529273
160
Zoom out
Zoom in
Previous page
1/195
Next page
158 Vehicle care
If the tyre pressure shall be reduced,
switch off ignition before reducing.
Sensor matching process -
Manual
Each tyre pressure monitoring
system sensor has a unique
identification code. The identification
code needs to be matched to a new
tyre/wheel position after rotating the
vehicle's tyres or replacing one or
more of the sensors.
A and the DIC message should go off
at the next drive cycle. The sensors
are matched to the tyre/wheel
positions, using a tyre pressure
monitoring system relearn tool, in the
following order: left front tyre, right
front tyre, right rear tyre and left rear
tyre. Ask your Authorised Vauxhall
Ampera Repairer for service or to
purchase a relearn tool.
There are two minutes to match the
first tyre/wheel position and
five minutes overall to match all four
tyre/wheel positions. If it takes longer,
the matching process stops and must
be restarted.
Follow the tyre pressure monitoring
system sensor matching process:
1. Set the parking brake.
2. Switch the ignition on and place
the vehicle in P.
3. If the DIC display is minimised,
press the SELECT knob to
maximise it.
4. Use the SELECT knob to scroll to
the tyre pressure display screen.
5. Press and hold the SELECT knob
for five seconds to begin the
sensor matching process.
A message displays confirming to
begin the process.
6. Use the SELECT knob to select
Yes with the highlighted selection
and press the SELECT knob
again to confirm the selection.
The horn sounds twice to signal
the receiver is in relearn mode
and a message displays on the
DIC screen.
7. Start with the left front tyre.
8. Place the relearn tool against the
tyre sidewall, near the valve stem.
Then press the button to activate
the tyre pressure monitoring
system sensor.
A horn chirp confirms that the
sensor identification code has
been matched to this tyre and
wheel position.
9. Proceed to the right front tyre and
repeat the procedure in Step 8.
10. Proceed to the right rear tyre and
repeat the procedure in Step 8.
11. Proceed to the left rear tyre and
repeat the procedure in Step 8.
The horn sounds two times to
indicate the sensor identification
code has been matched to the left
160


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Vauxhall Ampera 2012 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Vauxhall Ampera 2012 in the language / languages: English as an attachment in your email.

The manual is 5,01 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Vauxhall Ampera 2012

Vauxhall Ampera 2012 Additional guide - English - 95 pages

Vauxhall Ampera 2012 Quick start guide - English - 2 pages

Vauxhall Ampera 2012 User Manual - English - 195 pages

Vauxhall Ampera 2012 User Manual - English - 199 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info