581892
7
Zoom out
Zoom in
Previous page
1/15
Next page
POWXQG7571 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8.3 Adjusting the cutting height (5)
Before adjusting the cutting height, switch off the engine. Let the cutting blade come to a
complete standstill before making any adjustment of the cutting height. Adjustment can be
done either to the "+" or to the "-" direction. Adjustment takes place in steps. Make sure that
the adjustment lever securely snaps in at the desired height position.
9 OPERATION
9.1 Read the engine manual before using the lawn mower.
The lawn mower is delivered without engine oil: Add 0.6 litres of engine oil, before starting the
engine.
9.2 Starting the engine
After proper assembly of the lawn mower, start the engine as follows:
Put the lever on START or .
Pull the engine control lever (3) towards the handle. Pull the recoil starter, until resistance
is felt, and then pull it firmly.
When the engine runs, put the throttle (2) to the "RUN" position.
The blade starts to rotate after start-up of the engine. Keep the engine
control lever (3) in working position during operation of the lawn mower.
The engine will stop as soon as you release the engine control lever.
9.3 Self-propelling function
To activate the self-propelling function press the self-propelling lever (1) towards the handle.
WARNING: The lawn mower immediately starts moving. To stop the
movement, release the self propelling lever (1). The lawn mower will then
stop immediately.
9.4 Protective cover of the driving belt (Fig 3)
Do not try to open the protecting cover of the driving belt.
If the protecting cover of the driving belt is damaged, it must be replaced by the manufacturer,
your dealer or a person with a similar qualification.
10 4 IN 1
These lawn mowers can be retrofitted from its normal function, based on the application
purpose:
From lawn mower with rear discharge to:
Mulching mower or as side-discharge mower.
10.1 What is mulching
When mulching, the grass is cut in one working step, then finely chopped and returned to the
grass strip as natural fertilizer.
Hints for mulch-mowing:
Regular cut-back by max.2cm from 6cm to 4cm grass height.
Use a sharp cutting knife
Do not mow wet grass
Set to max. motor speed
Only move at working pace
Regularly clean mulching wedge, housing inner side and mowing blade
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varo POWXQG7571 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varo POWXQG7571 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POWXQG7571

Varo POWXQG7571 User Manual - German - 17 pages

Varo POWXQG7571 User Manual - Dutch - 16 pages

Varo POWXQG7571 User Manual - French - 17 pages

Varo POWXQG7571 Additional guide - All languages - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info