adaptive Forward Lighting
(AFL) 3
Halogen headlight system for dipped and
main beam in combination with curve and
turn lighting.
Picture no: 14222s.tif
Xenon headlight system
He adlights with se parate sy ste ms for
dipped b eam 1 (bottom lights) and main
beam 2 (top lights).
Dipp ed beam
9 Warning
We recommend having bulbs for dipped
beam, m ain beam, turn lighting, parking
lights and turn sig nal lights replaced by a
workshop only.
9 Warning
The dipped beam works with very high
electrical voltage. Do not touch, risk of
fatal injury. Have bulbs changed by a
workshop.
194 Self-help, Vehicle Care
Picture no: 14219s.tif
Main beam
1. Open bonnet and engage support.
2. Remove headlight protective cover.
Picture no: 14220s.tif
3. Detach plug connector from bulb.
4. Disengage spring wire clip from
retaining lug and swivel upward.
Picture no: 14221s.tif
5. Remove bulb from reflector housing.
6. When fitting a new bulb, engage the
lugs in the recesses on the reflector
without touching the glass.
7. Engage spring wire clip, plug connector
onto bulb.
8. Place headlight protective cover in
position and close.
195Self-help, Vehicle Care
Picture no: 16089s.tif
Parking lights
1. Open bonnet and engage support.
2. To replace the bulb on the left-hand
side, remove the relay box.
To replace the bulb on the right-hand
side, remove the air hose from the air
filter.
3. Turn the main beam headlight cover
cap anticlockwise and remove.
For vehicles with Xenon headlight
sy ste m 3, remove the headlight cover
cap – see page 194, Fig. 14219 S.
Picture no: 16092s.tif
4. Push side lugs of parking light holder
together and remove holder from
reflector.
Picture no: 16093s.tif
5. Remove bulb from socket.
6. Insert new bulb, without touching the
glass.
7. Insert bulb socket in reflector.
8. Place headlight protective cover in
position and close.
9. Insert relay box after replacing bulb on
left-hand side.
10. After replacing the bulb on the right-
hand side, reattach the air hose to the
air filter and engage.
196 Self-help, Vehicle Care
Picture no: 16094s.tif
Front turn signal lights
1. Open bonnet and engage support.
2. To replace the bulb on the left-hand
side, remove the relay box.
To replace the bulb on the right-hand
side, remove the air hose from the air
filter.
3. Rotate left turn signal light bulb carrier
and disengage.
Picture no: 16095s.tif
4. Remove bulb mounting from reflector.
5. Detach bulb from bulb mounting.
6. Insert new bulb into bulb m ounting,
without touching the glass.
7. Insert new bulb so that the two lugs on
the bulb mounting engage in the
recesses in the reflector.
8. Rotate bulb carrier to right as far as it
will go.
9. Insert relay box after replacing bulb at
left-hand side.
After replacing the bulb on the right-
hand side, reattach the air hose to the
air filter and engage.
Side turn signal lights
Have bulbs changed by a workshop.
Front fog lights 3
Have bulbs changed by a workshop.
197Self-help, Vehicle Care
Picture no: 17953S.tif
Tail lights
1. Unscrew the four screws from the bulb
housing using a screwdriver 3.
2. Pull bulb housing, reflector and fog tail
light out of retainers to rear.
Picture no: 17954S.tif
3. Disengage the p lug of the main bulb
mounting by pressing (arrow in
illustration) and pull from bulb
mounting.
4. Disengage lug of fog tail light plug (see
arrow in illustration) and remove.
Picture no: 17955S.tif
5. Slacken both screws on the back of the
main bulb mounting. Press the catches
of the bulb mounting together and
remove the bulb mounting.
6
198 Self-help, Vehicle Care
Picture no: 17956s.tif
Bulbs in ma in bulb mounting:
1 = Turn signal
2 = Brake light
3 = Tail light
4 = Reversing light
Remove bulb from socket.
Picture no: 17957s.tif
Fog tail light bulb:
Rotate bulb mounting anticlockwise and
disengage.
Remove bulb from socket.
6. Insert new bulb, being careful not to
touch the bulb glass, and engage the
bulb mounting in the bulb housing .
7. Retighten both screws on the back of the
main bulb mounting. Connect both
plugs. Insert bulb housing with retaining
pins to vehicle body and fasten housing
with the four screws.
Picture no: 17900s.tif
Number plate ligh t
1. Insert screwdriver 3 vertically on right-
ha nd side of bulb housing, ex ert p re ssure
tow ards the right and disengage spring.
Remove the bulb housing downwards.
199Self-help, Vehicle Care
Picture no: 14232s.tif
2. Rotate bulb holder to left and
disengage.
Picture no: 14233s.tif
3. Re move bulb from socket.
4. Insert new bulb, without touching the
glass.
5. Engage bulb holder by rotating right in
bulb housing. Insert bulb housing and
engage.
200 Self-help, Vehicle Care
Picture no: 11669s.tif
Courtesy lights
Front courtesy light, readi ng lights 3
To ensure that no power is supplied to the
lights, close the doors before removing.
1. Unclip the scatter disc on the housing at
the point shown in the illustration.
Picture no: 11670s.tif
2. Re move bulb from socket.
3. Insert new bulb, without touching the
glass.
4. Mount housing and engage in position.
Rear c ourtesy light,
rear read ing lights 3
Have bulbs changed by a workshop.
201Self-help, Vehicle Care
Picture no: 12927j.tif
Glov e com part ment light ,
lugg age compa rtment light
To ensure that no power is supplied to the
lights, close the doors or hold the contact
switch depressed before removing.
1 . Pris e th e light o u t wit h a s cr ewdr iv er 3
and remove.
Picture no: 12928j.tif
2. Press bulb slig htly towards spring c lip
and remove.
3. Insert new bulb, without touching the
glass.
4. Insert light in opening and engage in
position.
Instrum ent illumi na tion,
Inform ation d isplay illumi nation
Have bulbs changed by a workshop.
202 Self-help, Vehicle Care
Vehicle care
When caring for your vehicle, observe all
national environmental regulations,
particularly when washing it.
Regular, thorough care helps to imp rove
the appearance of your vehicle and
maintain its value over the years. It is also
a prerequisite for warranty claims for any
paint or corrosion dam age.
The following pages contain tips for vehicle
care which, if used properly, will help
combat the unavoidable damaging effects
of the environm ent.
Vehicle ca re aids 3
Vehicle wash:
z Wash brush,
z Car Shampoo,
z Car Sponges,
z Insect Removal Sponge,
z Chamois Leather,
z Wheel cleane rs,
z Engine cleaners,
z Glass cleaners.
Vehicle care:
z Paintwork Cleaner,
z Paintwork Polish,
z Metallic Paintw ork Wax,
z Hard wax,
z Touch-up pens,
z Touch-Up / Aerosol Paint,
z Wheel Preserve r,
z Insect Remover,
z Window Cleaning Spray,
z Vauxhall Windscreen Wash Solvent,
z Silicone Oil for Rubber Seals,
z Cleaner,
z Alloy Wheel Cleaner,
z Alloy Wheel Preserver,
z Rust Preventative.
Washing
The paintwork of your vehicle is exposed to
environmental influences, e.g. continuous
changes in w eather conditions, industrial
waste gases and dust or thawing salts, so
wash a nd wax your vehicle regularly . When
using autom atic car wa shes, select a
programme which includes waxing.
Bird droppings, dead insects, resin, pollen
and the like should be cleaned off
immediately, as they contain aggressive
constituents which can cause paint
damage.
If using a car wash, comply with the
pertinent instructions of the manufacturer
of the car wash. Windscreen wiper and rear
window wiper must be switched off, see
pages 11 and 12. Unscrew antenna 3 and
roof-mounted luggage carrier 3, stand on
door sill to reach them more ea sily.
If y ou wash your vehicle by hand, make
sure that the insides of the wings are also
thoroughly rinsed out.
Clean edges and folds on opened doors
and flaps as well as the areas they cover.
Thoroughly rinse off and leather-off the
vehicle. Rinse leather frequently. Use
sepa rate leathers for paint and window
surfaces: remnants of wax on the windows
will impair vision.
Observe national regulations.
203Self-help, Vehicle Care
Waxing
Wax your vehicle regularly, in particular
after it has been washed using shampoo,
and at the latest when water no longer
forms beads on the paintwork, otherwise
the paintwork will dry out.
Also wax e dge s and folds on opened doors
and flaps as well as the areas they cover.
Polishing
Polishing is necessary only if the paint has
become dull or if solid deposits have
become attached to it.
Paintwork polish with silicone forms a
protective film, making waxing
unnecessary.
Plastic body parts should not be treated
with wax and polish.
Use Metallic Paintwork Wax on vehicles
with a metallic-effect paint finish.
Wheels
Use a p H-neutral whee l clea ning a gent to
clean the whee ls.
Whe els are painted a nd can be treate d
with the same agents as the body. For alloy
wheels, we recommend use of Alloy Wheel
Preserver.
