813318

Varde Shape Manual

15
Zoom out
Zoom in
Previous page
1/24
Next page
15
Maintenance:
Like any appliance under regular use, the stove will require routine maintenance.
Clean and inspect the appliance regularly, especially in periods of heavy use. Regular cleaning and
maintenance will help give many years of safe use.
Allow appliance to cool thoroughly to avoid risk of burns.
Clean regularly, according to level of use. Remove ashes, soot and tar from the combustion chamber.
The bafe should be removed for cleaning as the reverse side will be covered in soot. Do not allow ash
to build up as it may cause damage and adversely effect the performance of the appliance.
Warning: Ash can remain hot long after appliance has been in use.
Check that the smoke pathway through the ue pipe is clear. Inspect the rope seals in the door and
ashpan ensuring they still from a seal. Lubricate the door hinges if required.
Door Glass:
Keep the glass clean with correct use of the Airwash system and good quality fuel. Use the boost
setting to clear any build up. Sometimes additional cleaning may be required.
Before undertaking this operation allow appliance to cool fully. DO NOT clean hot glass.
The door glass should be cleaned using Varde Ovne glass cleaner, which should be available from
you local Varde Ovne dealer.
Before applying a cleaning agent remove any dust and loose soot with a damp cloth. Apply the
cleaning uid to a cloth before rubbing onto the glass. Apply carefully and do not apply excessively.
Do not apply directly onto the glass. Try to prevent any run off which could soak into the rope seals
around the edge of the glass. Remove dirt with a moist cloth and buff dry.
Some types of wood and solid fuel can cause a white residue to form on the glass. If this occurs
it should be cleaned off at least once a week during periods of heavy usage. If the liquid cleaning
agents recommended do not remove this residue use a dry cleaning pad which will help remove
these white marks.
Wood burns best on a bed of ash.
Do not allow ash to build up in the appliance as it will not burn properly and may cause
damage.
Open door, see Diagram on page 5. Remove ash with a small shovel. Take care not to damage the
ceramic lining of the appliance. Do not use sharp pointed pokers. Remove ash carefully - heat can
remain long after use. Pace the ash into a suitable container. Do not place hot ash in a container
made from plastic or any other combustible material.
If in doubt on how to clean your stove, contact your local Varde Ovne dealer or chimney sweep.
It is especially important to check the stove and chimney for blockages after a long period of non-use.
The enamel surface of the stove can wear down in places if the appliance is overheated. Worn
surfaces can be repaid with a Senotherm® spray paint, available from your local Varde Ovne dealer.
… 15 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Varde Shape at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Varde Shape in the language / languages: English as an attachment in your email.

The manual is 1.65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Varde Shape

Varde Shape Additional guide - English - 12 pages

Varde Shape User Manual - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info