581870
7
Zoom out
Zoom in
Previous page
1/10
Next page
POWXG3009 EN
Copyright © 2014 VARO P a g e | 7 www.varo.com
8 OPERATION
8.1 Switching on/off
Connect the cable to the power.
To switch on, you need to keep the safety lock button (4) pressed in and then keep the
on/off switch (2) depressed.
To switch off, release the switch lever.
WARNING. The tool runs for approximately 5 seconds after it has been
switched off. Let the motor came to a complete stand still before setting the
tool down.
Follow these steps to operate the trimmer:
1. Make a loop with the extension cable and wrap it through the cord lock.
2. Place the end of the loop around cable securing hook and ensure it is pulled firmly
enough to prevent it coming loose while operating the trimmer.
3. Insert the plug into the extension cable.
4. Hold the trimmer at waist level.
5. Place the product on the right side of your body with the motor behind and away from
your body.
6. Start the trimmer and approach the area to be cut.
7. For best cutting, swing the trimmer gently from side to side and walk forward while
keeping the trimmer at an angle of 30 degrees to achieve best cutting results.
8. Do not overload your trimmer. It operates best at high speed.
9. To cut long grass, start at the top, take several small cuts. Never cut wet or very damp
grass.
10. After finishing the cutting operation, keep the head close to ground level, release the
switch and allow the motor to come to a complete stand still. Place the trimmer on the
ground, switch off and remove the cable plug from the mains supply.
Periodically clean out the grass between the knife and the rim of the guard
to prevent the tool from vibrating.
9 CLEANING AND MAINTENANCE
Your tool has been designed to operate over a long period of time with a minimum of
maintenance. Continuous satisfactory operation depends upon proper tool care and regular
cleaning.
Warning! Before performing any maintenance, switch off and unplug the
tool.
9.1 Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varo POWXG3009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varo POWXG3009 in the language / languages: English as an attachment in your email.

The manual is 0,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POWXG3009

Varo POWXG3009 User Manual - German - 11 pages

Varo POWXG3009 User Manual - Dutch - 11 pages

Varo POWXG3009 User Manual - French - 11 pages

Varo POWXG3009 Additional guide - All languages - 1 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info