Paintwork damage
Repair m inor p aintwork damage such as
stone chips, scratches e tc. im mediately
using a touch-up pen or spray, before rust
forms. If rust has already formed, have a
workshop eliminate the cause. Also check
the surfaces and edges facing the road
surface on which rust may have developed
unnoticed for some time.
Exterior lights
Headlight and other protective light bezels
are made of plastic. If they require
additional cleaning after the vehicle has
been wa shed , clean them w ith C ar
Shampoo. Do not use any abrasive or
caustic agents, do not use an ice scraper,
and do not clean them dry.
Plastic and rubb er parts
If the car wash does not clean plastic and
rubber parts adequa tely, use cleaner
suita ble for vehicle interiors. Do not use any
other agent, and in particular do not use
solvents or petrol.
Wheels and tyres
Do not use high-pressure jet cleaners on
wheels and tyres.
204 Self-help, Vehicle Care
Interior and upholstery
Clean the vehicle interior, including the
instrument panel facia, using interior
cleaner.
The instrument panel should only be
cleaned using a soft damp cloth.
Clean fabric upholstery with a vacuum
cleaner and brush. To remove stains, use
cleaner that is suitable for both fab rics and
vinyl.
Do not use cleaning agents such as
acetone, tetrachloride, paint thinner, paint
remover, nail varnish remover, washing
powder or bleach. Petrol is also unsuitable.
Open Velcro fasteners on clothing could
damage seat upholstery. Make sure that
Velcro fasteners are closed.
Seat belts
Alw ays keep seat belts clean and dry.
Clean only with lukewarm water or Cleaner.
Wi nd ows
Whe n cleaning the he ated rear w indow,
make sure that the heating element on the
inside of the window is not damaged.
Use a soft lint-free c loth or cham ois leather
in conjunction with Window Cleaning Spray
and Insect Remover.
Vauxhall Windscreen Wash Solvent is
suitable for defrosting w indows.
For mechanical removal of ice, use a
commerc ially available sharp-edged ice
scraper. Press the scraper firmly against
the glass so that no dirt can get under it
and scra tch the glass.
Windscreen wiper blades
Wax, such as that used in car w ashes, can
cause streaking on the windscreen when
the wiper is used.
Smearing wiper blades can be cleaned with
a soft cloth and Vauxhall Windscreen
Wash Solvent, and replaced if necessary
see page 233.
Locks
The locks are factory-lubricated with a high
quality lock cylinder grease. This prevents
the locks from freezing. Only use de-icer in
urgent c ase s as this de stroys the grease
and damages the func tion of the locks.
After using de-icer, have a workshop
regrease the locks.
205Self-help, Vehicle Care
Eng ine compar tment
Look after areas in the engine
compartment that are painted in the same
colour as the vehicle like any other
paintwork.
It is adv isable to wash the engine
compartment before and after winter and
preserve it with wax. Before engine
washing, cover alternator and brake fluid
reservoir with plastic sheeting.
When washing the engine with a steam-jet
cle ane r, do not d ire ct the ste am jet at
components of the Anti-lock Brake
System (ABS), the automatic air
conditioning system 3 or the b elt drive and
its components.
Engine washing also rem oves subsequently
applied protective wax. Therefore after
washing, have a workshop protect the
engine, parts of the braking system in the
engine bay, axle elements with steering,
body elements and cavities, thoroughly
with protective wax.
An engine wash can be performed in the
spring in order to remove dirt that has
adhered to the engine compartment,
which may also have a high salt content.
Check protective wax layer and make good
if necessary.
Do no t use high -press ure jet clea ne rs in the
engine compartment.
Underbody
Your vehicle has a factory-applied PVC
undercoating in the wheel arches
(including the longitudinal mem bers) which
provides permanent protection and needs
no special maintenance. The surfaces of
the vehicle underbody not covered by PVC
are provided with a durable p rotective wax
coating in critical areas.
On vehicles which are washed frequently in
automatic car washes with underbody
washing facility, the protective wax
coating may b e impaired by d irt-dissolv ing
additives, so check the underbody after
washing and have it waxed if necessary.
Before the start of the cold weather season,
check the PVC coating and protective wax
coating and, if necessary, have them
restored to perfect condition.
Caution - commercially available bitum en /
rubber materials can damage the PVC
coating. We recommend that you ha ve
underbody work carried out by a
workshop, who knows the prescribed
materials and has experience in the use
thereof.
The underbody should be washed
following the end of the cold weather
season to remove any dirt adhering to the
underbody since this may also contain salt.
Check protective wax coating and, if
necessary, have it restored to perfect
condition.
206 Technical Data
Technical Data
Vehicle documents,
identification plate
The technical data is determined in
accordance with European Community
standards. We reserve the right to make
modifications. Specifications in the vehicle
docum ents always have priority over those
given in this manual.
Picture no: 14247s.tif
The identification plate is affixed to the
front right door frame.
Vehicle documents, identification
plate....................... .............. .............. 206
Vehicle identification d ata.... .............. 207
Coolant, b rake fluid, oils ........... .......... 207
Engine data................... ....................... 208
Performance........................... ............. . 210
Fuel consumption, CO
2
emissions ......
212
Weights, pay loa d and roof load ........ 214
Tyres ..................... ............. ................... 216
Electrical system ........... ............. .......... 218
Ca pacities ... ............. ............................ 219
Dimensions.. ............................... .......... 221
Mounting dimensions of towing
equipment 3.......... ............................ 222
207Technical Data
Picture no: 13329j.tif
Information on identification plate:
Picture no: 14249s.tif
Veh icle identification data
The Vehicle Identification Number is
stamped on the identification plate (see
previous page) and in the vehicle floor on
the right-hand side under a cover between
the driver’s door and seat.
In other model variants, the identification
plate may also be affix ed to the instrume nt
panel.
Engine identifier and engine number:
marked on left-hand side of engine in
engine b lock .
Coolant, brake fluid, oils
Only use approved fluids.
Use of unsuitable fluids can cause serious
damage to the vehicle.
Engine oils
Information on engine oils is found in the
Service Booklet.
1 Manufacturer
2 Type approval number
3 Vehic le Id entific ation N umber
4 Gross Vehicle Weight rating
5 Permissible Gross Train Weight
6 Maximum permissible front axle load
7 Maximum permissible rear axle load
8 Vehic le-specific or country-specific
data
208 Technical Data
Engine data
Sales designation
Engine identifier code
1.4 TWINPORT
Z 14 XEP
1. 6 TW IN PORT
Z 16 XEP
1. 8
Z 18 XE
VXR
Z 16 LET
Number of cylinders4444
Piston displacement (cm
3
) 1364 1598 1796 1598
Brake horse power (bhp)
at rpm
66
5600
77
6000
92
6000
132
5500
Torque (Nm)
at rpm
125
4000
150
3900
165
4600
230
2200-5400
Type of fuel
1)
1)
Standard quality fuels, e.g. unleaded DIN EN 228.
Petrol Petrol Petrol Petrol
Octane requirement (RON)
2)
unle aded
or unle aded
or unle aded
2)
Bold type: recommended fuel.
95
3)
98
3)
91
3)4)
3)
Knock control system automatically adjusts ignition timing according to type of fuel used (octane number).
4)
Slight reduction in engine ou tput and torque if 91 RON is used.
95
3)
98
3)
91
3)4)
95
3)
98
3)
91
3)4)
95
3)5)
98
3)
6)
5)
Slight reduction in engine ou tput and torque if 95 RON is used.
6)
Do not use fuel of octane num ber 91 RON.
Max . permissible engine spe ed,
continuous operation (rpm ) approx. 6200 6500 6500 6500
Oil consumption (l/1000 km) 0.6 0.6 0.6 0.6
209Technical Data
Engine data
Sales designation
Engine code
1.3 CDTI
Z 13 DTJ
1.7 CDTI
Z 17 DTH
Numb er of cylinders 44
Piston displacement (cm
3
) 1248 1686
Brake horse power (bhp)
at rpm
55
4000
74
4400
Torque (Nm)
at rpm
170
1750 to 2500
240
2300
Type of fuel
1)
1)
Standard quality fuels, e.g. diesel DIN EN 590.
Diesel Diesel
Cetane requirement (CN)
2)
2)
Standard quality fuels: D = diesel, bold type: recommended fuel
49 (D)
3)
3)
A lower value is possible with winter diesel fuels.
49 (D)
3)
Max . permissible engine spe ed,
continuous operation (rp m) approx. 5100 to 5300 4700
Oil consumption (l/1000 km) 0.6 0.6
210 Technical Data
Performance
(approx. mph / km/h
1)
)
1)
The maximum speed is achievable with a maximum of half payload. Optional equipment may reduce the specified maximum speed of the vehicle.
Engine
2)
2)
Sa les desig nat ion see pa ge 20 8.
Z 14 XEP Z 16 XEP Z 18 XE Z 16 LET
Top speed
5-speed manual transmission
5-speed sports transmission
6-speed manual transmission
Easytronic
104 / 168
112 / 181
112 / 181
118 / 190
119 / 192
118 / 190
138 / 222
211Technical Data
Performance
(approx. mph / km/h
1)
)
1)
The maximum speed is achievable with a maximum of half payload. Optional equipment may reduce the specified maximum speed of the vehicle.
