Manual Varo POW63700 (page 7 of 13) (English)

581865

Zoom out

Zoom in

1/13

POW63700 EN

 Stop the blades if the lawnmower has to be tilted for transportation when crossing

surfaces other than grass and when transporting the lawnmower to and from the area to

be mowed.

 Do not tilt the machine when starting or switching on the motor, except if the machine has

to be tilted for starting in long grass. In this case, do not tilt it more than absolutely

necessary and tilt only the part which is away from the operator. Always ensure that both

hands are in the operating position before returning the machine to the ground.

 Switch on the lawnmower according to instructions and with feet well away from the

blades.

 Do not put hands or feet near or under rotating parts.

 Keep clear of discharge opening at all times.

 Never pick up or carry the lawnmower while the motor is running.

 Remove the plug from the socket:

 whenever you leave the machine

 before clearing a blockage

 before checking, cleaning or working on the lawnmower

 after striking a foreign object. Inspect the lawnmower for damage and make repairs as

necessary if the lawnmower starts to vibrate abnormally (check immediately).

 Keep all nuts, bolts and screws tight to be sure that the lawnmower is in safe working

condition.

 Check the grass catcher frequently for wear or deterioration.

 Replace worn or damaged parts for safety.

7 ASSEMBLY

The lawn mower is delivered unassembled. The complete push bar must be assembled before

using the lawn mower. Follow the operating instructions step-by-step and use the pictures

provided as a visual guide to easily assemble the machine.

7.1 Preparation

 Put the cable hook on upper handle (Fig. 1a)

 Connect upper and lower handles with supplied screws and knobs. (Fig. 1b)

 Insert the handles into the mower body. (Fig. 1c)

 Fit each wheels over the axles, secure in place with the “R” pins.

 Fix the cable holders. (Fig. 1e)

 Grasse collection box assembly. Assemble two halves and fix them together. (Fig. 1f)

 Lift the flap and place the grass box over the lugs. (Fig. 1g)

 Press the wheel covers into place (Fig. 1h).

8 SETTING THE CUTTING HEIGHTS

To obtain the desired cutting height, the front and rear axles are repositioned on the underside

of the mower housing.

Important! Adjust the cutting height only when the engine is switched off

and the power cable has been disconnected.

Before you begin to mow, check to ensure that the blade is not blunt and that none of the

fasteners are damaged. To prevent any imbalance, replace blunt and/or damaged blades. To

carry out this check, first switch off the motor and pull out the power plug.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Varo POW63700 in the language / languages: English as an attachment in your email.

The manual is 0,42 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varo POW63700

Varo POW63700 User Manual - German - 14 pages

Varo POW63700 User Manual - Dutch - 14 pages

Varo POW63700 User Manual - French - 14 pages

Varo POW63700 Additional guide - All languages - 4 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Varo POW63700 Manual

Product: