756759
10
Zoom out
Zoom in
Previous page
1/13
Next page
POWDPG80460 EN
Copyright © 2021 VARO P a g e | 10 www.varo.com
Never blow through nozzles or other components by mouth.
Avoid contact with plant control chemicals immediately change clothing contaminated
with plant control chemical.
Do not spray in windy conditions.
Too high or too low a pressure or unfavorable weather conditions can result in the wrong
solution concentration. Overdosing may damage plants and the environment. Underdosing
may result in unsuccessful plant treatment.
In order to reduce the risk of damage to the environment and plants, do not operate the
sprayer: i. pressure is too high or too low
ii. in windy conditions
iii. in direct sunlight
In order to reduce the risk of accidents and damage to the sprayer, never operate the
sprayer with: i. flammable liquids
ii. viscous or sticky liquids
iii. caustic or corrosive chemicals
iv. liquids hotter than 50°C
Avoid use the product in cold winter since the solution may be freeze.
10.4 Transportation and storage
Remove the battery pack.
Ensure that all parts are clean and dry.
Clean all foreign materials from the product.
Drain all spray materials from the spray tank before storage and transportation.
After each use, check all parts of the unit for leaks. Return the product to an authorized
service center for repair if has any.
The spray wand can be stored in the cradle.
For transportation, secure the product against movement or falling to prevent injury to
persons or damage to the product.
Store the product in a cool, dry and well-ventilated place that is inaccessible to children.
Keep away from corrosive agents such as garden chemicals and de-icing salts. Do not
store outdoors.
11 ASSEMBLY
WARNING: Switch off and remove battery from machine before adjusting or
cleaning!
11.1 Assembling the strap
Attach the strap (15) to the sprayer as shown in fig.4.
11.2 Assembling the spray nozzle
Install the gun bar and nozzle of choice on the gun handle as shown in fig.5.
12 OPERATION
12.1 Turning the sprayer ON/OFF (Fig.6 )
To turn the sprayer ON, depress the ON/OFF button (16).
To start the flow of liquid at the spray wand, depress the trigger (12).
To stop the flow of liquid at the spray wand, release the trigger (12).
To turn the sprayer OFF, depress the ON/OFF button again (16).
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varo POWDPG80460 DRUKSPROEIER at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varo POWDPG80460 DRUKSPROEIER in the language / languages: English as an attachment in your email.

The manual is 0,27 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POWDPG80460 DRUKSPROEIER

Varo POWDPG80460 DRUKSPROEIER User Manual - German - 14 pages

Varo POWDPG80460 DRUKSPROEIER User Manual - Dutch - 14 pages

Varo POWDPG80460 DRUKSPROEIER User Manual - French - 14 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info