Engine
2)
2)
Sa les desig nat ion see pa ge 20 9.
Z 13 DTJ Z 17 DTH
Top speed
5-speed manual transmission
6-speed manual transmission
Easytronic
98 / 157
111 / 178
212 Technical Data
Fuel consumption,
CO
2
emissions
Directive 80/1268/EEC (last changed by
1999/100/EC) has applied for the
measurement of fuel consumption
since 1996.
The directive is oriented to actual driving
practices: Urba n driving is rated at
approx.
1
/
3
and extra-urban driving at
approx.
2
/
3
(urban and extra-urban
consumption). C old sta rts a nd acce leration
phases are also taken into consideration.
The specification of CO
2
emission is also a
constituent of the directive.
The figures given m ust not be taken as a
guarantee for the actual fuel consumption
of a partic ular vehicle.
All values are based on the EU base model
with standard equipment.
The calculation of fuel consumption as
specified by directive 1999/100/EC takes
account of the vehicles kerbweight,
ascertained in accordance with the said
regulation. Optional extras may result in
slightly higher fuel consumption and CO
2
emission levels than those quoted.
To convert l/100 km into mpg, divide 282
by num ber of litres/100 km.
S aving fuel, p rotecting the environm ent
see page 140.
213Technical Data
Fuel consumption, CO
2
emissions
Engine
1)
1)
Sales designation – see page 20 8, 209.
Z 14 XEP Z 16 XEP Z 18 XE Z 16 LET
5-speed /Sports/6-speed /Easytronic transm ission
Fuel consumption (approx. l/100 km)
Urban
Ex tra-urb an
Com bined
CO
2
emission (approx. g/km)
Urban
Ex tra-urb an
Com bined
8.3///–
5.3///–
6.4///–
199///–
127///–
154///–
8.8/–/–/ 8.9
5.5/–/–/ 5.4
6.7/–/–/ 6.7
211/–/–/214
132/–/–/130
161/–/–/161
10.9/10.9/–/10.7
6 .1/ 6.6// 6. 1
7 .9/ 8.2// 7. 8
262/ 262/–/ 257
146/ 158/–/ 146
190/ 196/–/ 187
/–/10.4/
–/–/ 6.3/
–/–/ 7.8/
–/–/ 250/–
–/–/ 151/–
–/–/ 187/–
Engine
1)
Z 13 DTJ Z 17 DTH
5-speed /Sports /6-speed/Easytronic transm ission
Fuel consumption (approx. l/100 km)
Urban
Ex tra-urb an
Com bined
CO
2
emission (approx. g/km)
Urban
Ex tra-urb an
Com bined
6.2/–//
4.3/–//
5.0/–//
167/–/–/
116/–/–/
135/–/–/
6.6///–
4.4///–
5.2///–
178///–
119///–
140///–
214 Technical Data
Weights, payload and roof load
The p ayload is the differe nce betwe en the
permitted Gross Vehicle Weight (see
identification plate, page 206) and the EC
kerbweight.
To ca lc ulate the kerbweight, ente r the data
for your vehicle below:
z Kerb weight from
Ta ble 1 ,
page 215 +.............. kg
z Weight of heavy
accessories from
Ta ble 2 ,
page 215 +.............. kg
The total =.... .......... kg
is the EC kerbweight.
Optional equipment and accessories
increase the kerbweight, w hich means that
the payload will also change slightly.
No te weig ht ra nge s in the ve hicle
documents and on the rating plate.
The combined total of front and rear axle
loa ds must not e xce ed the perm issible
Gross Vehicle Weight. For example, if the
front axle is bearing its maximum
permissible load, the rear axle can only
bear a load that is equa l to the Gross
Ve hicle Weigh t m inu s th e front axle load.
When the tra iler is coupled and the towing
vehicle fully loaded (including all
occupants), the permissible rear axle load
(see identification plate or vehicle
docum ents) may be exceeded by 25 kg
and the permissible Gross Vehicle Weight
by 25 kg.
If the permissible rear axle load is
exceeded, a maximum speed of 60 mph
(100 km/h) applies. If national regulations
specify a lower maximum speed for
vehicles towing a trailer, this must be
ob se rved.
See the identification plate or v ehicle
docum ents for permissible axle loads.
Roof load
The permissible roof load is 75 kg.
The roof load consists of the weight of the
roof rack plus the load carried.
Driving hints – see page 138.
Roof racks 3 see page 163.
215Technical Data
Table 1, Kerbweight in kg
1)
1)
According to EC Directive 70/156/EC, including assumed weights for driver (68 kg), luggage (7 kg) and all fluids (tank 90% full).
Model Engine
2)
2)
Sales designation – see page 20 8, 209.
Manual
transmission
Easytronic
Meriva
Z 14 XEP 1330
Z 16XEP 1375 1375
Z 18 XE 1380 1380
Z 16 LET 1380 1380
Z 13 DTJ 1393
Z 17 DTH 1455
Meriva
with air
conditioning
system
or Electronic
Cl imate Control
(ECC) system
Z 14 XEP 1355
Z 16XEP 1400 1400
Z 18 XE 1405 1405
Z 16 LET 1400 1400
Z 13 DTJ 1418
Z 17 DTH 1480
Table 2, Weight of heavy accessories in kg
Accessories Towing equipment
Weight 25
216 Technical Data
Tyres
Restrictions
Not all tyres available on the market
currently me et the structural requirem ents.
We recommend that you consult a
Vauxhall Authorised Repairer concerning
suitable tyre makes.
These ty res have und ergone spe cial tests
to establish their reliability, safety and
specific suitability for Vauxhall vehicles.
Despite continuous ma rk et monito ring, we
are unable to assess these attributes for
other tyres, ev en if they hav e been g ra nted
approval by the relevant authorities or in
some other form.
Further information – see page 158.
Winter tyres 3
Tyres of size 205/50 R 16 are not suitable
for use as winter tyres except on vehicles
with the Z 16 LET
1)
engine .
Tyres of size 205/45 R 17 are not suitable
for use as winter tyres.
If winter tyres are in use, the spare wheel
may still be fitted w ith a summ er tyre. Use
of the spare wheel may alter vehicle
ha ndling. Obtain a replacement for the
faulty tyre as soon as possible, and have
the wheel balanced and fitted to the
vehicle.
Further information – see page 162.
Tyre chains 3
Tyre c hains may be used on the front
wheels only.
We recommend the use of fine-link chains
which add no more than 10 mm to the
tread and tyre inner wall with (including
cha in lock).
Tyre chains are not permitted on tyre sizes
205/50 R 16 and 205/45 R 17.
Further information – see page 162.
Wheels
Wheel bolt tightening torque: 110 Nm.
Spare wheel 3
Depending on design, the spare wheel is
designed as a temporary spare wheel 3 .
When using the spare whee l, the driv ing
behaviour may be modified. Replace the
faulty tyre as soon a s possible, balance the
wheel and refit to vehicle. Follow the notes
on this page and on pages 162, 178.
On vehicles with alloy wheels 3, the spare
wheel may have a steel rim.
The spare wheel may be fitted with a
smaller tyre
2)
and a smaller wheel than the
wheels fitted to the vehicle.
Tyre pressure in bar / psi
3)
The specified tyre pressures are valid for
cold tyres. The increased tyre pressure
resulting from extensive driving must not
be reduced. The tyre pressures specifie d on
the following pages apply to both summer
and winter tyres.
Th e spar e wh ee l m ust a lways be inflate d to
the tyre pressure for a full load see table
on next page.
Further information
see pages 158 to 162.
1)
Sales designation – see page 20 8, 209.
2)
Country-specific version: In so me countries,
the spare wheel may only be used as a
temporary spare wheel.
3)
1 bar corresponds to 100 kPa / 14.5 psi.
217Technical Data
(ctd.)
Tyre pressure in bar / psi
1)
1)
1 bar corresponds to 100 kPa / 14.5 psi.
Tyre pressure
for load of
up to 3 persons
Tyre pressure
for full load
Engine
1)
Tyres Front Rear Front Rear
Z 14 XEP 175/70 R 14,
185/60 R 15,
205/50 R 16,
205/45 R 17
2.4/35 2.2/32 2.6/38 3.0/44
Z 16 XEP 185/60 R 15,
205/50 R 16,
205/45 R 17
2.4/35 2.2/32 2.6/38 3.0/44
Z 18 XE 185/6 0 R 15,
205/50 R 16,
205/45 R 17
2.4/35 2.2/32 2.6/38 3.0/44
Z 16 LET 185/ 55 R 16
2)
,
195/50 R 16
2)
,
205/50 R 16,
205/45 R 17
2.8/41 2.6/38 3.0/44 3.4/49
Z 13 DTJ 185/60 R 15,
205/50 R 16,
205/45 R 17
2.4/35 2.2/32 2.6/38 3.0/44
Z 17 DTH 185/60 R 15,
205/50 R 16,
205/45 R 17
2.6/38 2.4/35 2.8/41 3.2/46
1)
Sales designation see page 208, 209 .
2)
Only permitted as winter tyres.
