POWP6040 EN
Copyright © 2019 VARO NV P a g e | 5 www.varo.com
▪ Always check that the supply voltage is the same as the voltage indicated on the
nameplate of the tool.
▪ Never reach with your hand or any other object into the mixing container during mixing.
▪ Always disconnect plug from power source before making any adjustment or changing any
accessory.
7 OPERATION
7.1 Preparation
Always unplug the machine from the mains before fitting a mixer bar.
▪ Mount mixing paddle (3 A+B) onto spindle (7) as illustrated (Fig.5).
▪ Connect plug to power source.
▪ Ensure the mixing container is securely positioned on the floor.
▪ Dip the mixing paddle into the substance to be mixed.
▪ Set wheel (2) to low speed.
Always use a mixer bar that is suitable for the material to be mixed/stirred.
Using an unsuitable mixer bar can unnecessarily overload both the
machine and yourself.
▪ To remove the mixer bar, unscrew it from the mixer
spindle in an anticlockwise direction. The mixer bar can
become rather tight in the holder. In that case, use a spanner
to keep the holder from turning.
7.2 Switching on and off (Fig. 2)
To switch the tool on, press the switch (1) and hold it down. To switch the tool off, release the
switch (1).
7.3 Continuous operation (Fig.3)
To switch on continuous operation: press the switch (1) up to the stop and at the same time
press the locking button (6). The switch (1) locks, and continuous operation is activated.
To switch off continuous operation: press the switch (1) again and then let go. The lock on
the switch (1) is released, and continuous operation is deactivated.
7.4 Speed preselection
The speed can be preselected steplessly with the speed controller (2).
The necessary speed depends on the type of material you wish to mix; we recommend practical
testing to determine the right speed. The electronic soft start ensures reaching the maximum
speed smoothly without a sudden impact when tool is switched on.
7.5 Gear selector switch
Two speed ranges can be selected with the gear selector switch (9) :
Gear 1 200 min-1 to 480 min-1,