218 Technical Data
Electrical system
Battery Voltage 12 Volt
Amp hours 44 Ah / 55 Ah 3 / 60 Ah3 / 66 Ah 3 / 70 Ah 3
Battery for radio frequency remote control CR 20 32
219Technical Data
Capacities
(approx. litres)
Engine
1)
1)
Sales designation – see page 20 8, 209.
Z 14 XEP Z 16 XEP Z 18 XE Z 16 LET
Fuel tank (nominal content) 53 53 53 53
Engine oil with filter change 3.5 4.5 4.25 4.5
Engine oil betw een MIN a nd MAX
on dipstick 1.0 1.0 1.0 1.0
Windscreen wash system reservoir 2.1 2.1 2.1 2.1
He adlight wash sy ste m rese rvoir 3 3.5 3.5 3.5 3.5
220 Technical Data
Capacities
(approx. litres)
Engine
1)
1)
Sales designation – see page 20 8, 209.
Z 13 DTJ Z 17 D TH
Fuel tank (nominal content) 53 53
Engine oil with filter change 3. 2 5. 0
Engine oil betw een MIN a nd MAX
on dipstick 1. 0 1. 0
Windscreen wash system reservoir 2. 1 2. 1
He adlight wash sy ste m rese rvoir 3 3.2 3. 5
221Technical Data
Dimensions
(mm)
Meriva Meriva VXR
Overall length 4052 4068
Overall width 1694 1694
Width including two exterior mirrors 1948 1948
Overall height 1624 1624
Length of luggage compartment floor 861 861
Luggage compartment width 1034 1034
Height of luggage compartment opening 832 832
Wheelbase 2630 2630
Turning circle diameter
1)
1)
In me t re s.
10.42 10.42
222 Technical Data
Mounting dimensions of
towing equipment 3
All measurements refer to Vauxhall-
approved towing equipment.
9 Wa rning
Only use towing equipm ent approved for
your vehicle. We recommend entrusting
retro-fitting of towing equipment to a
workshop.
Di me nsi o n m m
A
468
B
727
C
508.1
D
471.5
E
441.4
F
497.6
G
496.6
H
35.1
I
50.1
J
36.4
K
90
L
142.6
M
585
N
568
Dimension mm
O
425
P
378
Q
14
R
16
S
69
T
76
U
430
223Technical Data
224 Service, Maintenance
Service, Maintenance
In our ex perience, the most com mon cause
of all complaints is the result of
misunderstanding or lack of
communication between the customer a nd
the Vauxhall Authorised Repairer.
We sincerely hope you will never have
cause to complain about your vehicle.
However, if things do go wrong, the best
cours e of action for y ou to ta ke is to
contact your Vauxhall Authorised
Repairers Service Reception Staff and
explain the difficulty you are having. We
are confident they will do their utmost to
resolve the problem to your complete
satisfaction.
Sometimes, however, despite the best of
intentions of all concerned,
misunderstandings can occur. If your
problem has not been resolved to your
satisfaction, please make an appointment
to discuss the matter with the Manager of
the department concerned.
The majority of areas of concern can be
quic kly resolved in this way.
Should you wish to pursue the matter
further, the Principal of the Vauxhall
Authorised Repairer should be made
aware of your concern. It is advisable in
cases such as this to write to him to confirm
your problem and the solutions that have
been offered.
You can be assured the Authorised
Repairers Principal w ill only be too anxious
to fully investigate your prob lems and
correct any errors made. After all, he has a
large investment in his business and is
proud of his reputation and
professionalism and fully realises that
satisfied customers are his key to success.
In the unlikely event that you are still not
happy with the answer your Vauxhall
Authorised Repairer has given, or the
action he proposes to correct the problem,
you may contact the Customer Care
Department
1)
where a team of Customer
Care Consultants will spare no effort to
ensure your complete satisfaction.
Vauxhall Motors Ltd.
Customer Care,
Griffin House ,
Osborne Road,
LUTON,
Be ds. , LU1 3YT
Telephone: 0845 090 2044
They w ill review all the facts involve d. Then
if it is felt some further action can be taken,
the Vauxhall Authorised Repairer will be
advised accordingly. In any case, your
contact will b e acknowledged confirm ing
Vauxhall Motors position in the matter.
If you are not satisfied with the outcome,
you can if you wish, seek advice from an
independent third p arty suc h as:
Autom obile Association (A.A.)
Fanum House,
BASINGSTOKE,
Hants., R G21 2EA
Inspection system ............................... . 226
Genuine Vauxhall Parts and
Accessories ............ ............................ 227
A note on safety .................... .............. 227
Checking and topping up fluids ........ . 228
Engine oil . ............................... .............. 228
Diesel fuel filter ............. ....................... 230
Coolant .... ............. ............................... . 230
Brake fluid ..................... ....................... 232
Windscreen wiper ...................... .......... 233
W ind scre en and headlight wash
sy ste ms 3........... ............................... . 234
Battery .................. ............................... . 235
Protecting electronic components .... . 236
Vehicle decomm issioning................... . 237
Vehicle recommissioning........... ......... . 237
1)
Calls may be monitored and recorded for
training purposes.
225Service, Maintenance
Royal Autom obile Club (R.A.C. ),
R.A.C. Motoring Services Ltd.,
89-91 Pall Mall,
LONDON, SW1Y S45
The Customer Relations Department,
Soci ety of Motor Manufacturers and
Traders Ltd. (S.M.M.T.),
Forbes House, Halkin Street,
LONDON, SW1X 7DS
Customer Complaints Service,
Scot tish Motor Trad e A ssocia tion,
(S.M .T.A.),
3 Palmerston Place,
EDINBURGH, EH12 5AQ
The Nationa l Conciliation Service,
Retail Motor Ind ustry Fed era tion,
9 North Street,
RUGBY, CV21 2AB
If you have a p roblem w hilst abroa d:
The S ervice Departments of ADAM OPEL
GmbH and General Motors branches
everyw here will provide information and
assistance:
In Luxembourg please contact
the General Motors Service Department in
Antwerp – Belg ium
Tele phone 00 32-34 50 63 29
General Motors Austria GmbH
Groß-Enzersdorfer Str. 59
1220 Vienna Austria
Tel. 00 43 1-2 88 77 444 or
00 43-1-2 88 770
General Motors Belgium N.V.
Noorderlaan 401 Haven 500
2030 Antw erp – Belgium
Telephone 00 32-34 50 63 29
General Motors Southeast Europe,
org. s lož ka
Olbrachtova 9
140 00 Prague – Czech Republic
Tel. 00 420-2 39 004 321
General Motors Denmark
Jaegersborg Alle 4
2920 Charlottenlund – Denmark
Telephone 00 45-39 97 85 00
Vauxhall Motors Ltd.
Customer Ca re
Griffin House, Osborne Road
Luton, Bedfor dshire, LU1 3YT Engla nd
Tel. 00 44-845 090 2044
General Motors Finland Oy
Pa juniityntie 5
00320 Helsinki – Finland
Tel. 00 358-9 817 101 47
General Motors France
1 9, avenue du Marais
Angle Q ua i de Bezo ns
95101 Argenteuil Cedex – France
Tel. 00 33-1-34 26 3051
ADAM OPEL Gm bH
Bahnhofsplatz 1
65423 Rüsselsheim – Germany
Tel. 00 49-61 42-77 50 00 or
00 49-61 42-7 70
General Motors Hellas S.A.
56 Kifisia s Avenue & Delfon str.
Amarousion
151 25 Athens – Greece
Tel 00 30-1-6 80 65 01
General Motors Southeast Europe Ltd.
Szabadsag utca 117
2040 Budaörs Hungary
Tel. 00 36-23 446 100
General Motors India
Sixth Floor, Tower A, Global Business Park
Mehra uli – Gurgaon Road
Gurgaon – 122 022, Haryana India
Tel. 00 91-124 280 3333
General Motors Ireland Ltd.
Opel House, Unit 60, Heather Road
Sandyford, Dublin 18 Ireland
Tel. 00 353-1-216 10 00
General Motors Italia Srl
Piazzale dell’Industria 40
00144 Rome Italy
Tel. 00 39-06-5 46 51
General Motors Nederland B.V.
Lage Mosten 49 63
4822 NK Breda Netherlands
Tel. 00 31-76-5 44 83 00
General Motors Norge AS
Kjeller-Vest 6
2027 Kjeller Norway
Tel. 00 47-23 50 0104
General Motors Poland Sp. z o. o.
Domaniewska 41
06-672 Warsaw Poland
Tel. 00 48- 22-606 17 00
226 Service, Maintenance
General Motors Portugal
Quinta da Fonte
Edificío Fernão M agalhães, Piso 2
2780-190 Paço dArcos – Portugal
Tel. 00 351- 21 440 75 00
General Motors Southeast Europe,
org. zložka
Apollo Business Centre
Mlyns Nivy 45
821 09 Bratislava Slovakia
Tel. 00 421-2 58 275 543
General Motors España S.L.
Paseo de la Castellana, 91
28046 Madrid Spain
Tel. 00 34-902 25 00 25
General Motors Norden AB
Årstaängvägen 17
100 73 Stockholm Sweden
Tel. 00 46-20 333 000
General Motors Suisse S.A.
Stelzenstraße 4
8152 Glattbrugg – Switzerland
Tel. 00 41-44 828 28 80
General Motors Türkiye Ltd. Sti.
Kemalpasa yolu üzeri
35861 Torbali/Izmir Turkey
Tel. 00 90-2 32-8 53-1 4 53
In Albania, Bosnia-H erzegovina ,
Bulga ria, C roatia, Estonia, La tvia ,
Lithuania, Macedonia, Romania,
Serbia-Montenegro and Slovenia
please contact the
General Motors Service Department in
BudaörsHungary
Tel. 00 36-23 446 100
Picture no: 17901s.tif
Inspection system
In orde r to guarantee econom ical and safe
vehicle operation and to mainta in the
value of your vehicle, it is of vital
importance that all maintenance work is
carried out at the proper intervals as
specified.
For vehicles with fixed oil change and
service intervals, InSP appears in the
odometer display when the ignition is
turned on before the service work becomes
due: arra nge for the next S ervice to be
performed by a workshop within one week
or 300 miles (500 km).
The service interval display takes acc ount
of off-the-road periods during which the
battery is disconnected.
For vehicles with flexible engine oil change
and service intervals, the length of these
intervals is based on several parameters
stemming from usage. For this reason,
various engine-specific data is continually
gathered and is used to calculate the
remaining distance until the next Service.
The distance remaining c an be displayed
with the ignition turned off: press the reset
button for the trip odometer for approx.
2seconds, InS P and the remaining
distance appea r (see Fig. 17901 S).
If the remaining d istance is less than
1000 miles (1500 km), InSP is displayed
with a remaining distance of 600 miles
(1000 km) when the ignition is switched on
and off. InSP is disp layed for se ve ra l
seconds if the remaining distance is less
than 600 miles (1000 km). Have the service
work that is due carried out within one
week or 300 miles (500 km). Have this work
carried out by a Vauxhall Authorised
Repairer in order to avoid invalidation of
warranty claims.
227Service, Maintenance
Further information on maintenance and
the Service Plan can be found in the Service
Booklet, which is in the glove comp artm ent.
Have service work and repairs to the
bodyw ork and components performed
properly b y a workshop and in accordance
with Vauxhall Motors recommendations,
using Genuine Vauxhall Parts and
Accessories. We recommend your Vauxhall
Authorised Repairer, who has excellent
knowledge of Vauxhall vehicles and is in
possession of the necessary tools and
current Service Instructions from Vauxhall.
To exclude the possibility of loss of
warranty, use of a Vauxhall Authorised
Repairer is recommended in particular
during the warranty period. For further
information, see the Service Booklet.
Separ ate anti-cor rosion service
Hav e the work performed b y a workshop at
the intervals specified in the Service
Booklet.
Genuine Vauxhall Parts and
Accessories
We recommend that you use "Genuine
Vauxhall Parts and Accessories" and
conversion p arts released expressly for
your vehicle type. These parts have
undergone special tests to establish their
reliability, safety a nd specific suitability for
Vauxhall vehicles. Despite continuous
market monitoring, we cannot assess or
guarantee these attributes for other
products, even if they have been granted
approval by the relevant authorities or in
some other form.
"Genuine Vauxhall Parts and Accessories"
and conversion parts approved by
Vauxhall can be obtained from your
Vauxhall Authorised Repairer, who can
provide expert advice on permitted
technical changes and ensure correct
installation.
Picture no: 17922S.tif
A note on safety
To avoid injury from moving parts and
cables conduc ting ignition voltage, only
carry out engine compartment checks
(e.g. checking brake fluid or engine oil
level) when the ignition is switched off.
9 Warning
The cooling fan is controlled by a
thermoswitch and can therefore start
unexpe ctedly ev en if the ig nition is
switched off. Risk of injury.
Electronic ignition systems generate very
high voltages. Do not touch the ignition
system; high voltage can b e fatal.
228 Service, Maintenance
Picture no: 14234s.tif
Never carry out any repairs or adjustment
and maintenance work on the vehicle
yourself. This especially applies to the
engine, chassis and safety parts. You may
unwittingly infringe the provisions of the
law and, by not performing the work
properly, endanger yourself and other
road users.
Checking and topping up fluids
To aid identification, the caps used when
topping up engine oil, coolant and w ash
fluid as well as the oil dipstick are coloured
yellow.
Picture no: 16486s.tif
Eng ine oil
Information on engine oils is found in the
Service Booklet.
Engine oil level and consumption
Every engine consumes engine oil for
technical reasons. The oil consumption
cannot be assessed until a fairly long
distance has been driven, and may be
above the specified value when the vehicle
is first being driven (run-in period).
Frequent driving at high revs increases
engine oil consumption.
In vehicles w ith engine oil level check 3, the
engine oil level is checked automatically -
see page 88. It is particularly advisable to
check the engine oil lev el b efore emb arking
on a long jo urney.
Picture no: 16487s.tif
Engine oil level check , topp ing up
engine oil
The oil level must be checked with the
vehicle on a level surface and with the
eng ine (which must be at operating
temperature) switched off. Wait at least
5 minutes be fore chec king the level, to
allow the normal oil accumulation in the
engine to drain into the oil pan.
9 Warning
Important: It is the owners responsibility
to maintain the correct level of an
appropriate quality oil in the engine.
229Service, Maintenance
Picture no: 17903s.tif
To check the engine oil level, insert wiped
oil dipstick into dipstick tube as far as it will
go. Top engine oil up if the level has
dropped into the range of the top-up mark
MIN.
The engine oil level must not exceed the
upper mark MAX on the dipstick. Excess
engine oil must be drained off or extracted.
If the engine oil level is above the MAX
mark, there is a risk of damage to the
engine or the catalytic converter.
The amount filled must be between the
MIN and MA X marks – see page 219.
Picture no: 15972s.tif
Top up with the same brand of engine oil
that was used during the previous oil
cha ng e, following the instructions in the
Service Booklet.
To close, position the cap and screw it into
place.
Capacities see page 219.
Picture no: 14238s.tif
Engine oil change, oi l filter chang e
Have oil changed by a workshop as a
function of the service interval display.
We recommend that you use genuine
eng ine oil filters.
9 Wa rning
Do not allow the engine oil to drop below
the minimum level!
230 Service, Maintenance
Picture no: 17902s.tif
Diesel fuel filter
At each eng ine oil chang e, hav e the d iesel
fuel filter 3 checked for any water residue
by a workshop.
Illumination of control ind icator A
indica tes water in the diesel fuel filter.
Have diesel fuel filter checked at shorter
intervals if the vehicle is subjected to
extreme opera ting conditions, such as high
humidity (primarily in coastal areas),
extremely high or low outside
temperatures, and substantially varying
daytime and night-time temperatures.
Coolant
The glycol-based coolant p rovides
excellent corrosion protection for the
heating and cooling systems as well as
anti-freeze protection down to 28 °C.
It remains in the cooling system throughout
the year and need not be changed.
Use of certain anti-freezes can lead to
engine damage. We therefore recommend
that you use only approved anti-freezes.
9 Wa rning
Used engine oil cannot be disposed of
with domestic refuse. Observe the legal
requirements for disposal of old oil and
filters, to protect the environment and
your he alth .
9 Warning
Anti-freeze is a danger to health; it must
therefore be kept in the original container
and out of the reach of children.
231Service, Maintenance
Picture no: 17905s.tif
Anti-freeze and corrosion protection
Before the start of winter, have a w orkshop
check the anti-free ze protection. The anti-
freeze level must guarantee protection
down to approx. -28 °C. Insufficient anti-
freeze will reduce the frost protection level
and the corrosion protection. If necessary,
add anti-freeze.
If coolant loss is topped up with water,
have concentration checked and ad d anti-
freeze if necessary.
Picture no: 17904s.tif
Coolant level
Hardly any losses occur since the cooling
system is sealed, and it is thus ra rely
necessary to top up the coolant.
The coolant should be a little above the
KAL T/COL D mark in the expansion tank
with a cold cooling system. The coolant
level can also be read off from the outside
of the expansion tank.
When the engine is at op erating
temperature, coolant level rises. It falls
again when the system cools. If it falls
below the KALT/COLD mark when the
system is cold, top up to the mark.
Top up anti-freeze. If no anti-freeze is
available, top up with clean tap water. If
tap water is unavailable, distilled water
can be used.
After filling with tap water or distilled
water, measure the anti-freeze
concentration and ad d anti-freeze if
required. Have a workshop establish the
cause of the coolant loss.
Too low a coolant level can cause engine
damage.
To close, position the cap and screw it into
place.
9 Warning
Allow engine to cool down before
removing coolant filler cap. Remove
coolant filler cap carefully so that
pressure can escape slowly, otherwise
there is a risk of scalding.
232 Service, Maintenance
Coola nt temperat ure
If the temperature gauge enters the red
zone, check the coolant level immediately.
z Coolant level too low:
Add coolant. See notes under "Anti-
freeze and corrosion protection" and
"Coolant level". Have a workshop
eliminate the cause of the coolant loss.
z Coolant OK:
Have the cause of the raised coolant
temperature eliminated. Contact a
workshop.
Picture no: 14765s.tif
Brake fluid
Brake fluid level
The brake fluid level in the reservoir must
be neither higher than the MAX mark nor
low er than the MIN mark.
Use of certain brake fluids can lead to
damage or reduced braking effect. We
therefore recommend that you use only
approved high-performance brake fluid.
Absolute cleanliness is important when
topping up, since contamination in the
brake fluid can c ause brake system
malfunctions.
After correcting the brake fluid level, have
a workshop eliminate the cause of the
brake fluid loss.
9 Warning
Brake fluid is poisonous and corrosive.
Do not allow it to come into contact with
eyes, skin, fab ric or painted surfaces.
Direct contact could cause injury and
damage.
233Service, Maintenance
Brake fluid chang e
Brake fluid is hygroscopic, i.e. it absorbs
water. If the brakes become hot, such as
when driving on long downhill stretches,
vapour bubb les can occur in the water
which can have an extremely adverse
effect on braking power (depending on the
proportion of water).
The brake fluid change intervals specified
in the S ervice Booklet must therefore b e
observed.
Windscreen wiper
Clear vision is essential for safe driving.
The refore, check wind screen wipe r and
headlight wash/wipe system 3 regularly for
cleaning effect. We recommend replacing
the wiper blades after a year at most.
If the windows are dirty, op erate the
windscreen wash before switching the
wiper on, in order to prevent wiper blade
wear.
Do not switch windscreen wiper on if
wind ow s a re icy , s ince this may damage
the wiper edges or the wiper system.
If the wiper becomes frozen on to the glass,
we recom mend that it be released w ith the
aid of Vauxhall De-icer Spray before
starting the v ehicle, to prevent w iper motor
damage.
Smearing wiper blades can be cleaned with
a soft cloth and Vauxhall Windscreen
Wash Solvent.
Wiper blades whose lips have become
hardened, cracked or covered with silicone
must be replaced. This may be necessary
as a result of the effects of ice, thawing salt
or heat, or the incorrect use of cleaning
agents.
Switc h off w indscreen wiper if using a car
wash – see pages 11, 204.
Wiper care see page 204.
9 Wa rning
Have the brake fluid changed by a
workshop. Observe the legal
requirements for disposal of brake fluid,
to protect of the environment and your
he alth.
234 Service, Maintenance
Picture no: 13328j.tif
Wiper bla des on t he windscreen
Lift wiper arm . Move release lever and
detach wiper blade.
Picture no: 9392t.tif
Wiper blade on the rear w indow 3
Lift wiper arm. Diseng age wiper blade as
shown in illustration and remove.
Picture no: 14245s.tif
Windscreen and headlight
wash systems 3
Reservoir for windscreen wash system and
rear window wash system in engine
compa rtm ent be neath the wind scre en
wiper on the driv ers side of the vehicle .
235Service, Maintenance
Picture no: 14246s.tif
In vehicles with headlight wash system 3,
the opening for refilling is in the engine
compartment behind the headlights on the
driver’s side of the vehicle.
Capacitiessee p ages 219, 220.
Fill only with clean water to prevent the
nozzles from clogging. To improve
cleaning efficiency, we recommend that
you add a little Vauxhall Windscreen Wash
Solvent.
The windscreen wash system and
headlight wash system will not freeze in
winter:
When closing the reservoir, press the lid
firmly over the beaded edge all the way
round.
Picture no: 13488a.tif
Battery
The battery is m ainte nance-free.
Frost protection
down to
Mixture of
Vauxhall
Windscreen Wash
Solvent: Water
– 5 °C 1 : 3
– 10 °C 1 : 2
– 20 °C 1 : 1
– 30 °C 2 : 1
9 Warning
Have the battery changed by a
workshop. Observe the legal
requirements for disposal of old batteries
to protect the environment a nd your
he alth.
236 Service, Maintenance
Retro-fitting of electrical or electronic
accessories can discharge or add extra
load to the battery. Obtain advice on the
technical p ossibilities, e.g. use of a more
powerful ba ttery, from a workshop.
Parking the vehicle for more than 4 weeks
can lead to battery discharging. This may
reduce the service life of the battery.
Disconnect battery from on-board power
supply by disconnecting the negative
terminal.
The Vauxhall alarm system 3 siren must be
deactivated as follows: switch the ignition
on then off, disconnect the vehicle’s
battery within 15 seconds.
Ensure ignition is switched off before
connecting battery. Then perform the
following actions:
z Set date and time in information
display – see page 94,
z If necessary, activate the window
elec tronics 3 see page 40,
z Calibrate steering angle
se nsor (ES P®
Plus
) 3, see page 150.
In order to prevent the battery from
discharging, some consumers such as the
courtesy light automatically switch off
after approx. 30 minutes.
Protecting electronic components
In order to prevent faults in electronic
components in the electrical system, never
connect or disconnect battery with engine
running or ignition switched on. Never start
engine with battery disconnected, e.g.
when starting using jump leads.
To avoid damaging the vehicle, do not
make any modifications to the electrical
sy ste m, e.g. connecting additional
consumers or tamp ering with e lectronic
control units (chip tuning).
Disconnecting/connecting the battery
fro m /t o the ele ctr ical syst em
Disconnect the battery from the vehicle
electrical system before charging:
First detach the negative and then the
positive lead. Do not reverse the polarity of
the battery, i.e. do not confuse the
terminals for the positive and negative
leads. When connecting, start with the
positive lead and then connect the
negative lead.
9 Warning
Electronic ignition systems generate very
high voltages. Do not touch the ignition
system; high voltage can be fatal.
237Service, Maintenance
Vehicle decomm issioning
Observe national regulations.
If the vehicle is to be parked for several
months, to avoid damage have the
following work performed by a workshop:
z Wash and preserve the vehicle – see
page 202,
z Check corrosion protection in engine
compartment and on underbody and
make good if necessary,
z Clean and preserv e rubber seals on
bonnet and doors,
z Change engine oil – see page 229,
z Check anti-freeze and corrosion
protection see page 231,
z Check the coolant level, top up with anti-
freeze if necessary – see page 231,
z Empty windsc reen w ash system and
headlight wash system 3 reservoirs,
z Increase tyre pressure to value specified
for full load – see page 216.
Vehicle storag e
z Park vehicle in a dry and well ventilated
place. With manual transmission, select
first gear or reverse gear, and with
Easytronic3, move selector lever to
middle position before switching ignition
off. Use wedges or the like to prevent
vehicle from rolling.
z Do not apply handbrake,
z Disconnect battery by disengaging
negative terminal from vehicle electrical
system see page 236.
Vehicle recommissioning
Observe national regulations.
Perform the following work before
recommissioning the vehicle:
z Connect ba ttery – see page 236,
z Check tyre pressure, correct if
necessary – see page 216,
z Fill up windscreen wash system and
headlight wash system 3 reservoirs – see
page 234,
z Check engine oil level – see page 228,
z Check the coolant level, top up with anti-
freeze if necessary see page231,
z Fit the number plate, if necessary.
238 Index
Index
A
AB S (Anti-lock Braking System) ........... 156
Ac cessories ......... ............................... ..... 176
Ac cessory socket ........ ......... .................... 79
Ad aptive brake lights ............................ 154
Ad aptive Forward Lighting (AFL) .... ..... 109
Bulb replacem ent ... ........................... 193
Driving abroad .............................. ..... 113
Air conditioning system .......... ......117, 123
Air intake ............ .............. ...................... 131
Air recirculation system ................. 123, 130
Air vents ............................... ............. ..... 118
Airba gs ............................. ........................ 67
Ala rm siren .................. ............................. 36
Alterna tor .................... ............. ................ 87
Antenna ............. .............. ..............114, 202
Anti-corrosion service .............. .............. 226
Anti-freeze .............. ............................... 230
Anti-freeze protection ............. ......230, 234
Anti-knock q ua lity of fuel ..................... 142
Octane number .................... .............. 208
Anti-theft alarm system .......................... 34
Anti-theft lo ck
Alloy wheels ............ ........................... 180
Anti-theft protection .................... ........... 15
Aq ua planing ........... ............. .................. 161
Arm rest .................... ............. .................... 47
Ashtray .. ............................... ............ 80, 112
Automatic anti-dazzle interior mirror .... 38
AU X input .......... ............................... ..... 115
B
Battery .......... .........................139, 218, 235
Interruption of p ow er supply ...... 40, 137
Battery discharge protection . ..............113
Before starting-off .......... ......................... 14
Belt tensioners ........... .............................. 59
Bleeding, diesel fuel system ....... .......... 170
Bonnet .. ............................... ................... 170
Boot, see Luggage compartment .... 32, 52
Brake assist ................ .............. .............. 154
Brake lights ..................... ......... ......154, 197
Brake system ............................... .......... 154
Brakes
ABS ..................... ............................... . 156
Adaptive brake lights .............. ..........154
Brake assist ........ ............................... . 154
Brake fluid .......... ........................207, 232
Brake lights .............................. .......... 197
Brake servo unit ................... ............. . 138
Handbrake .................. ............. .... 15, 155
Bulb replacem ent ............................. ..... 190
239Ind ex
C
Ca pacities .. ............. .......................219, 220
Ca r Pass .. ............................... ............. ......26
Ca ra van / trailer towing ....... ................. 138
Ca re ........ ............................... ................. 202
Ca ta lytic converter ................... .....149, 171
Central locking system .... .................. 28, 30
Centre console lighting ... ..............111, 112
Changing the radio frequency
remote c ontrol battery ..................29, 218
Changing tyre / wheel type ................... 158
Changing wheels ............. ......... ............. 178
Chassis number, see
Vehicle Identification Number ............ 207
Child restraint systems .... ........................65
Child safety locks .... ........................... 36, 40
Ciga rette lighter .. ............................. 79, 112
Clutch operation .......... ..........................139
CO
2
emissions ........................... ............. 212
Coin holder ..... .............. ............................ 83
Cold start ............. ............. ...................... 139
Colour Information Display ...... ...............95
Contrast .. ............................... ...................98
Control indica tors .... ............................. 8, 84
ABS (Anti-lock Brak ing System ) ........ 157
Adaptive Forward Lighting
(AFL) .. ............................... ............ 84, 109
Airbags ........... .............. ........................ 72
Belt tensioners ........................... ........... 60
Cruise control ............................ ......... 151
Engine electronics ........ ...................... 147
EPS (Electric Power S teering) ... ........... 88
ESP (Electronic Stability Program) .... 149
Exhaust .. .............. ............................... 147
Immobiliser .......... ............................... ..27
Coolant ............................. ...................... 230
Coolant level .................... ............. ......... 231
Coolant temp erature d isplay .......... ....... 90
Correcting time .. ............................... ....... 97
Coupling sock et load ................... ......... 167
Courtesy lights ..................... ......... ......... 111
Bulb replacem ent ... ........................... 200
Cruise control ................... ......................151
Curtain airbags ........... ............................. 71
Curve lighting (AFL) ......... ................ 25, 109
D
Dashboard, see Instrum ent panel .. ..........6
Data . ............................... ................. 26, 206
Date ...... ............................... .............. ....... 94
Daytime running lights ...... ................... 105
Decommissioning ........... ............. .......... 237
Demisting a nd defrosting
Windows .... ............. ............................ 122
With Electronic Clim ate Control ....... 128
With the air conditioning system ..... 125
Diesel fuel filter ...... ............. ................... 230
Diesel fuel system ...... ....................170, 230
Die sel particle filte r 88, 119, 130, 1 39, 148
Dimensions ......... ............. ....................... 221
Dipped beam .................. ......................... 10
Bulb replacement ........... ......... ..191, 193
Display .......... ............................... ......... ... 92
Display m ode ..... ............................... ....... 99
Door locks . ............................... ........26, 204
Driving ab road ...... ........................224, 225
Head lights .......... ............................... . 113
Toll system s ..................... .............. ..... 115
Driving hints .. ............................... .......... 138
240 Index
E
Ea sytronic ... ............. .........................13, 132
Driving programmes ............. ............. 134
Fault ............ ............................... ......... 137
Interrup tion of power supply ............ 137
Kickdown ...................... ...................... 135
Selector lever ............ ............. .......13, 133
Winter prog ramme ............... ............. 135
Economical driving ................... ............. 140
Electric Power Steering (EPS) ...................88
Towing ............. ............................... .... 173
Electric windows ........... ............................ 39
Fault ............ ............................... ...........40
Electrical system ................... 186, 218, 236
Electronic Climate Control (ECC) ........... 126
Electronic components ............. ............. 236
Electronic immobiliser ...... ........................27
Electronic Stability Program (ESP) ......... 149
Engine code ........ ...........................208, 209
Engine control indicator ........................ 147
Engine oil ............................... ................. 228
Engine oil filter .... ............. ...................... 229
Engine oil level and
consum ption ................... ..... 208, 209, 228
Engine oil pressure ....... ......... ................... 86
Engine speed ............................. ............. 139
Engine wash ........ ............................... .... 205
Env ironmenta l protection .............202, 229
Exhaust control indicator ......... ............. 147
Exhaust ga ses ............................... ......... 148
Exhaust system ... ............. ...................... 148
Exterior mirrors .... .........................4, 36, 119
F
Fan ......... ............. ....................117, 120, 227
Filling station
Capacities ............... ...................219, 220
Engine oil level ..................... .............. 228
Fuel ............. ............. ...................208, 209
Opening the bonnet .......................... 170
Tyre pressure ....... .......................141, 216
Vehicle data ... .............. ..............206, 207
Windscreen wa sh system .... .............. 234
First-a id kit ..... ............................... ......... 176
Flat ty re . ...................... ......... .................. 182
FlexSpa ce ........... ............................... ....... 51
Fog tail light ............ ............................... 107
Bulb replacem ent ... ........................... 197
Footbrake ....... ......... .......................154, 155
Front fog lights ............................. ......... 106
Bulb replacem ent ... ........................... 196
Front passenger’s airbag ............ ........... 67
Fuel .... ............................... ......142, 208, 209
Fuel consumption ... .......................140, 212
Fuel filter ................. ............................... 230
Fuel level ................. ............................... .. 90
Fuel system, diesel ................... .............. 170
Fuel tank
Fuel gauge . ............................... ...........90
Fuses .. ............................... ............. ......... 186
G
Gears ......... ............................... ............. ... 13
Generator, see Alternator .. ..................... 87
Genuine Vauxhall Parts
a nd Accessories ..................... .............. 224
Glasses compartment ........ ..................... 82
Glove compartment ............................. ... 81
Glove compartment lighting .. ............. . 112
Bulb replacement ........... ......... .......... 201
Cooling ........... ............................... ..... 119
Graphical I nformation Display ........ ....... 92
Gross Vehicle Weight ..... ....................... 214
H
Halogen headlight system ................... 191
Bulb replacement ........... ......... .......... 191
Driv ing abroad .................... .............. 113
Handb ra ke ............................... ........ 15, 155
Haz ard warning lights .................... 10, 107
Head restraints .. ........ .................. 21, 45, 46
Headlight flash ...... ............................... ... 10
Headlight range adjustment ........ 107, 190
Headlight switch ..................... .......... 9, 105
Headlight wash system ..... .....11, 104, 234
Headlights ......... ............................... ..........9
Changing bulbs ..... ............................ 191
Daytime running lights ... .............. ..... 105
Driv ing abroad .................... .............. 113
Front fog lights .................... ......... ..... 106
Reversing lig hts ...... ............................ 107
Warning device ........................ .......... 103
241Ind ex
Heated exterior mirrors ... ........12, 119, 130
Heated rear window ................12, 119, 130
Heated seats ........... ............................... 119
Heating ................ ...........................117, 121
Seats ......................... .......................... 119
With Electronic Climate Control ........ 127
With the air conditioning system ...... 117
Height adjustment
Seat belts .... ............................... ........... 62
Steering wheel .......... .............................. 9
High-pressure cleaners ... ..... 166, 203, 205
Horn ..................... ............................... ......11
I
Identification plate ............... .........206, 207
Ignition sy stem ...................... 227, 235, 236
Imm ob iliser ............................ ...................27
Information display ..... ............................ 92
Infotainment system ............. ................. 114
Instrument display ....... ............................ 89
Instrument illumination ..................... .... 111
Bulb replacement ..... .......................... 201
Instrument pa nel .......... ............. ............. 6
Instruments ......... ............. ..............6, 84, 89
Interior mirror ............... ............. ...........5, 38
Interruption of power supply ............ .... 101
Easytronic ..................... ............. ......... 137
Elec tric sunroof .... .............. ...................42
Elec tric wind ow s .................... ......... ......40
Elec tronic S ta bility Program ......150, 235
ISO-FIX ............ ............................... ...........64
J
Jack ..................... ............................ 176, 180
Jump leads ......... ............................... ..... 172
K
Keys ... ............. ............................... ........... 26
Extending ... ............. ............................. 26
Ignition lock ......... ......... .................. 14, 27
Locking doors ..... .....................28, 30, 36
Remove ........... .............. ........................ 15
Starting .. ......... ............................... ....... 27
Starting the engine ...... ........................ 14
L
Language selection ............. .................... 97
Lashing eyes ...... .............. ........................ 56
Leather trim ... ......... ............................... 204
Light switch .............................. .................. 9
Lighting .......... ......... ........................... 9, 105
Driving abroad .............................. ..... 113
Loading the vehicle .................56, 166, 214
Locking d oors ...................... ....2, 28, 30, 36
Locks .. ............................... ............. ......... 204
Lubricants ...... ............................... .207, 228
Luggag e comp artm ent ................ .....32, 52
Bulb replacem ent ... ........................... 201
Cov er . ............. ............................... ....... 54
Extension .... ......... ........................... 32, 52
Lighting . ......... ............................... ..... 112
Loading ............... .................56, 166, 214
Lumba r support .......... ............................. 44
M
Main b eam ......... ............................... ....... 10
Bulb replacement ........... ......... ..192, 194
Control indica tor .... .............................. 86
Maintenance
Air cond itioning system .................... 131
Anti-freeze protection .... ................... 230
Brake fluid .......... ............................... . 232
Brakes .... ............................... .............. 154
Catalytic conv erter ............................ 149
Engine oil ... ............................... ..228, 229
Fuel consumption .................... .......... 141
Tyre pressure .................. ......... ..159, 216
Tyres ................... ............................... . 160
Windscreen wiper ........... ................... 233
Manual transmission . .............................. 13
Mechanical anti-theft locking system ... 30
Tow ing equipment ......... ................... 165
Mirrors ........... ............................... ........ 5, 38
Misted wind ow s ......... ............122, 125, 128
Mobile telephone ........... ....................... 116
Muffler, see Exhaust system ............ ..... 148
N
N umber plate lighting ... ......... .............. 198
Bulb replacement ........... ......... .......... 198
N umber plates .................... ................... 237
242 Index
O
Octane numbers .......... ......... 142, 208, 209
Odometer ..................... ......... ...................89
Oil chang e ...... ............................... ......... 229
Oil filter change ...... ............................... 229
Oil level and consum ption .... 208, 209, 228
Oil pressure .... ......... ............................... ..86
Operating temperature ................ ......... 139
Outside temperature ga uge ........ ........... 93
Overrun ... ............. ...........................139, 141
P
Paintwork dama ge ....................... ......... 203
Parking ... ........ ............................... ...........15
Parking distance sensors .......... ............. 153
Parking lights .......... ............................... .... 9
Bulb replacement ..... .......................... 195
Parts ........ ............................... ................. 224
Peda ls ..... ........ ............................... ......... 139
Performance .......................... ............. .... 210
Petrol . ............................... ............. ......... 142
Pinking ..................... ............................... 142
Pollen filter . ............. ............................... 131
Power steering,
see Electric Power Steering (EPS) ........ ..88
Preheating ........... ............. ........................88
Pushing, towing ........... ............. ............. 171
Q
Quickhea t ........... ............................ 121, 127
R
Radio . ............................... ............. ...24, 114
Radio eq uipm ent (CB) ........................... 116
Radio frequency rem ote control ........... .. 28
Central locking system ............. ........... 28
Steering wheel ......... ..................... 24, 114
Radio reception ............................ ......... 114
Reading lig hts .... ............................... ..... 112
Rear light cluster ............................... ..... 105
Bulb replacem ent ... ........................... 197
Rear seats .......... ............................... ....... 50
Rear w indow wash system ......12, 104, 234
Refuelling ......................... ...................... 143
Fuel filler ca p .................... .................. 144
Replacement keys ............................ ....... 26
Reversing lights .. ......... ........................... 107
Bulb replacem ent ... ........................... 197
Roof load ... ...................... 57, 138, 141, 214
Roof rac ks ............................ ..........141, 163
Running-in ................... ........................... 138
Brakes ...................... ......... .................. 154
S
Safeguard against
unauthorised use ..... .............. 9, 16, 27, 36
Safety a ccessories ............................ ..... 176
Safety net ........... ............................... ....... 55
Safety system s ... ............................... ..... 114
Saving energy .............................. .......... 138
Seat ad justment ........ .................... 3, 43, 50
Seat belts ............................ ............. 62, 204
Seat height adjustment .............. ........ 3, 44
Seat occupancy recognition ... ................ 73
Seat position ...... ............................ 3, 43, 44
Seats . ......... ............................... ............ 3, 43
Extending the luggage
compartment . ............................... .32, 52
Heated sea ts .................. ...................119
Selector lever ...................... ................... 133
Self-diagnosis .... ........................60, 73, 157
Self-help
Central lock ing sy stem ............ ............ 31
Electric windows ............................... ... 39
Informa tion display ............. ................ 94
Radio frequenc y remote control ........ 29
Self-help, vehicle care .............. ............. . 170
Service interval d isplay .. ......... .............. 226
Service work ....... ............................... ..... 226
Sid e airba gs ........................ ..................... 69
Sig nal system ......... ............................ 10, 11
Spare keys ..... ............................... ............ 26
243Ind ex
Spa re wheel ............. .......................177, 178
Speed ...... ........ ............................... .140, 141
Fuel consumption ......................140, 141
Speedom eter .. .............. ............................ 89
Starter switch ................... .................. 14, 27
Starting the engine ............. 9, 27, 133, 171
Self-help ........... ............................... .... 171
Steam-jet cleaners .. ......... ..... 166, 203, 205
Steering column lock .................... .......9, 15
Steering wheel ad justment .. ........ ............. 9
Steering wheel remote control ........24, 114
Stowage comp artments .. ........................81
Sunroof ....... ............................... ...............41
Fault ............ ............................... ...........42
Sunshad e ............................... ...................42
Sunvisors ......... ......... ............................... ..83
System settings ............................. ...........96
T
Ta bles ............. ............................... ........... 83
Ta chom eter .... ............................... ........... 89
Ta ilgate............... ............................... ....... 36
Ta il lights ... ............................... .............. 105
Bulb replacem ent ... ........................... 197
Technical data ................. ...................... 206
Telep hone, see Mobile telephone ........ 116
Temperature regula tion ......... ......120, 127
Temporary spa re wheel .. ..............162, 178
The first 600 miles (1000 km) ............... 138
Tig htening torque ............ ..............182, 216
Tim e .................... ............................... ....... 94
Toll system s ................. ......... .................. 115
Tools .. ............. ............................... ......... 176
Towing ............ ............................... ......... 173
Towing equipment .................. ..............163
Towing eye ........................... ..........173, 175
Tra iler / caravan towing ......... .............. 138
Tra nsmission ........... ............................... .. 13
Tra nsmission, Easytronic ...................... 132
Driving programm es .................... ..... 134
Fault .............................. ...................... 137
Interruption of power supply ............ 137
Kic kdown ............. ............................... 135
Selector lever .. .............................. 13, 133
Winter programm e . ........................... 135
Travel Assistant . ............................... .22, 47
Tread depth .. ............................... .......... 160
Trip comp uter ..................... ......... ...... 23, 99
Trip odometer .............................. ............ 89
Triple Informa tion Display .......... ............ 92
Turn lighting (AFL) .......... ....................... 109
Turn signal lig hts ... .......................... 10, 106
Bulb replacement ........... ......... ..196, 197
Twin Audio ......... .............................. 24, 115
Tyre chains .... ............................... ..162, 216
Tyre condition ................. ....................... 160
Tyre pressure ............. ....................159, 216
Tyre repair kit ............ ............................ 182
Tyres . ............................... ....................... 158
244 Index
U
Units of m easure ................... ...................98
Unlead ed fuel ...............142, 145, 208, 209
Used oil ... ............................... ................. 229
V
Valve cap key ..... ............................... .... 159
Vauxhall Service .............. ......................224
Vehicle care ............. ......... ...................... 202
Vehicle decomm issioning ...................... 237
Vehicle identification number ............... 207
Vehicle keys, see Keys . ............................26
Vehicle recommissioning . ...................... 237
Ventilation ........... .................. 117, 121, 129
W
Warning buzzers .... ............................... 103
Warning triangle .............................. ..... 176
Wash fluid reservoir,
windsc reen w ash system ..................... 234
Weights .......... ............................... ......... 214
Welcome light function ... ...................... 110
Deactivate................ ........................... 110
Wheels ................ ......... ........................... 158
Windows .... .............. ............................... .. 38
Demisting and defrosting .122, 125, 128
Windscreen wash system .... ....11, 104, 234
Anti-freeze protec tion ......... ..............234
Capacities ............... ...................219, 220
Wash fluid reservoir ...................... ..... 234
Windscreen wiper ... .................11, 103, 233
Winter mode
Starting-off aid .................... .............. 135
Winter op eration
Battery ..................... ............. .............. 139
Coolant, a nti-freeze ..................... ..... 230
Fuel consum ption ............ .................. 141
Fuel for diesel engines .......................142
Heating .. ......... ............................... ..... 117
Locks ............................. ...................... 204
Tyre chains ..... ............................162, 216
Window demisting
and d efrosting ...................122, 125, 128
Windscre en wa sh sys tem,
anti-freeze protection . ............. .........234
Winter prog ramme .............. ............. .....135
Winter tyres ...................... ...................... 216
X
Xenon headlight system
Bulb replacement ........... ......... .......... 193
Driv ing abroad .................... .............. 113
MERIVA
©Copyright by Vauxhall Motors Ltd., England.
Reproduction or translation, in whole or in parts, is not
permitted without prior written consent from Vauxhall Motors
Ltd.
All rights as understood under the copyright laws are explicitly
reserved by Vauxhall Motors Ltd.
All information, illustrations and specifications contained in this
manual are based on the latest production information
available at the time of publication.
The right is reserved to make changes at any time without
notice.
Edition: January 2007.
TS 1578-B-07
MERIVA
Operation, Safety and Maintenance
Owners Manual
247


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vauxhall Meriva 2007 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vauxhall Meriva 2007 in the language / languages: English as an attachment in your email.

The manual is 4,66 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info